Thermal adhesive tape
شريط لاصق حراري بوجهين عرض 15mm وطول 25m وسماكة 0.2mm بتوصيل 1.5 W/m·K | Double-Sided Thermal Conductive Adhesive Tape 15mm x 25m, 0.2mm, 1.5 W/m·K
شريط لاصق حراري بوجهين عرض 15mm وطول 25m وسماكة 0.2mm بتوصيل 1.5 W/m·K | Double-Sided Thermal Conductive Adhesive Tape 15mm x 25m, 0.2mm, 1.5 W/m·K — 4,200 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Double-sided, 15mm wide
- 25m roll, 0.2mm thick
- Thermal conductivity 1.5 W/m·K
- Withstands 120°C continuously
- New, with a 1 months warranty
Ask about stock or request a better price
Price
4,200IQDIts price has held at 5,250 IQD for the last 11 days.
About this item
Double-sided thermal transfer tape for fixing heatsinks onto chips without screws or clips, 15mm wide, 25m long and 0.2mm thick.
This is a double-sided thermal transfer adhesive tape used to fix heatsinks onto chips without screws or clips. It is 15mm wide, 25m long per roll and only 0.2mm thick, and that thin layer shortens the thermal distance between the surfaces. Its thermal conductivity is 1.5 W/m·K, the breakdown voltage is 4kV so it insulates electrically, and the bonding strength is about 1.3kg per inch.
It withstands 120°C continuously and 180°C for short periods. The listing mentions use with MOSFET chips, voltage regulators, LED chips, graphics card memory, processors and small heatsinks, and for quick repairs. Cut it to the length you need and peel the protective layer from both sides. Clean both surfaces of dust and oil before sticking and press firmly for a few seconds; the listing notes it is less efficient than thermal paste with a clamping bracket under high loads. The item is new with a 1 months warranty and includes a roll.
Suitable for
- Fixing small heatsinks onto MOSFET chips and voltage regulators
- Cooling LED chips on aluminium bases
- Fixing graphics card memory heatsinks
- Quick repairs where screws or clips are not possible
Seller's description
شريط نقل حراري لاصق من الوجهين يُستخدم لتثبيت المشتتات على الشرائح دون براغٍ أو مشابك، بعرض 15mm وطول لفة 25m وسماكة 0.2mm فقط. يجمع بين لصق ميكانيكي بقوة تقارب 1.3kg لكل إنش وتوصيل حراري 1.5 W/m·K وعزل كهربائي حتى 4kV، ويتحمل 120°C تشغيلاً مستمراً و180°C لفترات قصيرة، فيصلح لشرائح LED والمعالجات وذاكرة كروت الشاشة.
أبرز المزايا
- توصيل حراري 1.5 W/m·K ينقل حرارة الشريحة إلى المشتت مباشرة
- عزل كهربائي حتى 4kV يمنع القصر بين أرجل الشريحة وجسم المشتت
- قوة لصق نحو 1.3kg لكل إنش تكفي لتثبيت مشتتات صغيرة ومتوسطة بلا براغٍ
- سماكة 0.2mm فقط تقلّل المسافة الحرارية بين السطحين
- تحمّل حراري 120°C مستمر و180°C لفترات قصيرة
- لفة 25m بعرض 15mm تكفي عدداً كبيراً من عمليات التثبيت
الاستخدامات الشائعة
- تثبيت مشتتات صغيرة على شرائح MOSFET ومنظمات الفولتية
- تبريد شرائح LED عالية القدرة وشرائط الإنارة على قواعد الألمنيوم
- تثبيت مشتتات ذاكرة كروت الشاشة وشرائح الجسور
- أعمال الصيانة السريعة حيث يتعذر استخدام البراغي أو المشابك
ملاحظة: نظّف السطحين من الغبار والزيت قبل اللصق واضغط بثبات بضع ثوانٍ ليكتمل الالتصاق. الشريط بديل مريح لكنه أقل كفاءة من المعجون الحراري مع مشبك ضاغط في الأحمال العالية.
What's in the box
لفة واحدة من الشريط الحراري اللاصق بعرض 15mm وطول 25 متر
Specifications
| Product type | شريط نقل حراري لاصق من الوجهين |
|---|---|
| Thermal conductivity | 1.5 W/m·K |
| Thickness | 0.2mm |
| Width | 15mm |
| Roll length | 25 متر |
| Adhesion strength | نحو 1.3kg لكل إنش |
| Breakdown voltage | 4kV |
| Continuous heat tolerance | 120°C |
| تحمّل الحرارة اللحظي | 180°C |
| طريقة الاستخدام | يُقص بالطول المطلوب وتُنزع الطبقة الواقية من الوجهين |
| الميزة الوظيفية | يثبّت المشتت ميكانيكياً وينقل الحرارة في آن واحد |
| الاستخدام النموذجي | شرائح LED والمعالجات وذاكرة كروت الشاشة والمشتتات الصغيرة |
| Category | PC Components & Modding |
| More categories | Cooling systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0574 |




