PCB terminal block

ترمينال HB-9500 بأربعة أطراف مسافة 9.5mm مع غطاء واقٍ للوحة الإلكترونية | HB-9500 4-Pin 9.5mm Pitch PCB Terminal Block with Cover

⁨ترمينال HB-9500 بأربعة أطراف مسافة 9.5mm مع غطاء واقٍ للوحة الإلكترونية | HB-9500 4-Pin 9.5mm Pitch PCB Terminal Block with Cover⁩ — ⁨2,275 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 4 terminals at 9.5mm pitch
  • Top cover prevents accidental contact
  • 300V rating, up to about 30A
  • Accepts wires up to about 4 - 6mm²
  • Can be stacked side by side
2,275IQD3,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

2,275IQD

Its price has held at 3,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

HB-9500 power terminal block with 4 terminals at 9.5mm pitch and a plastic top cover, for soldering onto a PCB in high-voltage and high-current circuits.

The HB-9500 power terminal block comes with 4 terminals (4P) and a 9.5mm pitch between terminals, plus a plastic top cover that closes over the screws after the wires are tightened, preventing accidental contact with live parts. The large pitch and thick terminals suit high voltage and large currents in power supplies and control panels.

The stated electrical rating is 300V and a high current typical for this size, up to about 30A. It accepts thick wires with a cross-section of up to about 4 - 6mm², tightened with a top screw and a compression nut. The body is engineering plastic that resists soldering heat, the conductor is plated copper with a thick cross-section, and plastic dividers between terminals reduce the risk of shorts.

It mounts by soldering onto the PCB in a Through-Hole manner, and can be stacked side by side with other pieces to build the number of terminals you need. Before buying, make sure your board holes suit a 9.5mm pitch, which is much larger than the common 5.08mm terminal blocks.

Listed uses include 220V inputs and outputs in power supplies and control panels, relay boards and motor feeds, power distribution boards inside devices and electrical boxes, and solar systems and battery panels.

The cover does not replace basic insulation in 220V circuits, so keep enough distance between copper tracks under the terminal, and tighten the screws well because a loose connection causes sparks and heat. The item is new with a 1 months warranty, and the box holds one HB-9500 terminal block with 4 terminals and the cover.

Suitable for

  • 220V inputs and outputs in power supplies and control panels
  • Relay boards and motor feeds
  • Solar systems and battery panels

Seller's description

ترمينال قدرة بأربعة أطراف من طراز HB-9500 بمسافة 9.5mm بين الأطراف، يأتي بغطاء بلاستيكي علوي يغلق على البراغي بعد ربط الأسلاك فيمنع اللمس العرضي للأجزاء الحية. المسافة الكبيرة والأطراف السميكة تجعله مناسباً لخطوط الفولتية العالية والتيارات الكبيرة في مزودات الطاقة ولوحات التحكم، مع إمكانية رصّ عدة قطع لتكوين عدد الأطراف المطلوب.

أبرز المزايا

  • غطاء علوي يحمي من اللمس العرضي لأطراف 220V
  • مسافة 9.5mm تمنح مسافة عزل وزحف مناسبة للفولتية العالية
  • أطراف سميكة تتحمل تياراً أعلى بكثير من ترمينالات 5.08mm
  • يقبل أسلاكاً غليظة تصل إلى نحو 4 – 6mm²
  • قابل للرصّ جانبياً لتكوين أي عدد من الأطراف
  • حواجز عزل بين الأطراف تقلل خطر التماس بين الخطوط

الاستخدامات الشائعة

  • مداخل ومخارج 220V في مزودات الطاقة ولوحات التحكم
  • لوحات الريليهات ومغذيات المحركات
  • لوحات توزيع التغذية داخل الأجهزة والعلب الكهربائية
  • أنظمة الطاقة الشمسية ولوحات البطاريات

ملاحظة: الغطاء لا يغني عن العزل الأساسي في دوائر 220V؛ حافظ على مسافة كافية بين مسارات النحاس أسفل الترمينال، وتأكد من شدّ البراغي جيداً لأن الربط الرخو يولّد شرارة وحرارة.

What's in the box

ترمينال HB-9500 واحد بأربعة أطراف مع الغطاء

Specifications

ModelHB-9500
Terminals4P
Pitch9.5mm
Electrical rating300V وتيار مرتفع نموذجي لهذا المقاس (حتى نحو 30A)
Accepted wire sizeحتى نحو 4 – 6mm²
MountingThrough-Hole باللحام على PCB
الغطاءغطاء بلاستيكي علوي يغلق على البراغي
طريقة الربطبرغي علوي مع صامولة ضغط
العزل بين الأطرافحواجز بلاستيكية فاصلة
مادة الجسمبلاستيك هندسي مقاوم لحرارة اللحام
مادة الموصلنحاس مطلي بمقطع سميك
التوسعةقابل للرصّ جانبياً مع قطع أخرى
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0236

Questions about ترمينال HB-9500 بأربعة أطراف مسافة 9.5mm مع غطاء واقٍ للوحة الإلكترونية | HB-9500 4-Pin 9.5mm Pitch PCB Terminal Block with Cover

It currently costs 2,275 IQD (was 3,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
9.5mm, larger than 5.08mm terminal blocks.
The listing states 300V and a current of up to about 30A.
Yes, the box holds one HB-9500 terminal block with 4 terminals and the cover.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.