GenericInline fuse holder

حامل فيوز نوع برغي 22-20 AWG مع فيوز 5x20 ملم بقوة 10 أمبير 220 فولت | Inline Fuse Holder

⁨حامل فيوز نوع برغي 22-20 AWG مع فيوز 5x20 ملم بقوة 10 أمبير 220 فولت | Inline Fuse Holder⁩ — ⁨2,100 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Screw-type fuse holder
  • Fits 5x20mm fuses
  • Rated 10A at 220V
  • Wire gauge 22-20 AWG
  • New, with a 1-month warranty
2,100IQD3,000IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

2,100IQD

Its price has held at 3,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

Screw-type inline fuse holder for 5x20mm fuses, rated 10A and 220V for 22-20 AWG wire, protecting circuits from overcurrent.

This is a screw-type fuse holder made for 5x20mm fuses. It sits on a supply line to protect the electrical circuit from overcurrent, and the listing describes it for light household and industrial uses.

The stated rating is 10A at 220V, and it suits wire of 22-20 AWG. That makes it appropriate for small to medium lines rather than thick cables, so check your wire gauge before buying. Also match the fuse value you fit to the load of the device, because a wrong choice either fails to protect the circuit or blows the fuse repeatedly.

When installing, cut power to the circuit completely first and tighten the wires firmly inside the holder, since a weak connection can cause sparks or heat. Place the holder somewhere easy to reach so you can swap the fuse quickly when needed.

The product is new according to the listing, the box holds one holder, and it carries a 1-month warranty against manufacturing operating defects, excluding misuse.

Suitable for

  • Protecting a circuit from overcurrent
  • Light household and industrial applications
  • Adding a fuse to a device supply line

Seller's description

حامل فيوز نوع برغي 5x20 ملم

يعتبر حامل الفيوز نوع برغي Screw Type 22-20 AWG Wire 5 x 20mm Inline Fuse Holder 10A220V 5X20 عنصراً أساسياً في حماية الدوائر الكهربائية من التيارات الزائدة. تم تصميم هذا الحامل ليتناسب مع الفيوزات القياسية بحجم 5x20 ملم، مما يجعله خياراً ممتازاً لمجموعة واسعة من التطبيقات المنزلية والصناعية الخفيفة التي تتطلب حماية موثوقة.

يتميز هذا الحامل بقدرة تحمل تصل إلى 10 أمبير وجهد تشغيل يصل إلى 220 فولت، وهو مصمم ليتوافق مع أسلاك بقياس 22-20 AWG. عند اختيار هذا المنتج، تأكد من أن سعة الفيوز المستخدم تتناسب مع الحمل الكهربائي للجهاز المراد حمايته، حيث أن الاختيار الخاطئ قد يؤدي إلى عدم توفير الحماية المطلوبة أو احتراق الفيوز بشكل متكرر.

نصائح التركيب والسلامة

عند تركيب حامل الفيوز، تأكد من قطع التيار الكهربائي تماماً عن الدائرة قبل البدء بأي أعمال ربط. يجب التأكد من إحكام ربط الأسلاك داخل الحامل لضمان توصيل كهربائي جيد ومنع حدوث شرارة أو ارتفاع في درجة الحرارة نتيجة التوصيل الضعيف. يُنصح بوضع الحامل في مكان يسهل الوصول إليه لاستبدال الفيوز عند الحاجة.

  • نوع التثبيت: برغي
  • حجم الفيوز المتوافق: 5x20 ملم
  • التيار الأقصى: 10 أمبير
  • الجهد الأقصى: 220 فولت
  • قياس الأسلاك: 22-20 AWG

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من Screw Type 22-20 AWG Wire 5 x 20mm Inline Fuse Holder 10A220V 5X20.

Specifications

BrandGeneric
Fixing typeبرغي
Compatible fuse size5x20 ملم
Maximum current10 أمبير
Maximum voltage220 فولت
Wire gauge22-20 AWG
الموديل أو اسم القطعةScrew Type 22-20 AWG Wire 5 x 20mm Inline Fuse Holder 10A220V 5X20
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-XF316AE03912

Questions about حامل فيوز نوع برغي 22-20 AWG مع فيوز 5x20 ملم بقوة 10 أمبير 220 فولت | Inline Fuse Holder

It currently costs 2,100 IQD (was 3,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
A 5x20mm fuse, according to the listing.
10A and 220V, according to the listing.
Wire of 22-20 AWG, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.