Spring terminal block
ترمينال زنبركي KF142R بخمسة أطراف مسافة 5.08mm للوحات الإلكترونية | KF142R 5-Pin 5.08mm PCB Spring Terminal Block
ترمينال زنبركي KF142R بخمسة أطراف مسافة 5.08mm للوحات الإلكترونية | KF142R 5-Pin 5.08mm PCB Spring Terminal Block — 1,925 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 5 pins at 5.08mm pitch
- Spring clamp, no screws
- Through-Hole soldering onto PCB
- Stranded wire needs a ferrule
- New, with a 1-month warranty
Ask about stock or request a better price
Price
1,925IQDIts price has held at 2,750 IQD for the last 11 days.
About this item
KF142R spring terminal block with 5 pins at 5.08mm pitch, soldered onto the board and wired by push-in spring instead of screws.
The KF142R is a PCB terminal block with 5 pins at 5.08mm spacing that uses a spring clamp instead of screws. You press the release slot with a small flat screwdriver, insert the wire, then release, and the spring holds it, so there is no screw to tighten.
According to the listing this is faster to wire and does not loosen with vibration the way screws can, which suits boards in moving environments or ones where wires are changed often. The wire enters from the top with a release slot beside it, and the terminal is soldered to the board as a Through-Hole PCB part.
On numbers, the listing gives a typical rating of 300V / 10A for this size and an accepted wire cross-section of about 0.2 – 1.5mm². The body is engineering plastic that resists soldering heat. Before buying, check that your circuit load and wire thickness fit these limits and that 5.08mm pitch matches the footprint on your board.
Solid wires go in directly, while the listing says stranded wires need a ferrule for a safe connection, because loose strands can short two neighbouring pins. Listed uses include LED lighting boards, alarm systems, sensors, control boards, prototypes and distributing signal and low-current supply lines.
The part is new with a 1-month warranty, and the box holds one 5-pin spring terminal block.
Suitable for
- LED lighting boards and alarm systems
- Control boards exposed to vibration
- Prototypes where wires change often
- Distributing signal and low-current supply lines
Seller's description
ترمينال لوحة إلكترونية بخمسة أطراف ومسافة 5.08mm من طراز KF142R، يعتمد آلية ربط زنبركية بدل البرغي. يكفي الضغط على فتحة التحرير بمفك مسطح صغير وإدخال السلك ثم رفع الضغط ليمسك الزنبرك السلك تلقائياً. هذا الأسلوب أسرع في التوصيل ولا يرتخي مع الاهتزاز مثل البراغي، ويناسب اللوحات التي تُركّب في بيئات متحركة أو تحتاج توصيلاً سريعاً متكرراً.
أبرز المزايا
- ربط زنبركي سريع بلا براغي ولا أدوات كبس
- خمسة أطراف بمسافة قياسية 5.08mm على قاعدة واحدة
- ضغط الزنبرك ثابت فلا يرتخي التوصيل مع الاهتزاز والحرارة
- يقبل أسلاكاً صلبة مباشرة والمجدولة مع كُمّ ضغط ferrule
- يوفر وقتاً كبيراً في اللوحات ذات التوصيلات الكثيرة
الاستخدامات الشائعة
- لوحات الإنارة LED وأنظمة الإنذار والحساسات
- لوحات التحكم التي تُركّب في أماكن اهتزاز
- النماذج الأولية التي يتكرر فيها تغيير الأسلاك
- توزيع خطوط الإشارة والتغذية منخفضة التيار
ملاحظة: لا تدفع السلك المجدول بلا تحضير، فالخيوط المتفرقة قد تسبب تماساً بين طرفين متجاورين؛ استخدم كُمّ ضغط (ferrule) أو اختر سلكاً صلباً بمقطع مناسب.
What's in the box
ترمينال زنبركي واحد بخمسة أطراف
Specifications
| Model | KF142R |
|---|---|
| Pin count | 5P |
| Pitch | 5.08mm |
| Clamp type | زنبركية Push-in/Spring بلا براغي |
| Electrical rating | 300V / 10A |
| Accepted wire size | 0.2 – 1.5mm² |
| Mounting | Through-Hole باللحام على PCB |
| Body material | بلاستيك هندسي مقاوم لحرارة اللحام |
| أداة التوصيل | مفك مسطح صغير للضغط على فتحة التحرير |
| مقاومة الاهتزاز | ضغط الزنبرك ثابت ولا يحتاج إعادة شد |
| اتجاه دخول السلك | علوي مع فتحة تحرير مجاورة |
| الأسلاك المجدولة | تحتاج كُمّ ضغط ferrule للتوصيل الآمن |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0573 |




