FTDIUSB to TTL adapter module

وحدة تحويل USB إلى TTL Serial بشريحة FT232RL بفولتية 5V/3.3V | FT232RL USB to TTL Serial Adapter Module, 5V / 3.3V

⁨وحدة تحويل USB إلى TTL Serial بشريحة FT232RL بفولتية 5V/3.3V | FT232RL USB to TTL Serial Adapter Module, 5V / 3.3V⁩ — ⁨4,600 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • FTDI FT232RL chip
  • 5V or 3.3V logic via jumper
  • Baud rate up to 3Mbps
  • Shows up as a virtual COM port
  • TX and RX LED indicators
4,600IQD5,750IQDخصم 20%In stock
1

Ask about stock or request a better price

Price

4,600IQD

Its price has held at 5,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

USB to TTL serial converter module with an FTDI FT232RL chip, 5V or 3.3V logic level via jumper, and baud rates up to 3Mbps.

A converter module from USB to a TTL serial port built around the FTDI FT232RL chip. It appears on the computer as a virtual COM port and lets you program microcontrollers, watch Serial Monitor output, and talk to GSM and GPS modules, network boards and routers. The interface is USB 2.0 Full Speed to UART TTL.

The 5V or 3.3V logic level is chosen with a jumper to protect sensitive boards, and the baud rate reaches 3Mbps with VCP driver support on Windows, Linux and macOS. The broken-out pins are VCC, GND, TXD, RXD, RTS, CTS and DTR, and the DTR pin supports automatic reset when uploading a program.

The module provides power output of 3.3V from an internal regulator and 5V from the USB port to power the target board during programming, and TX and RX LED indicators make it easier to diagnose a dropped connection.

Listed uses include programming Arduino Pro Mini, ESP8266 and ESP32 boards and microcontrollers with a serial bootloader, connecting to SIM800 and GPS modules and reading their data, and reaching the console port of routers and network devices for maintenance work.

Set the jumper to 3.3V before connecting an ESP8266, an ESP32 or any 3.3V board, because feeding the RX pins 5V can permanently damage the chip input. The listing says protection applies only to the selected logic levels.

The item is new per the listing with a 1 months warranty, and the box holds one USB to TTL module with an FT232RL chip. The listing does not say whether a USB cable or jumper wires are in the box, so ask the shop through chat.

Suitable for

  • Programming Arduino Pro Mini, ESP8266 and ESP32
  • Connecting to SIM800 and GPS modules
  • Reaching the console of routers and network devices for maintenance

Seller's description

وحدة تحويل من USB إلى منفذ تسلسلي TTL مبنية على شريحة FT232RL من FTDI، وهي الشريحة الأكثر استقراراً في هذا المجال لجودة مشغلاتها على Windows و Linux و macOS. تظهر في الحاسبة كمنفذ COM افتراضي، وتتيح برمجة المتحكمات ومراقبة خرج Serial Monitor والاتصال بوحدات GSM و GPS ولوحات الشبكة والراوترات.

أبرز المزايا

  • جمبر لاختيار فولتية المنطق بين 5V و3.3V لحماية اللوحات الحساسة
  • معدلات بود عالية تصل إلى 3Mbps مع دعم كامل لمشغلات VCP
  • يخرج طرفي DTR و RTS لدعم إعادة التشغيل التلقائي عند رفع البرنامج
  • مؤشرات LED للإرسال والاستقبال تسهّل تشخيص انقطاع الاتصال
  • يوفر خرج تغذية 3.3V و5V لتشغيل اللوحة المستهدفة أثناء البرمجة

الاستخدامات الشائعة

  • برمجة Arduino Pro Mini و ESP8266 و ESP32 والمتحكمات ذات bootloader تسلسلي
  • الاتصال بوحدات SIM800 و GPS وقراءة بياناتها على الحاسبة
  • الدخول إلى منفذ الكونسول في الراوترات وأجهزة الشبكة لأعمال الصيانة

ملاحظة: اضبط الجمبر على 3.3V قبل توصيل ESP8266 أو ESP32 أو أي لوحة تعمل بـ 3.3V، فتغذية أطراف RX بفولتية 5V قد تتلف مدخل الشريحة بشكل دائم.

What's in the box

وحدة تحويل USB إلى TTL بشريحة FT232RL واحدة

Specifications

BrandFTDI
ChipFTDI FT232RL
InterfaceUSB 2.0 Full Speed إلى UART TTL
Logic voltage5V أو 3.3V عبر جمبر
Maximum baud rateحتى 3Mbps
Broken-out pinsVCC، GND، TXD، RXD، RTS، CTS، DTR
Operating systemsWindows و Linux و macOS بمشغلات VCP
خرج التغذية3.3V من منظم داخلي و5V من منفذ USB
إعادة التشغيل التلقائيمدعومة عبر طرف DTR
المؤشراتLED للإرسال TX و LED للاستقبال RX
الحمايةأطراف متوافقة مع مستويات المنطق المختارة فقط
الاستخدامبرمجة المتحكمات والاتصال التسلسلي والكونسول
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0383

Questions about وحدة تحويل USB إلى TTL Serial بشريحة FT232RL بفولتية 5V/3.3V | FT232RL USB to TTL Serial Adapter Module, 5V / 3.3V

It currently costs 4,600 IQD (was 5,750 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
The FTDI FT232RL chip.
Yes, the listing mentions programming ESP32 and ESP8266, but set the jumper to 3.3V before connecting.
Windows, Linux and macOS with VCP drivers, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.