GenericAA battery holder
حامل بطارية AA واحد مع سلك | Battery Holder
حامل بطارية AA واحد مع سلك | Battery Holder — 3,000 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Holds one AA battery
- Comes with ready-to-connect wires
- Model number D11 050044
- Suits 1.5 volt projects
- New, with a 1 months warranty
Ask about stock or request a better price
Price
3,000IQDIts price has held at 3,000 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
A holder for one AA battery with ready wires, model number D11 050044, for powering small electronics projects at 1.5 volts.
A holder for a single AA battery with a wire lead, providing an independent power source for small electronics projects and making battery installation and replacement simple. Its model number is D11 050044, and it suits robot models, sensors and educational projects based on 1.5 volts. The listing does not mention a battery among the contents.
It comes with ready-to-connect wires. When connecting, make sure the polarity matches your circuit, mount the holder securely inside the project housing so the battery does not move and the wires do not break from vibration, and do not subject the wires to direct pulling at the connection points.
For circuit safety avoid short circuits at the wire ends and use insulating tape or heat-shrink tubing to cover the connection points. Remove the battery if the device will not be used for a long time, to avoid chemical leakage that could harm the holder or surrounding components. The listing does not state the wire length or whether there is a switch, so ask the shop. The item is new with a 1 months warranty.
Suitable for
- Powering small robot models
- Supplying sensors
- Educational electronics projects
- Small portable projects
Seller's description
حامل بطارية AA واحد مع سلك
يعتبر حامل بطارية AA الواحد المزود بسلك أداة أساسية لتشغيل المشاريع الإلكترونية الصغيرة التي تتطلب مصدراً مستقلاً للطاقة. يتميز هذا الحامل بتصميمه البسيط الذي يسهل عملية تركيب البطارية واستبدالها، مما يجعله خياراً مثالياً لنماذج الروبوتات، أجهزة الاستشعار، والمشاريع التعليمية التي تعتمد على جهد 1.5 فولت.
عند استخدام هذا الحامل، تأكد من توصيل الأسلاك بشكل صحيح وفقاً لقطبية الدائرة الكهربائية الخاصة بك. يُفضل دائماً تثبيت الحامل في مكان آمن داخل هيكل المشروع لمنع تحرك البطارية أو انقطاع الأسلاك نتيجة الاهتزازات. تأكد من أن الأسلاك غير معرضة للشد المباشر عند نقاط التوصيل لضمان استمرارية تدفق التيار.
مميزات حامل البطارية
- السعة: بطارية AA واحدة.
- التجهيزات: مزود بأسلاك جاهزة للتوصيل.
- التصميم: هيكل متين وسهل الاستخدام.
- رقم الموديل: D11 050044.
- الاستخدام: مشاريع إلكترونية صغيرة ومحمولة.
للحفاظ على سلامة الدائرة، تجنب حدوث قصر في الدائرة الكهربائية (Short Circuit) عند أطراف الأسلاك. يُنصح باستخدام شريط عازل أو أنابيب انكماش حراري لتغطية نقاط التوصيل بعد ربطها بالدائرة الرئيسية. تأكد من إزالة البطارية في حال عدم استخدام الجهاز لفترات طويلة لتجنب أي تسريب كيميائي قد يضر بالحامل أو المكونات الإلكترونية المحيطة.
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 1x AA Battery Holder Case With Wire.
Specifications
| Brand | Generic |
|---|---|
| Capacity | بطارية AA واحدة |
| Fitted with | مزود بأسلاك جاهزة للتوصيل |
| Model number | D11 050044 |
| Voltage | 1.5 فولت |
| الموديل أو اسم القطعة | 1x AA Battery Holder Case With Wire |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-X3310A3EEF49 |




