GenericLithium battery protection board

لوحة حماية بطارية ليثيوم 6 أمبير 1S 3.7 فولت 18650 مع شريط نيكل | BMS Protection Board

⁨لوحة حماية بطارية ليثيوم 6 أمبير 1S 3.7 فولت 18650 مع شريط نيكل | BMS Protection Board⁩ — ⁨4,250 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • For 1S 3.7 volt 18650 batteries
  • Handles up to 6 amps
  • 4MOS design
  • Nickel strip included
  • New, with a 1-month warranty
4,250IQD5,000IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,250IQD

Its price has held at 5,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

BMS protection board model XZ0011 for a 1S 3.7 volt 18650 lithium battery, 6 amps with a 4MOS design and an included nickel strip.

The BMS protection board model XZ0011 regulates charging and discharging of 18650 lithium batteries at 3.7 volts in a 1S layout. Its design is based on 4MOS, and the listing says it handles current of up to 6 amps, giving more flexibility for devices that need slightly higher current than standard boards.

A nickel strip is included with the board to make direct connection to the battery easier, saving time and effort during assembly. The listed technical specifications are: model XZ0011, nominal voltage 3.7 volts, operating current 6 amps, components 4MOS, accessory nickel strip included, and compatibility with 18650 lithium-ion batteries.

Before use, check that the battery voltage matches the board's requirements, and make sure the device current does not exceed the maximum allowed so the protection system works properly. Handle the board carefully while soldering and make sure the positive and negative terminals are fixed in their correct places to avoid permanent damage; it is best placed in a well-ventilated spot inside the battery pack.

The listing does not state the board's dimensions, cut-off voltages or thermal protection type, so ask the shop through chat if those matter. One board comes in the box together with the strip. It is new, with a 1-month warranty against manufacturing operating defects; misuse is not covered.

Suitable for

  • Protecting single 18650 batteries
  • Assembling battery packs with the nickel strip
  • Powering devices drawing up to 6 amps

Seller's description

لوحة حماية بطارية ليثيوم 6 أمبير 1S 3.7 فولت

تعتبر لوحة الحماية BMS موديل XZ0011 خياراً ممتازاً لتنظيم شحن وتفريغ بطاريات الليثيوم 18650 بجهد 3.7 فولت. بفضل تصميمها الذي يعتمد على 4MOS، توفر هذه اللوحة قدرة تحمل تيار تصل إلى 6 أمبير، مما يمنحك مرونة أكبر في تشغيل الأجهزة التي تتطلب تياراً أعلى قليلاً مقارنة باللوحات القياسية.

يأتي مع هذه اللوحة شريط نيكل مخصص لتسهيل عملية التوصيل المباشر بالبطارية، مما يوفر وقتاً وجهداً في عمليات التجميع. قبل البدء في الاستخدام، تحقق من أن جهد البطارية يتوافق مع متطلبات اللوحة، وتأكد من أن تيار الجهاز المستخدم لا يتجاوز الحد الأقصى المسموح به للوحة لضمان عمل نظام الحماية بشكل صحيح.

يجب التعامل مع اللوحة بحذر أثناء اللحام، مع ضرورة التأكد من تثبيت الأقطاب في أماكنها الصحيحة (الموجب والسالب) لتجنب أي ضرر دائم. يُفضل وضع اللوحة في مكان جيد التهوية داخل حزمة البطارية لضمان استقرار الأداء.

المواصفات الفنية

  • الموديل: XZ0011
  • الجهد الاسمي: 3.7 فولت
  • تيار التشغيل: 6 أمبير
  • المكونات: 4MOS
  • الملحقات: شريط نيكل مرفق
  • التوافق: بطاريات 18650 ليثيوم أيون

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من 6A BMS Protection Board For 1S 3.7V 18650 Li-Ion Lithium Battery 4MOS with Nickel strip XZ0011.

Specifications

BrandGeneric
ModelXZ0011
Cell layout1S
Nominal voltage3.7 فولت
Operating current6 أمبير
Components4MOS
Accessoriesشريط نيكل مرفق
Compatibilityبطاريات 18650 ليثيوم أيون
الموديل أو اسم القطعة6A BMS Protection Board For 1S 3.7V 18650 Li-Ion Lithium Battery 4MOS with Nickel strip XZ0011
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategoryAutomotive, Mobility & Transport Electronics
More categoriesBattery-management systems
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-XC8E64E31E33

Questions about لوحة حماية بطارية ليثيوم 6 أمبير 1S 3.7 فولت 18650 مع شريط نيكل | BMS Protection Board

It currently costs 4,250 IQD (was 5,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Yes, the listing states that a nickel strip is included with the board.
6 amps operating current with a 4MOS design, according to the listing.
18650 lithium-ion batteries in a 1S layout at 3.7 volts.
XZ0011, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.