Digital temperature sensor

حساس حرارة رقمي DS18B20 بعلبة TO-92 وواجهة 1-Wire | DS18B20 Digital Temperature Sensor IC, TO-92, 1-Wire

⁨حساس حرارة رقمي DS18B20 بعلبة TO-92 وواجهة 1-Wire | DS18B20 Digital Temperature Sensor IC, TO-92, 1-Wire⁩ — ⁨2,275 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Digital temperature sensor with 1-Wire interface
  • Measures -55°C to +125°C
  • ±0.5°C accuracy between -10°C and +85°C
  • Resolution adjustable from 9 to 12 bits
  • New TO-92 package, 1 months warranty
2,275IQD3,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

2,275IQD

Its price has held at 3,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DS18B20 digital temperature sensor in a TO-92 package with a 1-Wire interface, measuring -55°C to +125°C with ±0.5°C accuracy over a set range.

The DS18B20 is a digital temperature sensor that sends the reading directly as a digital value over a 1-Wire bus, so, per the listing, no analog-to-digital converter or calibration is needed. Each piece carries a unique 64-bit serial number, which allows several sensors on a single wire with each read separately.

The measurement range is -55°C to +125°C, with ±0.5°C accuracy between -10°C and +85°C. Digital resolution is adjustable from 9 to 12 bits depending on the reading speed you need, and conversion time is up to about 750ms at 12-bit resolution. The operating voltage is 3.0V to 5.5V, and it supports Parasite Power through the data line. The TO-92 package has 3 pins in the order GND, DQ and VDD.

It is used to monitor temperature in incubators, stores and server rooms, in heating and cooling systems and temperature-based fan control, to measure water and soil temperature with the waterproof encapsulated version (a version this listing does not sell as a product), and in Arduino and ESP32 projects. An important requirement: place a 4.7kΩ pull-up resistor between the data line and the supply or the sensor will not respond, and watch the pin order, because reversing supply and ground heats the chip and destroys it within seconds. The item is new, the box holds one sensor in a TO-92 package, and the warranty is 1 months.

Suitable for

  • Monitoring temperature in incubators, stores and server rooms
  • Heating, cooling and fan-control systems
  • Arduino and ESP32 temperature-logging projects

Seller's description

حساس حرارة رقمي يرسل القراءة مباشرة كقيمة رقمية عبر ناقل 1-Wire، فلا حاجة إلى محوّل تناظري رقمي أو معايرة. يحمل كل قطعة رقماً تسلسلياً فريداً بطول 64 بت، ما يسمح بربط عدة حساسات على سلك واحد وقراءة كل واحد منها على حدة. دقته العالية ومداه الواسع جعلاه المعيار الفعلي في مشاريع مراقبة الحرارة.

أبرز المزايا

  • مدى قياس واسع من -55°C إلى +125°C.
  • دقة ±0.5°C ضمن المدى من -10°C إلى +85°C.
  • دقة قابلة للضبط من 9 إلى 12 بت حسب سرعة القراءة المطلوبة.
  • ناقل 1-Wire يحتاج طرفاً واحداً للبيانات لعدة حساسات معاً.
  • رقم تسلسلي فريد 64 بت لكل قطعة يميّزها على الناقل.
  • يدعم التغذية الطفيلية Parasite Power من خط البيانات نفسه.

الاستخدامات الشائعة

  • مراقبة حرارة الحاضنات والمخازن وغرف الخوادم.
  • أنظمة التدفئة والتبريد والتحكم بالمراوح حسب الحرارة.
  • قياس حرارة الماء والتربة بالنسخة المغلّفة المقاومة للماء.
  • مشاريع Arduino و ESP32 لتسجيل الحرارة على مدار الوقت.

ملاحظة: ضع مقاومة رفع pull-up بقيمة 4.7kΩ بين خط البيانات والتغذية وإلا لن يستجيب الحساس. وانتبه لترتيب الأطراف، فعكس التغذية والأرضي يسخّن الشريحة ويتلفها خلال ثوانٍ.

What's in the box

حساس حرارة DS18B20 واحد بعلبة TO-92

Specifications

Sensor typeحساس حرارة رقمي
Interface1-Wire بطرف بيانات واحد
PackageTO-92 (3 أطراف)
Measurement range-55°C إلى +125°C
Accuracy±0.5°C بين -10°C و +85°C
Digital resolutionقابلة للضبط من 9 إلى 12 بت
Operating voltage3.0V إلى 5.5V
المعرّفرقم تسلسلي فريد 64 بت لكل قطعة
التغذية الطفيليةمدعومة عبر خط البيانات
المقاومة المطلوبةpull-up بقيمة 4.7kΩ على خط البيانات
زمن التحويلحتى نحو 750ms عند دقة 12 بت
ترتيب الأطرافGND و DQ و VDD
CategorySemiconductors, ICs & Electronic Components
More categoriesIntegrated circuits
ConditionNew
Warranty1-month warranty
SKUNTK-0353

Questions about حساس حرارة رقمي DS18B20 بعلبة TO-92 وواجهة 1-Wire | DS18B20 Digital Temperature Sensor IC, TO-92, 1-Wire

It currently costs 2,275 IQD (was 3,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
-55°C to +125°C, with ±0.5°C accuracy between -10°C and +85°C, according to the listing.
The listing warns that a 4.7kΩ pull-up resistor is needed between the data line and the supply, and that reversing supply and ground destroys the chip.
Yes, each piece has a unique 64-bit serial number, so several sensors can share one wire and be read separately, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.