DC-DC boost converter

محوّل رافع للفولتية DC-DC بخرج أقصى 28V وتيار 2A | DC-DC Step-Up Boost Converter Module Max Output 28V 2A

⁨محوّل رافع للفولتية DC-DC بخرج أقصى 28V وتيار 2A | DC-DC Step-Up Boost Converter Module Max Output 28V 2A⁩ — ⁨8,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Adjustable output up to 28V
  • Maximum output current 2A
  • Trimmer adjustment on the board
  • Four solder points for input and output
  • New, with a 1 months warranty
8,500IQD10,000IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

8,500IQD

Its price has held at 10,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Small DC-DC step-up board with an adjustable output of up to 28V and a maximum of 2A, for powering 12V circuits from low-voltage batteries.

This is a small DC-DC step-up board giving an adjustable output of up to 28V with a maximum current of 2A. It works by switching through an inductor and a capacitor, so it raises voltage far more efficiently than linear regulators, and it is adjusted with a small trimmer on the board.

It is used when the source voltage is lower than the circuit needs, such as running a 12V load from a 5V or 9V battery. Uses include raising battery voltage to feed 12V circuits, Arduino and sensor projects that need a higher voltage, running LEDs and small fans from a low source, and portable circuits running on a lithium cell.

It is a small board with four solder points (input + / - and output + / -), suited to portable projects and easy to integrate. The operating condition is that the output voltage must be higher than the input voltage. Adjust the output with a multimeter before connecting the load.

An important point: the 2A is a theoretical maximum and falls as the gap between input and output widens, and the listing recommends not exceeding half of the value continuously. The unit is new according to the listing with a 1 months warranty and comes as one board. The listing does not state the minimum input voltage or numeric dimensions, so ask the shop through chat.

Suitable for

  • Raising battery voltage to feed 12V circuits
  • Arduino and sensor projects needing a higher voltage
  • Running LEDs and small fans from a low source
  • Portable circuits running on a lithium cell

Seller's description

لوحة رفع فولتية DC-DC صغيرة تعطي خرجًا قابلًا للضبط يصل إلى 28V بتيار أقصى 2A. تعمل بمبدأ التبديل عبر ملف ومكثف فترفع الفولتية بكفاءة أعلى بكثير من المنظمات الخطية. تُستخدم عندما تكون فولتية المصدر أقل مما تحتاجه الدائرة، مثل تشغيل حمل 12V من بطارية 5V أو 9V، والضبط يتم بمقاومة متغيرة صغيرة على اللوحة.

أبرز المزايا

  • خرج قابل للضبط حتى 28V بتيار أقصى 2A
  • كفاءة تحويل عالية مقارنة بالمنظمات الخطية
  • مقاومة متغيرة على اللوحة لضبط الخرج بدقة
  • لوحة صغيرة بأربع نقاط لحام سهلة الدمج في أي مشروع
  • مناسبة للتغذية من البطاريات ذات الفولتية المنخفضة

الاستخدامات الشائعة

  • رفع فولتية البطاريات لتغذية دوائر 12V
  • مشاريع الأردوينو والحساسات التي تحتاج فولتية أعلى
  • تشغيل الليدات والمراوح الصغيرة من مصدر منخفض
  • الدوائر المحمولة التي تعمل على خلية ليثيوم

ملاحظة: اضبط الخرج بالمالتيميتر قبل توصيل الحمل. التيار المذكور قيمة قصوى نظرية وينخفض كلما اتسع الفارق بين الدخل والخرج، ويُنصح بعدم تجاوز نصف القيمة باستمرار.

What's in the box

لوحة رفع فولتية DC-DC واحدة

Specifications

Converter typeرافع للفولتية (Step-Up / Boost)
Max output voltage28V
Max output current2A
Adjustment methodمقاومة متغيرة على اللوحة
Connectionsأربع نقاط لحام (دخل + / - وخرج + / -)
مبدأ العملتحويل بالتبديل عبر ملف ومكثف
الكفاءةأعلى بكثير من المنظمات الخطية
شرط التشغيلفولتية الخرج أعلى من فولتية الدخل
الحجملوحة صغيرة تناسب المشاريع المحمولة
ملاحظة تشغيلالتيار الأقصى يقل كلما زاد فارق الفولتية
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesInverters and converters
ConditionNew
Warranty1-month warranty
SKUNTK-0253

Questions about محوّل رافع للفولتية DC-DC بخرج أقصى 28V وتيار 2A | DC-DC Step-Up Boost Converter Module Max Output 28V 2A

It currently costs 8,500 IQD (was 10,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
An output voltage of up to 28V and a maximum current of 2A, according to the listing.
The listing says 2A is a theoretical maximum that falls as the gap between input and output widens, and recommends not exceeding half of it continuously.
No, it only steps up, and the output voltage must be higher than the input voltage.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.