Screw terminal block

ترمينال برغي KF1000 بطرفين مسافة 10mm للوحات الإلكترونية 300V 25A | KF1000 2-Pin 10mm Pitch PCB Screw Terminal Block 300V 25A Black

⁨ترمينال برغي KF1000 بطرفين مسافة 10mm للوحات الإلكترونية 300V 25A | KF1000 2-Pin 10mm Pitch PCB Screw Terminal Block 300V 25A Black⁩ — ⁨1,925 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • KF1000 2-pin screw terminal
  • 10mm pitch between pins
  • 300V / 25A rating
  • Accepts wire up to about 6mm² (AWG 10)
  • Black body, stackable side by side
1,925IQD2,750IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,925IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

KF1000 2-pin screw terminal with 10mm pitch and a 300V / 25A rating, soldered onto a board for higher currents.

The KF1000 is a 2-pin screw terminal designed for higher currents than the common 5.08mm terminals. The pitch between pins is 10mm, the electrical rating is 300V / 25A, and it is soldered to the printed board in Through-Hole style.

Its body is black and wide, with a larger screw and nut that accept thick wire up to about 6mm² (AWG 10). The pins are copper plated with a thick cross-section for high current, and the body is engineering plastic resistant to soldering heat. The listing notes that the thick pins reduce contact resistance and heat at high current.

The wire enters horizontally from the board edge, clamping is by a top screw with a pressure nut, and the block can be stacked side by side to add more positions. It is typically used for battery inputs, transformer outputs, inverter boards, power supplies, motor feeds and solar systems.

An important note from the listing: the 25A rating assumes a wide copper track on the board and a suitable wire cross-section, since a thin track can overheat and burn before the terminal does, and both pins should be soldered with enough solder. The product is new, the box holds one 2-pin KF1000 terminal, with a 1 months warranty.

Suitable for

  • Battery inputs and transformer outputs
  • Inverter boards and power supplies
  • Motor feeds and solar power systems

Seller's description

ترمينال برغي بطرفين من طراز KF1000 بمسافة كبيرة 10mm بين الأطراف وتصنيف 300V و25A، مصمم لتيارات أعلى بكثير من ترمينالات 5.08mm الشائعة. الجسم الأسود العريض يتيح صامولة وبرغياً أكبر يقبلان أسلاكاً غليظة، وأطرافه السميكة تُلحم على اللوحة لتحمل مرور التيار العالي. يُستخدم في مداخل البطاريات ومخارج المحولات ولوحات العاكسات ومزودات الطاقة.

أبرز المزايا

  • تصنيف تيار يصل إلى 25A وفولتية حتى 300V
  • مسافة 10mm بين الأطراف تعطي مسافة عزل أكبر بين الخطين
  • برغي وصامولة كبيران يقبلان أسلاكاً حتى نحو 6mm² (AWG 10)
  • أطراف سميكة تقلل مقاومة التلامس والحرارة عند التيار العالي
  • جسم بلاستيكي أسود صلب مقاوم لحرارة اللحام

الاستخدامات الشائعة

  • مداخل البطاريات ومخارج المحولات في لوحات القدرة
  • لوحات العاكسات ومزودات الطاقة عالية التيار
  • مغذيات المحركات وأنظمة الطاقة الشمسية
  • لوحات توزيع التغذية في الأنظمة الصناعية

ملاحظة: تصنيف 25A يفترض مسار نحاس عريضاً ومقصدراً وسلكاً بمقطع مناسب؛ المسار الرفيع سيسخن ويحترق قبل الترمينال. وتأكد من لحام الطرفين بكمية قصدير كافية لأن التيار العالي يكشف اللحام الضعيف.

What's in the box

ترمينال KF1000 واحد بطرفين

Specifications

ModelKF1000
Number of pins2P
Pitch10mm
Electrical rating300V / 25A
Accepted wireحتى نحو 6mm² (AWG 10)
Colorأسود
طريقة الربطبرغي علوي مع صامولة ضغط
طريقة التركيبThrough-Hole باللحام على PCB
اتجاه دخول السلكأفقي من جانب اللوحة
مادة الجسمبلاستيك هندسي مقاوم لحرارة اللحام
مادة الموصلنحاس مطلي بمقطع سميك للتيار العالي
التوسعةقابل للرصّ جانبياً لزيادة عدد الأطراف
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0267

Questions about ترمينال برغي KF1000 بطرفين مسافة 10mm للوحات الإلكترونية 300V 25A | KF1000 2-Pin 10mm Pitch PCB Screw Terminal Block 300V 25A Black

It currently costs 1,925 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
300V / 25A according to the listing, provided the board has a wide copper track and a suitable wire.
Wire up to about 6mm² (AWG 10), according to the listing.
Yes, the listing says it can be stacked side by side to increase the number of positions.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.