Temperature probe

متحسس حرارة رقمي DS18B20 بغلاف ستانلس مقاوم للماء وكيبل بطول 2m | DS18B20 Waterproof Stainless Steel Temperature Probe with 2m Cable

⁨متحسس حرارة رقمي DS18B20 بغلاف ستانلس مقاوم للماء وكيبل بطول 2m | DS18B20 Waterproof Stainless Steel Temperature Probe with 2m Cable⁩ — ⁨4,463 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Digital DS18B20 chip with 1-Wire interface
  • Measuring range -55°C to +125°C
  • Leak-proof stainless steel casing
  • 2m cable with three wires
  • New, with a 1 months warranty
4,463IQD5,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,463IQD

Its price has held at 5,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DS18B20 digital temperature probe with a waterproof stainless steel probe and 2m cable, measuring -55°C to +125°C over a 1-Wire interface.

This is a digital temperature probe with a DS18B20 chip placed inside a leak-proof stainless steel probe, attached to a 2m cable with three wires (VCC, GND and DATA). It gives its reading digitally over a 1-Wire interface on a single data wire, so it needs no analog measurement or calibration, and the casing allows immersion in water and liquids.

The measuring range is -55°C to +125°C with ±0.5°C accuracy within -10°C to +85°C, and the conversion resolution is adjustable from 9 to 12 bit depending on the speed you need. Operating voltage is 3.0V to 5.5V, and it supports normal power or Parasitic Power. Each unit has a unique 64-bit ROM ID that lets you connect several probes on the same wire.

A 4.7kΩ pull-up resistor must be placed between DATA and VCC, and check the wire order before connecting because reversed power heats and ruins the chip within seconds. It suits measuring the temperature of tanks, heaters and water pipes, incubators and aquaculture, battery packs and control boxes, and Arduino, ESP32 and data-logging projects. The 2m cable is long enough to reach distant tanks and pipes.

The product is new with a 1 months warranty, and the box holds one DS18B20 probe with a stainless steel casing and a 2m cable.

Suitable for

  • Measuring tank, heater and water pipe temperature
  • Incubators, aquaculture and agricultural control
  • Monitoring battery pack and control box temperature
  • Arduino, ESP32 and data-logging projects

Seller's description

متحسس حرارة رقمي يعتمد شريحة DS18B20 موضوعة داخل مجس من الستانلس ستيل مانع لتسرب الماء، ومربوط بكيبل بطول 2 متر بثلاثة أسلاك. يعطي القراءة رقمياً عبر واجهة 1-Wire على سلك بيانات واحد، فلا يحتاج إلى مقياس تناظري أو معايرة. لكل قطعة معرّف فريد 64-bit يسمح بربط عدة متحسسات على السلك نفسه.

أبرز المزايا

  • مدى قياس واسع من -55°C إلى +125°C بدقة ±0.5°C ضمن المدى الشائع
  • خرج رقمي مباشر عبر 1-Wire يلغي الحاجة إلى دوائر تكييف إشارة
  • غلاف ستانلس مانع للتسرب يسمح بالغمر في الماء والسوائل
  • معرّف 64-bit فريد يتيح عدة متحسسات على سلك بيانات واحد
  • دقة تحويل قابلة للضبط من 9 إلى 12 bit حسب السرعة المطلوبة
  • كيبل 2 متر يكفي للوصول إلى الخزانات والأنابيب البعيدة

الاستخدامات الشائعة

  • قياس حرارة الخزانات والسخانات وأنابيب الماء
  • حاضنات ومزارع مائية وأنظمة تحكم زراعي
  • مراقبة حرارة حزم البطاريات وصناديق التحكم
  • مشاريع Arduino وESP32 وأنظمة تسجيل البيانات

ملاحظة: يلزم وضع مقاومة سحب 4.7kΩ بين سلك البيانات وسلك التغذية، وانتبه إلى ترتيب الأسلاك قبل التوصيل لأن عكس التغذية يسخّن الشريحة ويتلفها خلال ثوانٍ.

What's in the box

متحسس DS18B20 واحد بغلاف ستانلس وكيبل بطول 2 متر

Specifications

ChipDS18B20 رقمية
Interface1-Wire على سلك بيانات واحد
Measuring range-55°C إلى +125°C
Accuracy±0.5°C ضمن -10°C إلى +85°C
Conversion resolution9 إلى 12 bit قابلة للضبط
Operating voltage3.0V إلى 5.5V
Probe casingستانلس ستيل مانع لتسرب الماء
Cable length2 متر
Wires3 أسلاك (VCC، GND، DATA)
المعرّف الفريد64-bit ROM يسمح بعدة متحسسات على نفس السلك
المقاومة المطلوبةمقاومة سحب 4.7kΩ بين DATA وVCC
نمط التغذيةتغذية عادية أو Parasitic Power
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0412

Questions about متحسس حرارة رقمي DS18B20 بغلاف ستانلس مقاوم للماء وكيبل بطول 2m | DS18B20 Waterproof Stainless Steel Temperature Probe with 2m Cable

It currently costs 4,463 IQD (was 5,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Yes, the chip is inside a leak-proof stainless steel probe, and the listing says it allows immersion in water and liquids.
From -55°C to +125°C with ±0.5°C accuracy within -10°C to +85°C.
Yes, the listing says a 4.7kΩ pull-up resistor is required between DATA and VCC.
Yes, each unit has a unique 64-bit ID that allows several probes on the same wire.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.