KF2510 connector set

طقم موصل KF2510 بطرفين مسافة 2.54mm يشمل هيدر مستقيم وبيت وأطراف كبس | KF2510 2-Pin Connector Set 2.54mm Straight Header, Housing and Crimp Terminals

⁨طقم موصل KF2510 بطرفين مسافة 2.54mm يشمل هيدر مستقيم وبيت وأطراف كبس | KF2510 2-Pin Connector Set 2.54mm Straight Header, Housing and Crimp Terminals⁩ — ⁨1,575 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Complete set: straight header, housing and crimp terminals
  • 2 pins at 2.54mm pitch
  • Locking tab and polarising key
  • Accepts AWG 22 – 28 wire
  • New, with a 1 months warranty
1,575IQD2,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,575IQD

Its price has held at 2,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

KF2510 2-pin connector set at 2.54mm pitch with a straight male header, female housing and crimp terminals, for fans, batteries and sensors on small boards.

This is a complete connector set from the KF2510 family at 2.54mm pitch with 2 pins, including a straight male header that solders onto the board, a female plastic housing and metal crimp terminals. The benefit is a full detachable connection without buying separate parts, instead of soldering wires directly to the board.

It has a locking tab that prevents accidental disconnection under vibration and light pulling, and a polarising key in the housing that prevents reversed installation. It accepts wire of AWG 22 – 28, the terminals are tin over a copper base, and the typical electrical rating is 250V / 3A. The header is through-hole and solders onto a PCB, while the terminal is crimped with a dedicated tool such as the SN-28B or similar; the listing warns that soldering the terminal instead of crimping it makes it stiff and breaks the wire neck over time.

The KF2510 type is compatible with 2.54mm KK/2510 connectors, so check that your board pitch matches. Listed uses are connecting fans and batteries on small boards, linking sensors and buttons inside hand-built devices, and power connections between two detachable boards. The item is new with a 1 months warranty, and the crimping tool is not listed in the contents.

Suitable for

  • Connecting fans and batteries on small boards
  • Linking sensors and buttons in hand-built devices
  • Power connections between two detachable boards

Seller's description

طقم موصل كامل من عائلة KF2510 بمسافة 2.54mm وبطرفين، يشمل الهيدر الذكر المستقيم الذي يُلحم على اللوحة، والبيت البلاستيكي الأنثى، وأطراف الكبس المعدنية. يوفر توصيلاً قابلاً للفصل بلسان قفل يمنع الانفصال العرضي مع الاهتزاز، وهو الخيار الشائع لتوصيل المراوح والبطاريات والحساسات في اللوحات الصغيرة بدل لحام الأسلاك مباشرة.

أبرز المزايا

  • مسافة قياسية 2.54mm متوافقة مع مخططات PCB الشائعة
  • لسان قفل يمنع خروج الموصل مع الاهتزاز والشد الخفيف
  • مفتاح توجيه في البيت يمنع التركيب بالمقلوب
  • الطقم كامل: هيدر + بيت + أطراف كبس بلا شراء قطع منفصلة
  • يقبل أسلاكاً بمقطع يوافق AWG 22 – 28
  • أطراف مطلية بالقصدير لمقاومة تلامس منخفضة

الاستخدامات الشائعة

  • توصيل المراوح والبطاريات في اللوحات الصغيرة
  • ربط الحساسات والأزرار داخل الأجهزة المصنّعة يدوياً
  • توصيلات خط التغذية بين لوحتين قابلتين للفصل

ملاحظة: اكبس الطرف بكماشة كبس مخصصة مثل SN-28B بحيث يمسك الجناح الخلفي العزل والأمامي النحاس المكشوف؛ لحام الطرف بدل كبسه يجعله قاسياً ويكسر عنق السلك مع الوقت.

What's in the box

طقم واحد بطرفين يشمل الهيدر المستقيم والبيت البلاستيكي وأطراف الكبس

Specifications

TypeKF2510
Pin count2 Pin
Pitch2.54mm
Set contentsهيدر ذكر + بيت أنثى + أطراف كبس
Header shapeمستقيم Straight للحام على PCB
Electrical rating250V / 3A
Wire gaugeAWG 22 – 28
Crimp toolكماشة كبس SN-28B أو ما يماثلها
آلية القفللسان قفل يمنع الانفصال العرضي
منع العكسمفتاح توجيه في البيت البلاستيكي
طلاء الأطرافقصدير على قاعدة نحاسية
طريقة التركيبThrough-Hole باللحام للهيدر
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0295

Questions about طقم موصل KF2510 بطرفين مسافة 2.54mm يشمل هيدر مستقيم وبيت وأطراف كبس | KF2510 2-Pin Connector Set 2.54mm Straight Header, Housing and Crimp Terminals

It currently costs 1,575 IQD (was 2,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
Yes, it includes a straight male header, a female plastic housing and crimp terminals.
It accepts wire of AWG 22 – 28, according to the listing.
The listing recommends crimping with a dedicated tool such as the SN-28B or similar; soldering makes it stiff and breaks the wire neck over time.
The listing does not list it in the contents, so ask the shop through chat if you need one.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.