MP3 player module

وحدة تشغيل صوت DFPlayer Mini MP3 للأردوينو | DFPlayer Mini MP3 Player Module for Arduino

⁨وحدة تشغيل صوت DFPlayer Mini MP3 للأردوينو | DFPlayer Mini MP3 Player Module for Arduino⁩ — ⁨4,038 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Plays MP3, WAV and WMA from a microSD card
  • UART control at 9600 baud
  • Built-in mono amplifier for a 4Ω - 8Ω speaker
  • Volume levels from 0 to 30
  • No microSD card and no speaker included
4,038IQD4,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,038IQD

Its price has held at 4,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DFPlayer Mini module playing MP3, WAV and WMA files from a microSD card with a built-in mono amplifier, running from 3.2V to 5.0V over UART.

A small module that plays audio files from a microSD card and adds sound to Arduino and ESP32 projects without an external sound processor. It combines an MP3 player, a 24-bit DAC and a built-in mono amplifier, and is controlled by serial UART commands at 9600 baud (8N1) to choose the file, folder and volume.

Supported formats are MP3, WAV and WMA, and the storage medium is a microSD card formatted FAT16 or FAT32. Volume levels run from 0 to 30 and can be set in software, with ready-made EQ effects. Files are organized in numbered folders and numbered tracks that can be called by number. The module runs from 3.2V to 5.0V DC, so according to the listing it suits both 3.3V and 5V boards.

The amplifier is mono on pins SPK1 and SPK2 and drives a 4Ω - 8Ω speaker directly; do not connect a speaker below 4Ω to avoid straining the amplifier. For cleaner sound there are DAC_L and DAC_R outputs for an external amplifier. The BUSY pin tells the controller when a clip has finished, and the IO_1 and IO_2 pins allow button operation even without a controller. It has 16 pins at 2.54mm spacing.

When connecting to a TX pin that runs at 5V, place a resistor of about 1kΩ on the module's RX line to protect its input. The box contains one DFPlayer Mini module without a microSD card and without a speaker, so those must be bought separately. The item is new and the stated warranty is 1 month.

Suitable for

  • Alert messages and voice announcements inside devices
  • Talking educational toys and models
  • Alarm and audio notification systems
  • Sound effects for displays and exhibits

Seller's description

وحدة صغيرة لتشغيل ملفات الصوت من بطاقة microSD وإضافة الصوت إلى مشاريع Arduino و ESP32 دون معالج صوت خارجي. تجمع الوحدة بين مشغّل MP3 ومحوّل DAC ومضخّم صوت أحادي مدمج، وتُدار بأوامر تسلسلية UART بسيطة تختار الملف والمجلد ومستوى الصوت. تدعم صيغ MP3 و WAV و WMA وتعمل من 3.2V إلى 5V، ما يجعلها مناسبة للوحات 3.3V و5V معاً.

أبرز المزايا

  • مضخّم مونو مدمج يقود سماعة 4Ω - 8Ω مباشرة من طرفي SPK1 و SPK2
  • تحكم كامل عبر UART بسرعة 9600 باود بأوامر قصيرة لاختيار المسار والمجلد
  • ثلاثون مستوى صوت قابلة للضبط برمجياً مع مؤثرات EQ جاهزة
  • مخرجا DAC_L و DAC_R لتوصيل مضخّم خارجي عند الحاجة إلى صوت أنظف
  • وضع تشغيل بالأزرار عبر أطراف IO يعمل حتى بدون متحكم
  • طرف BUSY يخبر المتحكم متى انتهى تشغيل المقطع

الاستخدامات الشائعة

  • رسائل تنبيه وإعلانات صوتية داخل الأجهزة والمشاريع
  • الألعاب والمجسّمات التعليمية الناطقة
  • أنظمة الإنذار والإشعار الصوتي في المنزل والورشة
  • المؤثرات الصوتية في الديكور والمعارض والواجهات التفاعلية

ملاحظة: ضع مقاومة نحو 1kΩ على خط RX للوحدة عند وصلها بمنفذ TX يعمل على 5V لحماية مدخلها، ولا توصّل سماعة أقل من 4Ω على مخرجي SPK لتفادي إجهاد المضخّم.

What's in the box

وحدة DFPlayer Mini واحدة بدون بطاقة microSD وبدون سماعة.

Specifications

Functionمشغّل ملفات صوت MP3 مع مضخّم مدمج
Operating voltage3.2V - 5.0V DC
Control interfaceUART تسلسلي 9600 baud (8N1)
Supported formatsMP3، WAV، WMA
Storage mediumبطاقة microSD بنظام FAT16 أو FAT32
Amplifier outputمونو على SPK1/SPK2 لسماعة 4Ω - 8Ω
Pin count16 طرفاً بمسافة 2.54mm
خرج الخطDAC_L و DAC_R لمضخّم خارجي
مستويات الصوت0 - 30 قابلة للضبط برمجياً
محوّل DAC24-bit
أطراف إضافيةBUSY لحالة التشغيل، و IO_1/IO_2 للتشغيل بالأزرار
تنظيم الملفاتمجلدات مرقّمة ومسارات مرقّمة يمكن استدعاؤها بالرقم
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0430

Questions about وحدة تشغيل صوت DFPlayer Mini MP3 للأردوينو | DFPlayer Mini MP3 Player Module for Arduino

It currently costs 4,038 IQD (was 4,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
MP3, WAV and WMA from a microSD card formatted FAT16 or FAT32.
No, the box has one module without a microSD card and without a speaker.
A 4Ω - 8Ω speaker directly on SPK1 and SPK2; do not connect one below 4Ω.
Yes, it runs from 3.2V to 5.0V DC, so it suits 3.3V and 5V boards per the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.