GenericUSB to Serial TTL module
FT232RL محول USB إلى Serial TTL يدعم 1.8V 3.3V 5V | Level Converter Module
FT232RL محول USB إلى Serial TTL يدعم 1.8V 3.3V 5V | Level Converter Module — 11,900 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- FT232RL chip from FTDI
- USB to Serial TTL conversion
- Supports 5V, 3.3V and 1.8V levels
- Usable with Arduino, ESP8266 and STM32
- New, with a 1-month warranty
Ask about stock or request a better price
Price
11,900IQDIts price has held at 14,000 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
FT232RL USB to Serial TTL module supporting 5V, 3.3V and 1.8V levels, for connecting microcontrollers to a computer USB port.
The FT232RL USB to Serial TTL module connects devices that use TTL logic, such as microcontrollers, to a computer USB port. The listing describes it as a bridge that lets the computer communicate with electronic components that use serial communication, and it is built around the FT232RL chip from FTDI.
Its core job is converting USB signals into serial signals at TTL voltage levels and back. The key feature per the listing is support for 5V, 3.3V and 1.8V levels, normally with a jumper or switch to select the voltage that suits the target device, which makes it usable with microcontrollers such as Arduino, ESP8266 and STM32.
Before use, select the voltage level that matches your device before connecting, because applying a higher level than the target expects can damage the microcontroller, and check the wiring diagram and pin order. The listing does not state the connector shape, dimensions or included cables, and the box holds 1 piece of the same model.
It is listed as new with a 1-month warranty against manufacturing operating defects, excluding misuse, and it is aimed at specialists and hobbyists who know their circuit requirements.
Suitable for
- Programming microcontrollers over USB
- Debugging serial communication
- Electronics projects and repair work
Seller's description
FT232RL محول USB إلى Serial TTL يدعم 1.8V 3.3V 5V | Level Converter Module
يُعد FT232RL USB to Serial TTL Board Support 5V 3.3V 1.8V Level Converter Module خياراً عملياً لمن يبحث عن قطعة إلكترونية محددة للاستخدام في أعمال الصيانة أو التجميع أو تنفيذ المشاريع الإلكترونية. جرى إبقاء رقم الموديل والبيانات الأساسية كما هي لتسهيل المقارنة والبحث، لذلك يُنصح بمراجعة الاسم والصور والمقاسات ونوع التوصيل بعناية والتأكد من توافقها مع التطبيق المطلوب قبل الطلب.
بحسب بيانات المنتج، FT232RL USB to Serial TTL Board Support 5V 3.3V 1.8V Level Converter Module تُعد وحدة المحول FT232RL USB to Serial TTL أداة إلكترونية شائعة وفعالة للغاية تستخدم لربط الأجهزة التي تعمل بمنطق TTL (مثل المتحكمات الدقيقة) بمنفذ USB الخاص بالكمبيوتر. هي بمثابة "جسر" يتيح للكمبيوتر التواصل مع المكونات الإلكترونية التي تستخدم الاتصال التسلسلي (Serial Communication). الميزات والوظائف الرئيسية تتميز هذه الوحدة بالمرونة العالية والاعتمادية بفضل الشريحة الأصلية FT232RL من شركة FTDI: تحويل USB إلى TTL: الوظيفة الأساسية هي تحويل إشارات USB الرقمية المعقدة إلى إشارات تسلسلية بسيطة بمستويات جهد TTL، والعكس صحيح. دعم مستويات جهد متعددة (5V / 3.3V / 1.8V): هذه هي الميزة الأهم في هذه الوحدة. تحتوي عادةً على وصلة عبور (Jumper) أو مفتاح يمكن المستخدم من تحديد مستوى الجهد المناسب للجهاز المستهدف. هذا يجعلها متوافقة مع مجموعة واسعة جداً من المتحكمات الدقيقة (مثل الأردوينو، ESP8266، STM32) دون الحاجة إلى محولا.
للحصول على نتيجة مستقرة، افصل التغذية الكهربائية قبل التركيب واتبع مخطط الجهاز أو تعليمات المصنع عند توفرها. راعِ اتجاه التوصيل والقطبية والجهد والتيار والقدرة الحرارية بحسب نوع القطعة، ولا تعتمد على الشكل الخارجي وحده عند الاستبدال. إذا كان المنتج سيُستخدم كبديل لقطعة قديمة، فقارن رقم الجزء وترتيب الأطراف والأبعاد ونقاط التثبيت أولاً.
معلومات تساعدك على الاختيار
- اسم القطعة: FT232RL USB to Serial TTL Board Support 5V 3.3V 1.8V Level Converter Module
- رموز البحث والموديل: FT232RL، USB، Serial، TTL، Board
- التصنيف: New products، USB-RS & RS-USB Converter
- الخيارات المتاحة: كما تظهر في صفحة المنتج
- قبل الشراء: طابق المواصفات والصور مع الجهاز أو الدائرة المستهدفة.
المنتج مناسب للمختصين والهواة الذين يعرفون متطلبات دائرتهم أو جهازهم. احتفظ ببيانات الموديل أثناء الطلب، وعند الشك أرسل لنا صورة القطعة القديمة أو مخطط التوصيل حتى يمكن تدقيق التوافق بشكل أفضل. السعر والكمية والخيارات النهائية تظهر في صفحة المنتج وقت الطلب.
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من FT232RL USB to Serial TTL Board Support 5V 3.3V 1.8V Level Converter Module.
Specifications
| Brand | Generic |
|---|---|
| Chip | FT232RL |
| Voltage levels | 1.8V 3.3V 5V |
| Function | USB إلى Serial TTL |
| Compatibility | الأردوينو، ESP8266، STM32 |
| الموديل أو اسم القطعة | FT232RL USB to Serial TTL Board Support 5V 3.3V 1.8V Level Converter Module |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Inverters and converters |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XD377E019929 |




