JYDSoldering flux paste
فلكس لحام معجون JYD مخصص للوحات PCB | JYD Soldering Flux Paste for PCB
فلكس لحام معجون JYD مخصص للوحات PCB | JYD Soldering Flux Paste for PCB — 4,463 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Paste flux for PCB work
- Removes oxidation from copper
- Stays in place during heating
- Works with desoldering wick
- New, with a 1-month warranty
Ask about stock or request a better price
Price
4,463IQDIts price has held at 5,250 IQD for the last 11 days.
About this item
JYD soldering flux paste for PCB work; it removes oxidation from copper and helps solder spread on pads and component legs.
JYD soldering flux paste is aimed at PCB work. It is applied to pads and component legs before the iron passes over them, removing the thin oxidation on copper and letting solder spread in a clean cone shape. The listing notes that correct flux use is the difference between a shiny, solid joint and a cold, balled-up one.
Apply a thin layer with a brush on pads and legs; the paste stays in place during heating. It also helps when pulling solder with Desoldering Wick, and it reduces solder bridges between closely spaced legs. It suits through-hole and surface-mount components on PCBs, re-soldering cold and cracked joints, and removing excess solder when taking parts off.
Use only a thin layer, because excess flux leaves sticky residue that collects dust. Afterwards clean the board with a brush and isopropyl alcohol, especially around high-resistance circuits. It comes in a tub with a tight lid and should be stored somewhere cool and dry, away from the sun. The listing does not state the tub weight. It is new with a 1-month warranty.
Suitable for
- Soldering through-hole and surface-mount parts on PCBs
- Re-soldering cold and cracked joints
- Removing excess solder when taking parts off
Seller's description
فلكس لحام معجون من JYD موجّه لأعمال لوحات PCB، يُدهن على الوسائد وأرجل المكونات قبل تمرير المكواة فيزيل الأكسدة الرقيقة عن النحاس ويجعل القصدير ينتشر بشكل مخروطي نظيف. الاستخدام الصحيح للفلكس هو الفرق بين نقطة لحام لامعة متماسكة ونقطة باردة متكوّرة قد تفصل لاحقًا مع الاهتزاز.
أبرز المزايا
- معجون مخصص لأعمال لوحات PCB والمكونات
- يحسّن ترطيب النحاس فتتشكل نقطة لحام مخروطية لامعة
- قوام يبقى في موضعه أثناء التسخين
- يفيد أيضًا في سحب القصدير بشريط النحاس Desoldering Wick
- عبوة بغطاء محكم تحافظ على القوام
- يقلل جسور القصدير بين الأرجل المتقاربة على اللوحة
الاستخدامات الشائعة
- لحام المكونات الفتيلية والسطحية على PCB
- إعادة لحام النقاط الباردة والمتشققة
- سحب القصدير الزائد عند فك المكونات
- أعمال الصيانة العامة للوحات الإلكترونية
- تجهيز الوسائد قبل تركيب الموصلات والهيدرات
ملاحظة: ضع طبقة رقيقة فقط، فالفلكس الزائد يترك بقايا لزجة تلتقط الغبار. نظّف اللوحة بعد الانتهاء بفرشاة وكحول أيزوبروبيل خصوصًا حول الدوائر عالية المقاومة.
What's in the box
علبة فلكس لحام JYD واحدة
Specifications
| Brand | JYD |
|---|---|
| Product type | فلكس لحام معجون للوحات PCB |
| Consistency | معجون يبقى في موضعه أثناء التسخين |
| Suitable for | المكونات الفتيلية والسطحية على PCB |
| العلامة | JYD |
| الوظيفة | إزالة الأكسدة وتحسين ترطيب النحاس |
| طريقة التطبيق | طبقة رقيقة بالفرشاة على الوسائد والأرجل |
| استخدام إضافي | مع شريط سحب القصدير Desoldering Wick |
| التنظيف بعد اللحام | فرشاة وكحول أيزوبروبيل |
| العبوة | علبة بغطاء محكم |
| التخزين | مكان بارد وجاف بعيدًا عن الشمس |
| Category | Manufacturing, Maker, Lab & Test Equipment |
| More categories | Lab power supplies and measurement instruments |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0404 |



