JST connector set
طقم موصل JST 1.25mm بثلاثة أطراف ذكر وأنثى مع أسلاك بطول 100mm | JST 1.25mm 3-Pin Connector Pair with 100mm Wires for Circuit Boards
طقم موصل JST 1.25mm بثلاثة أطراف ذكر وأنثى مع أسلاك بطول 100mm | JST 1.25mm 3-Pin Connector Pair with 100mm Wires for Circuit Boards — 1,750 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- JST connector pair, 1.25mm pitch
- 3 pins, male and female
- Pre-fitted colored 100mm wires
- No crimping tool needed
- New, with a 1 months warranty
Ask about stock or request a better price
Price
1,750IQDIts price has held at 2,500 IQD for the last 11 days.
About this item
JST 1.25mm 3-pin connector pair (male and female) with pre-fitted 100mm colored wires for small boards.
This is a fine-pitch JST connector pair with 1.25mm pitch and 3 pins (3 Pin), made of a male and a female connector with wires. The wires are different colors, 100mm long on each side, and are pre-fitted to the contacts, so no crimping tool is needed.
This fine pitch is smaller than PH2.0 and suits very small, crowded boards that cannot fit PH2.0 connectors, such as wireless communication modules, small cameras, portable device batteries and small drones. It gives a detachable link instead of soldering wires directly to the board, and lets you unplug a module for service without desoldering. The three lines in one connector are power, ground and signal.
The housing has a small lock to prevent accidental disconnection. Contacts at this size are relatively fragile, so insert the connector straight and do not twist it. The thin wire suits signals and small currents only and is not for power lines, so do not use it to carry large current.
Before buying, make sure your board uses the same 1.25mm pitch, 3 pins and the same pin order. The product is new, the box holds one connector pair with 100mm wires, with a 1 months warranty.
Suitable for
- Wireless modules and miniature cameras
- Portable device batteries and small drones
- Sensor links on crowded boards
Seller's description
زوج موصلات دقيق بخطوة 1.25mm وثلاثة أطراف، مركّب مسبقًا على أسلاك ملوّنة بطول 100mm لكل جهة. هذه الخطوة الناعمة تُستخدم في اللوحات الصغيرة جدًا التي لا تتسع لموصلات PH2.0 مثل وحدات الاتصال اللاسلكي والكاميرات الصغيرة وبطاريات الأجهزة المحمولة، وتوفّر وصلة قابلة للفصل بدل لحام الأسلاك مباشرة على اللوحة.
أبرز المزايا
- خطوة 1.25mm ناعمة تناسب اللوحات الصغيرة والمساحات الضيقة جدًا
- ثلاثة خطوط في موصل واحد: تغذية وأرضي وإشارة
- أسلاك ملوّنة بطول 100mm جاهزة ومركّبة مسبقًا
- حاضنة بقفل صغير تمنع الانفصال العرضي
- يوفّر عناء الكبس اليدوي على تماسات بهذا الحجم الدقيق
- يسمح بفصل الوحدة للصيانة دون فك اللحام
الاستخدامات الشائعة
- وحدات الاتصال اللاسلكي والكاميرات المصغّرة
- بطاريات الأجهزة المحمولة والدرونات الصغيرة
- وصلات الحساسات على اللوحات المزدحمة
- المشاريع التي تحتاج موصلًا أصغر من PH2.0
ملاحظة: التماسات بهذا القياس هشة نسبيًا؛ أدخل الموصل بشكل مستقيم ولا تلوِه، وتذكّر أن مقطع السلك الرفيع يناسب الإشارات والتيارات الصغيرة فقط ولا يصلح لخطوط القدرة.
What's in the box
زوج واحد: موصل JST 1.25mm ذكر وأنثى بثلاثة أطراف مع أسلاك 100mm
Specifications
| Contact pitch | 1.25mm |
|---|---|
| Number of pins | 3 Pin |
| Contents | زوج: موصل ذكر + موصل أنثى مع أسلاك |
| Wire length | 100mm |
| Lock type | قفل صغير على الحاضنة |
| تمييز الخطوط | أسلاك بألوان مختلفة |
| الحاجة إلى عدة كبس | لا — التماسات مركّبة مسبقًا |
| التيار المناسب | إشارات وتيارات صغيرة فقط |
| الميزة | أصغر من PH2.0 ويناسب اللوحات المزدحمة |
| احتياط التركيب | إدخال مستقيم دون لَيّ لحماية التماسات الدقيقة |
| الاستخدام | وحدات لاسلكية وكاميرات صغيرة وبطاريات محمولة |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0219 |




