KADARework station

محطة ريوورك KADA 852D+ اثنان في واحد هوت اير مع كاوية لحام | KADA 852D+ 2-in-1 SMD Rework Station, Hot Air Gun with Soldering Iron

⁨محطة ريوورك KADA 852D+ اثنان في واحد هوت اير مع كاوية لحام | KADA 852D+ 2-in-1 SMD Rework Station, Hot Air Gun with Soldering Iron⁩ — ⁨96,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Hot air gun and soldering iron in one unit
  • Diaphragm compressor, not a fan
  • Separate digital temperature control for each unit
  • Hot air about 100°C – 480°C
  • AC 220V and about 700W
  • New, with a 1-month warranty
96,500IQDLimited stock
1

Ask about stock or request a better price

Price

96,500IQD

Its price has held at 96,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

KADA 852D+ rework station combining a hot air gun and a soldering iron, each with its own digital temperature control, and a diaphragm compressor for the air flow.

The KADA 852D+ is a 2-in-1 rework station that combines a hot air gun and a precision soldering iron in one unit, with separate temperature control for each. It suits repair workshops for phones, laptops and TVs, and soldering work that needs controlled heat.

The key feature the listing stresses is that the air source is a diaphragm compressor, not a fan, giving a stronger and steadier air flow that is not affected by hose length, and it says the operating life is much longer. That choice matters for continuous work in a daily repair workshop.

The hot air temperature range is about 100°C – 480°C and the soldering iron range is about 200°C – 480°C, with separate digital control for each unit and an air speed adjustment knob. The operating voltage is AC 220V and the approximate power is about 700W in total. The station comes with a hot air handle and an iron handle with several air nozzles suited to different chip sizes.

Uses include removing and fitting SMD chips and surface components, repairing phone and laptop boards, and fixing TV and receiver boards. A caution from the listing: do not switch the unit off at the main switch right after using the hot air; let it finish its cooling cycle until the heating element cools, because repeated sudden shutdown can burn out the heating element. The item is new with a 1-month warranty, and the box holds one station with both handles and air nozzles.

Suitable for

  • Removing and fitting SMD chips and surface components
  • Repairing phone and laptop boards
  • Repairing TV and receiver boards

Seller's description

محطة ريوورك اثنان في واحد تجمع مسدس هواء ساخن وكاوية لحام دقيقة في جهاز واحد بتحكّم منفصل بدرجة الحرارة لكل منهما. الميزة الجوهرية في هذا الموديل أن مصدر دفع الهواء كومبريسر دايفرام وليس مروحة، فيعطي دفعاً أقوى وأكثر ثباتاً ولا يتأثر بطول الخرطوم، كما أن عمره التشغيلي أطول بكثير.

أبرز المزايا

  • هوت اير وكاوية لحام في جهاز واحد بتحكّم حراري مستقل
  • كومبريسر دايفرام يعطي دفع هواء قوياً وثابتاً
  • ضبط رقمي لدرجة الحرارة وسرعة الهواء
  • مناسب للعمل المستمر في ورش الصيانة اليومية
  • رؤوس هواء متعددة تناسب أحجام الرقائق المختلفة

الاستخدامات الشائعة

  • فك وتركيب رقائق SMD والمكونات السطحية
  • صيانة لوحات الموبايلات واللابتوبات
  • تصليح لوحات التلفزيونات وأجهزة الاستقبال
  • أعمال اللحام الدقيق التي تحتاج حرارة مضبوطة

ملاحظة: لا تطفئ الجهاز من المفتاح الرئيسي مباشرة بعد استعمال الهوت اير؛ اتركه يكمل دورة التبريد حتى يبرد عنصر التسخين، فالإطفاء المفاجئ المتكرر هو السبب الأول لاحتراق عنصر التسخين.

What's in the box

محطة KADA 852D+ واحدة مع قبضة الهواء الساخن وقبضة الكاوية ورؤوس هواء

Specifications

BrandKADA
ModelKADA 852D+
Typeمحطة ريوورك اثنان في واحد (هوت اير + كاوية)
Air sourceكومبريسر دايفرام (وليس مروحة)
Hot air temperature rangeنحو 100°C – 480°C
Soldering iron temperature rangeنحو 200°C – 480°C
Operating voltageAC 220V
Approximate powerنحو 700W إجمالاً
التحكم بالحرارةرقمي منفصل لكل وحدة
التحكم بتدفق الهواءمقبض ضبط سرعة الهواء
الملحقاتقبضة هواء وقبضة كاوية مع رؤوس
CategoryTools, Soldering & Workshop Equipment
More categoriesDesoldering & rework tools
ConditionNew
Warranty1-month warranty
SKUNTK-0892

Questions about محطة ريوورك KADA 852D+ اثنان في واحد هوت اير مع كاوية لحام | KADA 852D+ 2-in-1 SMD Rework Station, Hot Air Gun with Soldering Iron

It currently costs 96,500 IQD from Nanotik on SinaaStore (updated 16 November 2026).
Hot air about 100°C – 480°C and the soldering iron about 200°C – 480°C, according to the listing.
No, the air source is a diaphragm compressor, not a fan, according to the listing.
The operating voltage is AC 220V and the approximate power is about 700W in total.
Let it finish its cooling cycle until the heating element cools before switching off at the main switch.
Yes, Nanotik has it in stock, in limited quantity. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.