DC power jack
مقبس تغذية DC أنثى 5.5x2.1mm بتيار 3A للتركيب على العلبة | DC Power Jack Socket Female 5.5x2.1mm 3A 12V, Panel Mount
مقبس تغذية DC أنثى 5.5x2.1mm بتيار 3A للتركيب على العلبة | DC Power Jack Socket Female 5.5x2.1mm 3A 12V, Panel Mount — 2,100 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 5.5mm outer and 2.1mm inner
- Maximum current 3A
- Panel mount on the enclosure
- Exposed solder terminals
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,100IQDIts price has held at 3,000 IQD for the last 11 days.
About this item
Female DC power jack, 5.5mm outer and 2.1mm inner, up to 3A, panel-mounted as a power inlet for 12V devices.
This is a female DC power jack measuring 5.5mm outer and 2.1mm inner, handling a current of up to 3A, mounted on the enclosure panel (Panel mount) to form a clean, sturdy power inlet for your device. It accepts the standard 5.5x2.1mm male plug used on most 12V adapters, and its metal terminals are ready for soldering wires.
It is a practical choice when building a power supply or a project box that needs a fixed inlet instead of a cable leaving through a hole, and it gives the device a quick disconnect point without cutting wires. The contacts are plated spring copper and hold the plug firmly. It is also used as a power inlet in development boards, routers and network devices, LED lighting systems and security cameras, and to replace a damaged power jack in an existing device.
Before buying, confirm the size of your adapter's plug: it must be 5.5x2.1mm. When soldering, check the polarity, since the centre pin is positive on most adapters and reversing it damages the connected device. Do not exceed 3A on this jack because the contact point is small and heats quickly.
The listing does not state the panel mounting hole diameter or the body length, so ask the shop through chat if you need them. The item is new, the box holds one jack, and the warranty is 1 month.
Suitable for
- Power inlet in project boxes and home-built supplies
- Development boards, routers and network devices
- LED lighting systems and security cameras
- Replacing a damaged power jack in an existing device
Seller's description
مقبس تغذية DC أنثى بمقاس 5.5mm خارجي و2.1mm داخلي يتحمل تياراً حتى 3A، يُثبَّت على واجهة العلبة ليكوّن مدخل طاقة نظيفاً ومتيناً لجهازك. يقبل القابس الذكر القياسي المستخدم في أغلب محوّلات 12V، وأطرافه معدنية جاهزة للحام بالأسلاك. خيار عملي عند تصنيع مزوّد طاقة أو علبة مشروع تحتاج مدخلاً ثابتاً بدل سلك خارج من فتحة.
أبرز المزايا
- مقاس قياسي 5.5x2.1mm يتوافق مع معظم محوّلات 12V
- يتحمل تياراً حتى 3A يكفي لأغلب أحمال 12V الصغيرة
- تثبيت على واجهة العلبة يمنح مدخلاً متيناً ونظيفاً
- أطراف لحام مكشوفة يسهل الوصول إليها
- تماسات معدنية نابضة تمسك القابس بثبات
- يوفّر نقطة فصل سريعة للجهاز دون قص الأسلاك
الاستخدامات الشائعة
- مدخل طاقة في علب المشاريع ومزوّدات الطاقة اليدوية
- لوحات التطوير والراوترات وأجهزة الشبكات
- أنظمة الإضاءة LED وكاميرات المراقبة
- استبدال مقبس تغذية تالف في جهاز موجود
ملاحظة: لا تتجاوز 3A على هذا المقبس لأن نقطة التماس صغيرة وتسخن بسرعة. وتحقق من القطبية عند اللحام: السن الداخلي موجب في أغلب المحوّلات، وعكسه يتلف الجهاز الموصول.
What's in the box
مقبس تغذية DC أنثى واحد قياس 5.5x2.1mm
Specifications
| Size | 5.5mm خارجي / 2.1mm داخلي |
|---|---|
| Type | أنثى (Jack / Socket) |
| Maximum current | 3A |
| Common voltage | 12V DC |
| Mounting | على واجهة العلبة (Panel mount) |
| Connection | أطراف لحام |
| Mating plug | قابس DC ذكر قياسي 5.5x2.1mm |
| القطبية | السن الداخلي موجب في أغلب المحوّلات |
| مادة التماسات | نحاس نابض مطلي |
| الاستخدام | مدخل طاقة لعلب المشاريع وأجهزة 12V |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0209 |




