GenericMotor driver shield
درع محركات L293D Motor Drive Shield board | Motor Driver Shield
درع محركات L293D Motor Drive Shield board | Motor Driver Shield — 7,438 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- L293D chip with 4 H-Bridge channels
- Runs 4 DC, 2 stepper or 2 servo motors
- Motor voltage from 4.5 to 36 volts
- Thermal protection and built-in Reset button
- New, with a 1 month warranty
Ask about stock or request a better price
Price
7,438IQDIts price has held at 8,750 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
L293D motor drive shield that controls 4 DC motors, 2 stepper motors or 2 servo motors, running on 4.5 to 36 volts with Arduino boards.
This is a motor drive shield based on the L293D chip. According to the listing it fits on Arduino boards such as the Mega, Diecimila and Duemilanove. It lets you control 4 DC motors at once, or 2 stepper motors, or 2 servo motors, which suits robotics and motion-control projects.
It has 4 H-Bridge channels, each giving 0.6 amp of continuous current with a 1.2 amp peak, plus thermal protection. The motor supply range is 4.5 volts to 36 volts, which the listing says makes it suitable for larger motors; always match your motor voltage to that range and make sure its current does not exceed the limits of each channel.
It also includes two connectors for 5V servo motors with a high-precision timer to prevent jitter, a built-in Reset button, and pull-down resistors that stop the motors from running during start-up. The listing mentions individual speed control with 8-bit resolution.
When installing, use the two external power connectors to give the motors a separate supply from the Arduino logic voltage, which keeps the system stable. The item is new, the box contains one shield, and the stated warranty is 1 month against factory operating defects, excluding misuse.
Suitable for
- Robotics projects
- Controlling DC, stepper and servo motors
- Arduino projects that drive several motors
Seller's description
درع محركات L293D Motor Drive Shield board
يعتبر درع المحركات L293D Motor Drive Shield board حلاً متكاملاً ومثاليًا لمشاريع الروبوتات والتحكم بالحركة، حيث صُمم ليتوافق بشكل مباشر مع لوحات أردوينو مثل Mega وDiecimila وDuemilanove. يعتمد هذا الدرع على شريحة L293D المتطورة، وهي عبارة عن مشغل أحادي متكامل عالي الجهد والتيار، مما يتيح لك التحكم في أربعة محركات تيار مستمر (DC) في وقت واحد أو محركين خطويين (Stepper) أو محركين سيرفو.
يتميز هذا الدرع بوجود أربع قناطر H-Bridge، حيث توفر كل قنطرة تياراً مستمراً يصل إلى 0.6 أمبير مع ذروة تيار تصل إلى 1.2 أمبير، بالإضافة إلى ميزة الحماية الحرارية لضمان سلامة المكونات. كما يدعم الدرع تشغيل المحركات بجهد يتراوح من 4.5 فولت إلى 36 فولت، مما يجعله مناسباً للمحركات الكبيرة. يتضمن التصميم واجهتين مخصصتين لمحركات السيرفو 5 فولت مع مؤقت عالي الدقة لمنع الاهتزاز، وزر إعادة تعيين (Reset) مدمج.
المواصفات الفنية والتشغيل
- يدعم تشغيل 4 محركات DC أو 2 محرك خطوي أو 2 محرك سيرفو.
- يحتوي على 4 قناطر H-Bridge مع حماية حرارية.
- تيار تشغيل 0.6 أمبير لكل قنطرة مع ذروة 1.2 أمبير.
- نطاق جهد تشغيل المحركات من 4.5 فولت إلى 36 فولت.
- واجهتان خارجيتان للطاقة لفصل مصدر طاقة المنطق عن المحركات.
- مقاومات سحب (Pull-down) لمنع تشغيل المحركات أثناء بدء التشغيل.
عند التركيب، تأكد من استخدام واجهات الطاقة الخارجية المخصصة لتوفير جهد منفصل للمحركات بعيداً عن جهد المنطق الخاص بالأردوينو، مما يضمن استقرار النظام. تأكد دائماً من مطابقة جهد المحركات المستخدمة مع نطاق الجهد المدعوم لتجنب التلف، واستفد من ميزة التحكم الفردي في السرعة بدقة 8-بت لتحقيق أفضل أداء في مشاريعك.
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من L293D Motor Drive Shield board..
Specifications
| Brand | Generic |
|---|---|
| Model | L293D Motor Drive Shield board. |
| Motor voltage | من 4.5 فولت إلى 36 فولت |
| Current per channel | 0.6 أمبير مع ذروة 1.2 أمبير |
| Supported motors | 4 محركات DC أو 2 محرك خطوي أو 2 محرك سيرفو |
| Compatibility | Mega وDiecimila وDuemilanove |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT modules and developer kits |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XBA6571946E7 |




