DC-DC buck converter

كارت خافض للفولتية DC-DC بتيار 12A من 5-40V إلى 1.2-36V | High Power DC-DC Step-Down Buck Converter 12A, 5-40V to 1.2-36V

⁨كارت خافض للفولتية DC-DC بتيار 12A من 5-40V إلى 1.2-36V | High Power DC-DC Step-Down Buck Converter 12A, 5-40V to 1.2-36V⁩ — ⁨12,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 5-40V DC input, adjustable 1.2-36V output
  • Up to 12A output current
  • Conversion efficiency of up to 95%
  • Short-circuit and thermal protection
  • New, with a 1 months warranty
12,500IQDIn stock
1

Ask about stock or request a better price

Price

12,500IQD

Its price has held at 12,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Non-isolated DC-DC step-down buck converter with a 5-40V input, an adjustable 1.2-36V output and up to 12A of output current, for high-load projects.

This is a DC-DC step-down module of the non-isolated buck type, built for high loads. It takes a DC input of 5-40V and steps it down to an adjustable output of 1.2-36V at up to 12A. It lowers the voltage by fast switching instead of turning the difference into heat the way linear regulators do.

The output is set with a trimmer on the board. The converter switches at 180KHz and reaches a conversion efficiency of up to 95%, which means less wasted heat than a linear regulator. A large heatsink sits on the power switches to keep performance steady at high current, and the input and output terminals are screw terminals, so wires connect without soldering.

For protection, the listing mentions short-circuit protection through current limiting at 12A, and a thermal protection that disconnects the load automatically when the temperature rises. The operating temperature range is -40°C to +85°C. It suits stepping 24V or 36V down to 12V in cars, trucks and boats, powering LED strips and lighting panels, feeding DC loads from solar-system batteries, or serving as an auxiliary supply on the test bench.

Before buying and installing, note that the input voltage must be at least 2V higher than the output. Set the output voltage with no load first and then connect the load, and do not run the unit near 12A without ventilation or a cooling fan. The listing describes it as new with a 1 months warranty, and the box holds one converter card. The listing does not state the board dimensions, so ask the shop through chat if size matters for your project.

Suitable for

  • Stepping 24V or 36V down to 12V in vehicles and boats
  • Powering LED strips and lighting panels
  • Feeding DC loads from solar-system batteries
  • Auxiliary supply on the test bench

Seller's description

وحدة خفض فولتية DC-DC غير معزولة مصممة للأحمال العالية، تقبل دخلاً من 5V إلى 40V وتعطي خرجاً قابلاً للضبط من 1.2V إلى 36V بتيار مستمر يصل إلى 12A. تعمل بتردد تبديل 180KHz وبكفاءة تحويل تصل إلى 95%، وتحمل مشتّتاً حرارياً كبيراً يثبّت الأداء عند التيارات العالية. تُستخدم بديلاً عن المنظمات الخطية حيث يكون الفقد الحراري مشكلة.

أبرز المزايا

  • خرج قابل للضبط من 1.2V حتى 36V عبر مقاومة متغيرة على اللوحة
  • تيار خرج أقصى 12A مع حماية من قصر الدائرة بتحديد التيار
  • حماية حرارية تفصل الحمل تلقائياً عند ارتفاع درجة الحرارة
  • كفاءة تحويل تصل إلى 95% تقلل الفقد والحرارة مقارنة بالمنظمات الخطية
  • تردد تبديل 180KHz يسمح بمرشحات أصغر واستجابة أسرع للحمل
  • مدى حرارة تشغيل واسع من -40°C إلى +85°C

الاستخدامات الشائعة

  • خفض 24V أو 36V إلى 12V في أنظمة السيارات والشاحنات والقوارب
  • تغذية شرائط LED ولوحات الإنارة بجهد ثابت وتيار عالٍ
  • تغذية أحمال DC من بطاريات الأنظمة الشمسية
  • مصدر تغذية مساعد على طاولة العمل والاختبار

ملاحظة: يجب أن تزيد فولتية الدخل عن الخرج بمقدار 2V على الأقل. اضبط جهد الخرج بلا حمل أولاً ثم وصّل الحمل، ولا تشغّل الوحدة قرب 12A دون تهوية أو مروحة تبريد.

What's in the box

كارت خافض للفولتية DC-DC بتيار 12A واحد

Specifications

Conversion typeخافض غير معزول (non-isolated buck)
Input voltage5–40V DC
Output voltage1.2–36V قابل للضبط
Max output current12A
Efficiencyحتى 95%
Switching frequency180KHz
Operating temperature-40°C إلى +85°C
حماية قصر الدائرةنعم، بتحديد التيار عند 12A
الحماية الحراريةفصل تلقائي للحمل عند ارتفاع الحرارة
طريقة الضبطمقاومة متغيرة (trimmer) على اللوحة
التبريدمشتّت حراري كبير على مفاتيح القدرة
أطراف التوصيلأطراف لولبية للدخل والخرج
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesInverters and converters
ConditionNew
Warranty1-month warranty
SKUNTK-0314

Questions about كارت خافض للفولتية DC-DC بتيار 12A من 5-40V إلى 1.2-36V | High Power DC-DC Step-Down Buck Converter 12A, 5-40V to 1.2-36V

It currently costs 12,500 IQD from Nanotik on SinaaStore (updated 16 November 2026).
The maximum output current is 12A according to the listing. Do not run it near that current without ventilation or a cooling fan.
Yes, the listing mentions stepping 24V or 36V down to 12V, provided the input is at least 2V above the output.
With the trimmer on the board. Set the output with no load first, then connect the load.
The listing does not specify the dimensions, so ask the shop through chat before buying.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.