TUOLNKAntenna pigtail cable
كيبل تمديد هوائي من IPEX MHF4 إلى RP-SMA أنثى بطول 30cm | IPEX MHF4 to RP-SMA Female Pigtail Antenna Cable, 0.81mm, 30cm
كيبل تمديد هوائي من IPEX MHF4 إلى RP-SMA أنثى بطول 30cm | IPEX MHF4 to RP-SMA Female Pigtail Antenna Cable, 0.81mm, 30cm — 3,613 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- IPEX MHF4 to RP-SMA female
- 30cm length, 0.81mm cable diameter
- 50Ω impedance
- Covers the 2.4GHz and 5GHz bands
- Not compatible with U.FL / IPEX-1 sockets
Ask about stock or request a better price
Price
3,613IQDIts price has held at 4,250 IQD for the last 11 days.
About this item
30cm pigtail cable from IPEX MHF4 to RP-SMA female, 0.81mm thick, for routing a WiFi card's antenna out of the device.
This is a thin pigtail cable, 0.81mm in diameter, ending on one side in an IPEX MHF4 connector that fits onto a wireless network card and on the other in an RP-SMA female connector that mounts on the enclosure wall so an external antenna can be attached. It is 30cm long with 50Ω impedance and is used mainly to bring the antenna of an M.2 WiFi card outside the device body.
Its main benefit is that the antenna comes out from inside a metal enclosure, which clearly improves signal according to the listing. The fine MHF4 end suits modern M.2 / NGFF WiFi cards, the RP-SMA female end accepts common external router antennas, and the thin cable passes easily through tight routes. It covers the 2.4GHz and 5GHz bands, and the RP-SMA end is secured to the enclosure wall with a nut.
Common uses: bringing out the antenna of a WiFi card in mini computers and hand-built routers, fitting an external antenna on an IoT device case or a metal control box, and replacing a damaged antenna cable in a laptop or wireless card.
Important warning before buying: the MHF4 connector is smaller than the traditional U.FL / IPEX-1 connector and the two are mechanically incompatible, so check the socket type on your card because pressing onto the wrong socket breaks it permanently. The box contains one antenna extension cable, 30cm long. The condition is new and the warranty is 1 month.
Suitable for
- Routing the antenna of an M.2 WiFi card out of a metal case
- Fitting an external antenna on an IoT device
- Replacing a damaged antenna cable in a laptop
Seller's description
كيبل pigtail رفيع بقطر 0.81mm ينتهي من جهة بموصل IPEX من نوع MHF4 يركّب على بطاقة الشبكة اللاسلكية، ومن الجهة الأخرى بموصل RP-SMA أنثى يُثبَّت على جدار العلبة ليُركَّب عليه الهوائي الخارجي. طوله 30cm وممانعته 50Ω، ويستخدم أساساً لإخراج هوائي بطاقات WiFi من نوع M.2 خارج جسم الجهاز.
أبرز المزايا
- يخرج الهوائي من داخل العلبة المعدنية فيرفع جودة الإشارة بوضوح
- طرف MHF4 دقيق يناسب بطاقات WiFi الحديثة من نوع M.2 / NGFF
- طرف RP-SMA أنثى يقبل الهوائيات الخارجية الشائعة للراوترات
- كيبل رفيع 0.81mm يمر بسهولة داخل المسارات الضيقة في العلب
- ممانعة 50Ω تحافظ على المطابقة عبر نطاق واسع من الترددات
الاستخدامات الشائعة
- إخراج هوائي بطاقة WiFi في الحاسبات المصغرة وأجهزة الراوتر المصنوعة يدوياً
- تركيب هوائي خارجي على علبة جهاز IoT أو صندوق تحكم معدني
- استبدال كيبل هوائي تالف في اللابتوب أو البطاقة اللاسلكية
ملاحظة: موصل MHF4 أصغر من موصل U.FL / IPEX-1 التقليدي وهما غير متوافقين ميكانيكياً، فتأكد من نوع المقبس على بطاقتك قبل الشراء لأن الضغط على المقبس الخاطئ يكسره نهائياً.
What's in the box
كيبل تمديد هوائي واحد بطول 30cm بموصلي MHF4 و RP-SMA أنثى
Specifications
| Brand | TUOLNK |
|---|---|
| Cable type | pigtail تمديد هوائي |
| First end | IPEX MHF4 (U.FL دقيق) |
| Second end | RP-SMA أنثى عكسية القطبية |
| Length | 30cm |
| Cable diameter | 0.81mm |
| Impedance | 50Ω |
| Frequency range | يغطي نطاقي 2.4GHz و5GHz |
| Compatibility | بطاقات WiFi من نوع M.2 / NGFF ذات مقبس MHF4 |
| طريقة التثبيت | يُثبَّت طرف RP-SMA على جدار العلبة بصامولة |
| قيد التوافق | غير متوافق مع مقابس U.FL / IPEX-1 الأكبر |
| Category | Networking, Telecom & RF Hardware |
| More categories | Antennas |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0234 |


