JST SH connector cable
كيبل موصل JST SH بخطوة 1.0mm و7 أطراف سلك 28AWG بطول 10cm | JST SH 1.0mm Pitch 7-Pin Wire-to-Board Connector Cable, 28AWG 10cm
كيبل موصل JST SH بخطوة 1.0mm و7 أطراف سلك 28AWG بطول 10cm | JST SH 1.0mm Pitch 7-Pin Wire-to-Board Connector Cable, 28AWG 10cm — 1,925 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- SH series, 1.0mm pitch, 7 pins
- Stranded 28AWG wire, 10cm long
- Keyed housing prevents reverse insertion
- About 1A per pin, up to 50V
- New, with a 1-month warranty
Ask about stock or request a better price
Price
1,925IQDIts price has held at 2,750 IQD for the last 11 days.
About this item
JST SH connector cable with 1.0mm pitch, 7 pins and 28AWG wire, 10cm long, for compact boards and small controllers.
This is a connector cable from the SH series with 1.0mm pitch between pins, carrying 7 lines of flexible stranded 28AWG wire and measuring 10cm. The contacts are crimped onto the wire at the factory, so it is ready to fit as a Wire-to-Board type.
The small 1.0mm pitch makes it a common choice on compact boards, small controllers and drone systems where there is not enough room for XH or PH connectors. The housing is keyed (Polarized) on one side so it cannot go in backwards, which protects against reversed polarity, and a plastic latch holds the connector in place and resists vibration.
The electrical details stated are about 1A per pin, a maximum operating voltage of 50V, tin-plated copper contacts and an operating range of -25°C to +85°C. It is typically used to connect sensors and small displays to control boards, flight and gyroscope modules in FPV systems, portable devices, and to replace a damaged cable inside a device with one of the same series.
Before buying, make sure your board or device uses the SH 1.0 series with exactly 7 pins; the listing names PH 2.0 and XH 2.54 as larger alternative series, so they are not interchangeable in size. When unplugging, pull on the housing body rather than the wire, since SH contacts are very small and come loose easily, and keep the soldering iron away from the plastic body because it deforms quickly.
The box contains an SH 1.0 connector cable with 7 pins and a length of 10cm. The condition is new and the warranty is 1 months.
Suitable for
- Connecting sensors and small displays to control boards
- Flight and gyroscope modules in FPV systems
- Portable devices and boards with tight space
- Replacing a damaged cable with the same series
Seller's description
كيبل موصل من نوع SH بخطوة 1.0mm بين الأطراف، يحمل سبعة خطوط بأسلاك مرنة مقاس 28AWG وطول 10cm. الخطوة الصغيرة جدًا تجعله الخيار الشائع في اللوحات المدمجة ووحدات التحكم الصغيرة وأنظمة الطائرات المسيّرة حيث لا تتوفر مساحة كافية لموصلات XH أو PH. جسم الحاضنة مشقوف من جهة واحدة فلا يدخل بالمقلوب، والأطراف مضغوطة على السلك من المصنع.
أبرز المزايا
- خطوة 1.0mm فقط، أي أقل من نصف خطوة XH2.54، ما يوفّر مساحة كبيرة على اللوحة
- سبعة خطوط مستقلة بأسلاك متعددة الشعيرات 28AWG تتحمل الثني المتكرر
- حاضنة مشقوفة تمنع التركيب المعكوس وتحمي من عكس القطبية
- قفل بلاستيكي يثبّت الموصل في مكانه ويقاوم الاهتزاز
- تحمّل كهربائي نموذجي للسلسلة يصل إلى 1A لكل طرف وحتى 50V
الاستخدامات الشائعة
- توصيل الحساسات والشاشات الصغيرة بلوحات التحكم
- وحدات الطيران والجيروسكوب في أنظمة FPV
- الأجهزة المحمولة واللوحات ذات المساحة الضيقة
- استبدال كيبل تالف داخل جهاز إلكتروني بنفس السلسلة
ملاحظة: اسحب الموصل من جسم الحاضنة لا من السلك عند الفصل، فأطراف SH صغيرة جدًا وتنخلع بسهولة، وتجنّب تقريب مكواة اللحام من الجسم البلاستيكي لأنه يتشوّه بسرعة.
What's in the box
كيبل موصل SH 1.0 واحد بسبعة أطراف وطول 10cm
Specifications
| Series | SH 1.0 |
|---|---|
| Pin pitch | 1.0mm |
| Number of lines | 7P |
| Wire gauge | 28AWG متعدد الشعيرات |
| Cable length | 10cm |
| Max current per pin | 1A تقريبًا |
| Max operating voltage | 50V |
| Contact material | نحاس مطلي بالقصدير |
| نوع الوصلة | Wire-to-Board |
| منع العكس | هيكل مشقوف Polarized |
| مدى حرارة التشغيل | -25°C إلى +85°C |
| سلاسل أكبر بديلة | PH 2.0 و XH 2.54 |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0420 |




