GenericBattery protection board

لوحة حماية بطارية ليثيوم 9 أمبير 1S 3.7 فولت 18650 مع شريط نيكل | BMS Protection Board

⁨لوحة حماية بطارية ليثيوم 9 أمبير 1S 3.7 فولت 18650 مع شريط نيكل | BMS Protection Board⁩ — ⁨4,250 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Model XZ0013 for 1S cells
  • 3.7V and 9A rating
  • Reinforced with 6MOS
  • Nickel strip included
  • New, with a 1-month warranty
4,250IQD5,000IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,250IQD

Its price has held at 5,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

BMS protection board model XZ0013 for a 1S 3.7V 18650 lithium cell, rated 9A, with 6MOS and a nickel strip.

This is a BMS protection board, model XZ0013, made for 18650 lithium batteries at 3.7V in a 1S arrangement, meaning a single cell. It protects the cell from overcharge and deep discharge, and it is reinforced with 6MOS to carry a current of up to 9A, so it suits projects that draw more than the usual small protection boards allow.

The board comes with a nickel strip to make connecting it to the cell easier. Before buying, check that the battery capacity and the current your device draws match the board's specifications, because the protection circuits should only trip when needed. When installing, insulate the board fully from the battery body with a suitable insulating material to prevent short circuits, and solder quickly and carefully so the sensitive components do not overheat.

The listing describes the product as new, and the box holds a single board. It states a warranty of 1 month against manufacturing operating defects, excluding misuse. The listing does not give the board's dimensions, so ask the shop through chat if size matters for your build.

Suitable for

  • Protecting a single 18650 cell in a higher-current project
  • Building or repairing a small lithium battery pack
  • Electronics projects needing overcharge and deep-discharge protection

Seller's description

لوحة حماية بطارية ليثيوم 9 أمبير 1S 3.7 فولت

توفر لوحة الحماية BMS موديل XZ0013 حماية متقدمة لبطاريات الليثيوم 18650 بجهد 3.7 فولت، حيث تم تعزيزها بـ 6MOS لتتحمل تياراً يصل إلى 9 أمبير. هذا التصميم يجعلها مثالية للتطبيقات التي تتطلب تياراً مستمراً أعلى مع الحفاظ على سلامة الخلية من الشحن الزائد أو التفريغ العميق.

تتضمن اللوحة شريط نيكل مدمج لتسهيل عملية الربط، مما يضمن اتصالاً كهربائياً قوياً ومستقراً. عند اختيار هذه اللوحة، تأكد من أن سعة البطارية وتيارها يتناسبان مع مواصفات اللوحة لضمان تفعيل دوائر الحماية عند الحاجة فقط. يُعد هذا الموديل خياراً قوياً للمشاريع التي تتطلب كفاءة عالية في إدارة الطاقة.

عند التركيب، تأكد من عزل اللوحة بشكل كامل عن جسم البطارية باستخدام مواد عازلة مناسبة لمنع حدوث أي تماس كهربائي. يجب أن تتم عمليات اللحام بسرعة ودقة لتجنب ارتفاع درجة حرارة المكونات الحساسة على اللوحة.

المواصفات الفنية

  • الموديل: XZ0013
  • الجهد الاسمي: 3.7 فولت
  • تيار التشغيل: 9 أمبير
  • المكونات: 6MOS
  • الملحقات: شريط نيكل مرفق
  • التوافق: بطاريات 18650 ليثيوم أيون

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من 9A BMS Protection Board For 1S 3.7V 18650 Li-Ion Lithium Battery 6MOS with Nickel strip XZ0013.

Specifications

BrandGeneric
ModelXZ0013
Nominal voltage3.7 فولت
Operating current9 أمبير
Components6MOS
Compatibilityبطاريات 18650 ليثيوم أيون
الموديل أو اسم القطعة9A BMS Protection Board For 1S 3.7V 18650 Li-Ion Lithium Battery 6MOS with Nickel strip XZ0013
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X79516D77B66

Questions about لوحة حماية بطارية ليثيوم 9 أمبير 1S 3.7 فولت 18650 مع شريط نيكل | BMS Protection Board

It currently costs 4,250 IQD (was 5,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The listing says it is compatible with 18650 lithium-ion batteries at 3.7V in a 1S arrangement.
The listing gives an operating current of 9A, thanks to its 6MOS reinforcement.
Yes, the listing states that a nickel strip is included with the board.
The listing does not specify the dimensions, so ask the shop through chat before ordering.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.