Bluetooth serial module
وحدة بلوتوث تسلسلية موديل HC-06 | HC-06 Bluetooth Serial Module (Slave)
وحدة بلوتوث تسلسلية موديل HC-06 | HC-06 Bluetooth Serial Module (Slave) — 6,525 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Slave mode only
- UART serial interface
- Configured with AT commands
- Bluetooth 2.0 classic
- Works with Android phones and computers
- New, with a 1-month warranty
Ask about stock or request a better price
Price
6,525IQDIts price has held at 7,250 IQD for the last 11 days.
About this item
HC-06 Bluetooth serial module that works in slave mode only, linking a microcontroller to a phone or computer as a wireless serial port.
The HC-06 is a Bluetooth serial module that works in slave mode only, creating a wireless serial port between a microcontroller and a phone or computer. According to the listing the idea is simple: the microcontroller program treats it as an ordinary serial port with no need to know the Bluetooth protocol, so adding phone control takes minutes.
It connects to the microcontroller over a UART serial interface and is configured with AT commands. The stated operating voltage is 3.3 – 5 volts depending on the unit, and the Bluetooth version is 2.0 classic. The listed compatible devices are Android phones and computers. Common uses are controlling robots from a phone, sending sensor readings wirelessly, home automation, and teaching and IoT workshops.
The key limitation is that it works as a slave only and cannot initiate a connection to another device. If you need modules that connect to each other, the listing points to the HC-05, which can act as a master. Check the actual operating voltage of your unit before wiring, since the listing says it depends on the unit. It is new with a 1-month warranty.
Suitable for
- Controlling robots from a phone
- Sending sensor readings wirelessly
- Home automation and teaching projects
Seller's description
وحدة بلوتوث تسلسلية موديل HC-06 تعمل في وضع التابع فقط، تنشئ منفذاً تسلسلياً لاسلكياً بين الميكروكونترولر والهاتف أو الحاسوب. الفكرة العملية بسيطة وقوية: البرنامج في الميكروكونترولر يتعامل معها كأنها منفذ تسلسلي عادي بلا أي تعقيد في بروتوكول البلوتوث، فتصبح إضافة التحكم من الهاتف مسألة دقائق.
أبرز المزايا
- تعمل كمنفذ تسلسلي لاسلكي شفاف
- لا تحتاج معرفة ببروتوكول البلوتوث
- إعداد بسيط بأوامر AT
- تعمل مع الهواتف والحواسيب مباشرة
- سعر منخفض لوظيفة اتصال لاسلكي كاملة
الاستخدامات الشائعة
- التحكم بالروبوتات من الهاتف
- إرسال قراءات الحساسات لاسلكياً
- مشاريع الأتمتة المنزلية
- التعليم وورش إنترنت الأشياء
ملاحظة: HC-06 تعمل كتابع فقط ولا يمكنها بدء الاتصال بجهاز آخر؛ إن كنت تحتاج وحدتين تتصلان ببعضهما فأنت بحاجة إلى HC-05 القادرة على العمل كسيّد.
What's in the box
وحدة بلوتوث HC-06 واحدة
Specifications
| Model | HC-06 |
|---|---|
| Mode | تابع (Slave) فقط |
| Interface | تسلسلية UART |
| Operating voltage | 3.3 – 5 فولت حسب الوحدة |
| Bluetooth version | 2.0 كلاسيكي |
| النوع | وحدة بلوتوث تسلسلية |
| الإعداد | أوامر AT |
| الأجهزة المتوافقة | هواتف أندرويد وحواسيب |
| القيد | لا يمكنها بدء الاتصال |
| البديل | HC-05 للعمل كسيّد |
| Category | Networking, Telecom & RF Hardware |
| More categories | RF modules & radio transmitters |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0690 |




