Push button switch

مفتاح ضغط ذاتي القفل KAN-28 قياس 18x12mm بتيار 1.5A | KAN-28 Self-Locking Push Button Switch 18x12mm, 1.5A 250VAC Flashlight Tail Switch

⁨مفتاح ضغط ذاتي القفل KAN-28 قياس 18x12mm بتيار 1.5A | KAN-28 Self-Locking Push Button Switch 18x12mm, 1.5A 250VAC Flashlight Tail Switch⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Self-locking action, no continuous supply needed
  • Rated 1.5A at 250VAC
  • 18 x 12 mm body
  • SPST contacts with a pair of terminals
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

KAN-28 self-locking push button switch, 18x12mm, rated 1.5A at 250VAC, suited to flashlight tails and small project boxes.

The KAN-28 is a self-locking (latching) push button switch: a press keeps it in the on position and pressing again switches it off. The mechanism is purely mechanical, so it holds its state without any continuous supply, which makes it a sensible ON/OFF button for flashlights, hand torches and small devices.

The listing rates it at 1.5A at 250VAC with an SPST contact system and a pair of terminals, alternating between open and closed on each press. The 18 x 12 mm body is compact enough for a flashlight tail or a hole in a project box. The body is insulating plastic with metal terminals, and it mounts inside the flashlight tube or in a hole on the enclosure.

Check the current you plan to pass through it before buying. The listing stresses that 1.5A is the maximum, so it should not carry the current of a large battery pack or a motor directly; use it to drive a MOSFET or relay that handles the heavy current. It suits small lighting loads, low-current batteries and LED circuits.

The box contains a KAN-28 self-locking push button switch. The condition is new and the stated warranty is 1 month.

Suitable for

  • Power switch in flashlight and torch tails
  • ON/OFF button for hand-built project boxes
  • Battery supply cut-off in a portable device
  • Switch for LED and low-power lighting circuits

Seller's description

مفتاح ضغط ذاتي القفل من طراز KAN-28 بأبعاد 18x12mm، يبقى في وضع التشغيل بعد الضغطة الأولى ويفصل عند الضغطة الثانية. مصنّف عند 1.5A و250VAC، وهو المفتاح المستخدم عادةً في مؤخّرة الكشّافات والمصابيح اليدوية وفي الأجهزة الصغيرة التي تحتاج زر ON/OFF ميكانيكياً لا يحتاج تغذية للحفاظ على حالته.

أبرز المزايا

  • عمل ذاتي القفل (Latching) يحتفظ بالحالة دون تغذية مستمرة
  • تصنيف تلامس 1.5A عند 250VAC يغطي أحمال الإنارة الصغيرة
  • أبعاد مدمجة 18x12mm تناسب مؤخّرة الكشّافات وعلب المشاريع
  • ملمس ضغط واضح يؤكّد تبديل الحالة للمستخدم
  • بناء ميكانيكي بسيط يتحمّل آلاف دورات التشغيل

الاستخدامات الشائعة

  • مفتاح تشغيل في مؤخّرة الكشّافات والمصابيح اليدوية
  • زر ON/OFF لعلب المشاريع والأجهزة المصنّعة يدوياً
  • قطع تغذية بطارية أو حزمة 18650 في جهاز محمول
  • مفتاح تشغيل لدوائر الليد والإنارة منخفضة القدرة

ملاحظة: راعِ أن التصنيف 1.5A هو الحد الأقصى، ولا تمرّر عبره تيار حزمة بطاريات كبيرة أو محرّك مباشرة، بل استخدمه للتحكّم بموسفت أو ريلاي يتولّى التيار العالي.

What's in the box

مفتاح ضغط ذاتي القفل KAN-28 واحد.

Specifications

ModelKAN-28
Switch typeضغط ذاتي القفل
Dimensions18 × 12 mm
Contact rating1.5A عند 250VAC
Contact systemSPST
Body materialبلاستيك عازل مع أطراف معدنية
عدد الأطرافطرفان
طريقة التركيبداخل أنبوب الكشّاف أو فتحة على علبة المشروع
الحفاظ على الحالةميكانيكي دون استهلاك تيار في وضع القفل
الاستخدام الأنسبأحمال إنارة وبطاريات منخفضة التيار
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0033

Questions about مفتاح ضغط ذاتي القفل KAN-28 قياس 18x12mm بتيار 1.5A | KAN-28 Self-Locking Push Button Switch 18x12mm, 1.5A 250VAC Flashlight Tail Switch

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
It stays on after the first press and switches off on the second press, without needing any supply to hold its state.
The listing says 1.5A is the maximum and advises against passing a motor or large battery pack current through it directly; use it to control a MOSFET or relay instead.
It measures 18 x 12 mm and has a pair of terminals with an SPST contact system, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.