Hi-LinkAC-DC power supply module

وحدة تغذية Hi-Link HLK-PM12 من 220V AC إلى 12V DC بقدرة 3W | Hi-Link HLK-PM12 AC-DC Power Supply Module, 220V AC to 12V DC 3W

⁨وحدة تغذية Hi-Link HLK-PM12 من 220V AC إلى 12V DC بقدرة 3W | Hi-Link HLK-PM12 AC-DC Power Supply Module, 220V AC to 12V DC 3W⁩ — ⁨5,313 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 220V AC input, regulated 12V DC output
  • 3W rating, about 250mA
  • Isolation between AC and DC sides
  • THT pins soldered onto the board
  • Short-circuit and overload protection
5,313IQD6,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

5,313IQD

Its price has held at 6,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Hi-Link HLK-PM12 miniature module converting 220V AC to 12V DC at 3W, soldered onto the board for smart switches and sensors.

The Hi-Link HLK-PM12 is a miniature epoxy-encapsulated power module from the HLK-PM family. It converts 220V AC mains directly into a regulated 12V DC output at 3W, about 250mA of current. It is soldered onto the board like any other component, and its small size suits building mains power into smart switches, sensors and control boards that cannot fit a conventional adapter.

The module is an isolated switching supply, with isolation between the AC mains side and the DC output side inside a solid epoxy shell, plus short-circuit and overload protection with automatic recovery. Cooling is natural through the casing, with no heatsink. It mounts with THT pins soldered straight onto the board with no extra wiring, and has AC input pins and DC output pins.

Uses named in the listing are powering smart switches and IoT projects that run on mains power, driving 12V relays inside control and alarm panels, meter and sensor circuits inside electrical boxes, and replacing a faulty adapter in a small device with limited space. The output suits relay circuits and microcontrollers.

Important notes before buying: the input side carries full mains voltage, so respect the isolation clearances on the board. Do not load the module beyond 250mA. If your controller needs a lower voltage, use a 3.3V or 5V regulator after it. The box holds one HLK-PM12 module, the condition is new, and the warranty is 1 months according to the listing.

Suitable for

  • Powering smart switches and IoT projects
  • Driving 12V relays inside control panels
  • Feeding sensors inside electrical boxes

Seller's description

وحدة تغذية مصغّرة مغلّفة بالإيبوكسي من عائلة HLK-PM تحوّل فولتية الشبكة 220V AC مباشرة إلى 12V DC بقدرة 3W، وتُلحَم على اللوحة مثل أي مكوّن آخر. حجمها الصغير جداً يجعلها الحل المفضّل لدمج تغذية الشبكة داخل مفاتيح ذكية وحساسات ولوحات تحكم لا تتّسع لمحوّل تقليدي، مع خرج معزول ومنظّم يغذّي دوائر الريلاي والمتحكّمات.

أبرز المزايا

  • خرج 12V DC منظّم بقدرة 3W أي تيار نحو 250mA
  • دخل واسع يقبل فولتية الشبكة المتناوبة بما فيها 220V
  • عزل بين جهة الشبكة وجهة الخرج ضمن غلاف إيبوكسي مصمت
  • حجم صغير جداً يوفّر مساحة كبيرة على اللوحة
  • أطراف THT تُلحَم مباشرة على البورد دون أسلاك إضافية
  • حماية داخلية من التماس والحمل الزائد مع استرجاع تلقائي

الاستخدامات الشائعة

  • تغذية مفاتيح ذكية ومشاريع IoT تعمل على تيار الشبكة
  • تشغيل ريلايات 12V داخل لوحات التحكم والإنذار
  • دوائر عدّادات وحساسات مثبّتة داخل علب الكهرباء
  • استبدال محوّل تالف في جهاز صغير محدود المساحة

ملاحظة: جهة الدخل تحمل فولتية الشبكة كاملة، لذا احترم مسافات العزل على اللوحة، واستخدم منظّم 3.3V أو 5V بعدها إذا كان المتحكّم يحتاج فولتية أقل، ولا تحمّلها فوق 250mA.

What's in the box

وحدة تغذية HLK-PM12 واحدة.

Specifications

BrandHi-Link
Output voltage12V DC منظّمة
Power3W
Maximum output currentنحو 250mA
Input voltageتيار متناوب AC يشمل 220V
Mountingأطراف THT تُلحَم على اللوحة
Protectionحماية من التماس والحمل الزائد مع استرجاع تلقائي
نوع الوحدةمزود مفتاحي معزول مغلّف بالإيبوكسي
العزلعزل بين جهة AC وجهة الخرج DC
عدد الأطرافطرفا دخل AC وطرفا خرج DC
التبريدطبيعي عبر الغلاف دون مشتّت حراري
الميزة الأبرزحجم مصغّر يناسب العلب الضيقة
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesPower supplies
ConditionNew
Warranty1-month warranty
SKUNTK-0237

Questions about وحدة تغذية Hi-Link HLK-PM12 من 220V AC إلى 12V DC بقدرة 3W | Hi-Link HLK-PM12 AC-DC Power Supply Module, 220V AC to 12V DC 3W

It currently costs 5,313 IQD (was 6,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
3W with an output current of about 250mA at 12V DC, and the listing warns against loading it above 250mA.
It is soldered straight onto the board with THT pins and no extra wiring, according to the listing.
Its output is 12V, and the listing advises a 3.3V or 5V regulator after it if the controller needs a lower voltage.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.