Helping hand clamp
ماسكة مساعدة JM501 مع عدسة مكبرة 5X وملاقط تثبيت للحام والصيانة | JM501 Helping Hand Clamp with 5X Magnifying Glass
ماسكة مساعدة JM501 مع عدسة مكبرة 5X وملاقط تثبيت للحام والصيانة | JM501 Helping Hand Clamp with 5X Magnifying Glass — 7,650 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 5X magnifying lens
- Arms with alligator clips
- Heavy anti-tip base
- Adjustable, tightenable joints
- New, with a 1-month warranty
Ask about stock or request a better price
Price
7,650IQDIts price has held at 8,500 IQD for the last 11 days.
About this item
JM501 helping hand with a 5X magnifier and alligator-clip arms on a heavy base, holding the board or wire while you solder or inspect.
The JM501 is a helping hand, combining a 5X magnifying lens with arms ending in alligator clips on a heavy base. It holds the board or wire at the angle you want so both hands are free for the iron and solder, while the lens enlarges fine legs and small pads during soldering or inspection.
The arms are jointed with adjustable joints that tighten with screws to keep their position, and the heavy base stops the unit tipping when you press on it. The clips are metal with serrated teeth, and the listing warns that bare teeth can scratch the coating and short nearby tracks, so it recommends silicone covers or heat-shrink tube on them when holding PCBs. It is assembled by hand without tools.
It suits small boards, wires and light parts, and is used for soldering small components on PCBs, checking solder joints and hairline cracks, soldering thin wires and connector ends, fine craft work and holding parts while gluing. The listing does not state the dimensions or whether there is a light. It is new with a 1-month warranty, and the box holds one clamp with the lens and arms.
Suitable for
- Soldering small components on PCBs
- Inspecting solder joints and fine cracks
- Holding parts while gluing or assembling
Seller's description
ماسكة مساعدة تُعرف بـ Helping Hand تجمع بين عدسة مكبرة بقوة 5X وذراعين بملاقط تمساحية على قاعدة ثقيلة. تمسك اللوحة أو السلك في الزاوية التي تريدها فتتحرر يداك للمكواة والقصدير معًا، بينما تكبّر العدسة الأرجل الدقيقة والوسائد الصغيرة أثناء اللحام أو الفحص.
أبرز المزايا
- عدسة مكبرة بقوة 5X تظهر الأرجل الدقيقة وشقوق اللحام
- ذراعان مفصليان بملاقط تمساحية يثبتان القطعة بأي زاوية
- قاعدة ثقيلة تمنع انقلاب الجهاز أثناء الضغط عليه
- مفاصل قابلة للشد بمسامير للحفاظ على الوضعية
- تحرّر اليدين معًا فتصبح عملية اللحام أدق وأسرع
- تناسب اللوحات الصغيرة والأسلاك والقطع الخفيفة معًا
الاستخدامات الشائعة
- لحام المكونات الصغيرة على لوحات PCB
- فحص نقاط اللحام والشقوق الشعرية في اللوحات
- لحام الأسلاك الرفيعة وأطراف الموصلات
- أعمال الحرف الدقيقة وتصليح النظارات والمجوهرات
- تثبيت القطع أثناء اللصق أو التجميع اليدوي
ملاحظة: ضع أغطية سيليكون أو أنبوبًا حراريًا على أسنان الملاقط التمساحية عند مسك اللوحات، فالأسنان المعدنية العارية تخدش الطلاء وقد تقصّر المسارات القريبة.
What's in the box
ماسكة مساعدة واحدة مع عدسة مكبرة 5X وذراعين بملاقط
Specifications
| Model | JM501 |
|---|---|
| Magnification | 5X |
| Arms | ذراعان بملاقط تمساحية |
| Clip material | معدن بأسنان مشرشرة |
| نوع المنتج | ماسكة مساعدة (Helping Hand) مع مكبّرة |
| حركة الأذرع | مفاصل قابلة للشد والتوجيه |
| القاعدة | قاعدة ثقيلة مانعة للانقلاب |
| الاستخدام | لحام وفحص اللوحات والأعمال الدقيقة |
| التركيب | تُجمّع يدويًا بدون أدوات |
| احتياط الاستخدام | عزل أسنان الملقط عند مسك PCB |
| Category | Manufacturing, Maker, Lab & Test Equipment |
| More categories | Lab power supplies and measurement instruments |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0206 |



