KF2510 connector set

طقم موصل KF2510 بثلاثة أطراف مسافة 2.54mm يشمل هيدر مستقيم وبيت وأطراف كبس | KF2510 3-Pin Connector Set 2.54mm Straight Header, Housing and Crimp Terminals

⁨طقم موصل KF2510 بثلاثة أطراف مسافة 2.54mm يشمل هيدر مستقيم وبيت وأطراف كبس | KF2510 3-Pin Connector Set 2.54mm Straight Header, Housing and Crimp Terminals⁩ — ⁨1,575 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • KF2510 at 2.54mm with 3 pins
  • Complete set: straight header, housing and crimp terminals
  • Keying and locking tab
  • Typical rating 250V / 3A
  • New, with a 1-month warranty
1,575IQD2,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,575IQD

Its price has held at 2,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

KF2510 connector set with 3 pins at 2.54mm, including a straight solder header, plastic housing and crimp terminals, for sensors and fans.

This is a complete connector set from the KF2510 family with 2.54mm pitch and 3 pins. It includes a straight male header that solders to the board (Through-Hole), a female plastic housing, and metal crimp terminals. The listing describes the model as compatible with 2.54mm connectors of the KK/2510 type.

The 3 pins suit a sensor with 3 wires (VCC, GND and signal) or a fan with a speed-sensing output. The keying feature in the plastic housing prevents reversed insertion, and the locking tab prevents accidental sideways disconnection and holds the connector against vibration. The terminals are tin over a copper base, the typical electrical rating is 250V / 3A, and the wire gauge is AWG 22 - 28.

It is used to connect 3-wire sensors in Arduino projects, link fans that have a speed-sensing output, and connect servos and small modules inside devices. Before buying, make sure your device's connector belongs to the KF2510 / KK family with 2.54mm pitch and 3 pins.

The installation tool named is an SN-28B crimping tool or similar, which is not listed in the box contents. Crimp the terminals and check that each one seats until you hear it settle in the housing, because an unseated terminal pulls out with the wire at the first tug.

The box contains a set with 3 pins including the straight header, the plastic housing and the crimp terminals. The condition is new and the warranty is 1 months.

Suitable for

  • Connecting 3-wire sensors in Arduino projects
  • Linking fans with a speed-sensing output
  • Connecting servos and small modules inside devices

Seller's description

طقم موصل كامل من عائلة KF2510 بمسافة 2.54mm وثلاثة أطراف، يضم الهيدر الذكر المستقيم الذي يُلحم على اللوحة، والبيت البلاستيكي الأنثى، وأطراف الكبس المعدنية. ثلاثة أطراف تناسب حساساً بثلاثة أسلاك (VCC وGND وإشارة) أو مروحة بمخرج قياس سرعة، ويمنع لسان القفل ومفتاح التوجيه الانفصال العرضي والتركيب بالمقلوب.

أبرز المزايا

  • ثلاثة أطراف بمسافة قياسية 2.54mm
  • مثالي لحساسات VCC/GND/Signal ومراوح الحاسبة
  • مفتاح توجيه يمنع عكس التوصيل عند التركيب
  • لسان قفل يثبّت الموصل ضد الاهتزاز
  • الطقم كامل: هيدر + بيت + أطراف كبس
  • أطراف مطلية بالقصدير لمقاومة تلامس منخفضة

الاستخدامات الشائعة

  • توصيل الحساسات ثلاثية الأسلاك في مشاريع Arduino
  • ربط المراوح ذات مخرج قياس السرعة
  • توصيل السيرفو والوحدات الصغيرة داخل الأجهزة

ملاحظة: اكبس الأطراف بكماشة SN-28B وتحقق من دخول كل طرف حتى يُسمع صوت استقراره داخل البيت؛ الطرف غير المستقر ينسحب مع السلك عند أول شدّة.

What's in the box

طقم واحد بثلاثة أطراف يشمل الهيدر المستقيم والبيت البلاستيكي وأطراف الكبس

Specifications

ModelKF2510
Pins3 Pin
Pitch2.54mm
Set contentsهيدر ذكر + بيت أنثى + أطراف كبس
Electrical ratingنموذجياً 250V / 3A
Wire gaugeAWG 22 – 28
MountingThrough-Hole باللحام للهيدر
شكل الهيدرمستقيم Straight للحام على PCB
آلية القفللسان قفل يمنع الانفصال العرضي
منع العكسمفتاح توجيه في البيت البلاستيكي
طلاء الأطرافقصدير على قاعدة نحاسية
أداة التركيبكماشة كبس SN-28B أو ما يماثلها
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0336

Questions about طقم موصل KF2510 بثلاثة أطراف مسافة 2.54mm يشمل هيدر مستقيم وبيت وأطراف كبس | KF2510 3-Pin Connector Set 2.54mm Straight Header, Housing and Crimp Terminals

It currently costs 1,575 IQD (was 2,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
A straight male header to solder on the board, a female plastic housing, and metal crimp terminals, with 3 pins.
The listing names an SN-28B crimping tool or similar, which is not included in the set contents.
The listing describes it as compatible with 2.54mm connectors of the KK/2510 type.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.