DC-DC boost converter
وحدة رفع فولتية DC-DC بتيار 5A من دخل 3.3-35V إلى خرج 5-40V | 5A DC-DC Step-Up Boost Converter, 3.3V-35V Input to 5V-40V Output
وحدة رفع فولتية DC-DC بتيار 5A من دخل 3.3-35V إلى خرج 5-40V | 5A DC-DC Step-Up Boost Converter, 3.3V-35V Input to 5V-40V Output — 5,313 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Wide input from DC 3.3V to 35V
- Adjustable output from 5V to 40V
- Maximum output current 5A
- Set with a variable resistor on the board
- New, with a 1-month warranty
Ask about stock or request a better price
Price
5,313IQDIts price has held at 6,250 IQD for the last 11 days.
About this item
DC-DC step-up boost converter accepting 3.3V to 35V in and giving an adjustable 5V to 40V out at up to 5A.
This is a step-up (boost) converter module that accepts a DC 3.3V to 35V input and gives an adjustable DC 5V to 40V output at a maximum of 5A. It is used when the source voltage is lower than the load voltage, such as running a 12V device from a 5V battery or raising the output of a small solar panel to charge a larger battery.
The output is set with a variable resistor on the board. Operation requires the output voltage to be higher than the input, so this is a boost-only module and does not step voltage down. The listing says its efficiency is high compared with linear regulators, and that it suits powering LED strips and motors from a low source, as well as mobile power projects and embedded systems.
One point many people miss: in boost modules the input current is always higher than the output current. The listing notes that drawing 5A at 12V from a 5V source needs more than 12A from the source, so make sure the supply and the wires can handle it. At high currents, ventilation or a heat sink is needed.
Connection is through solder terminals or clips for input and output. The product is new with a 1-month warranty, and the box contains the 5A boost module without wires, so prepare the wiring yourself.
Suitable for
- Running 12V devices from a battery or USB port
- Raising the voltage of small solar panels
- Powering LED strips and motors from a low source
Seller's description
وحدة تحويل رافعة للفولتية تقبل دخلاً من 3.3V إلى 35V وتعطي خرجاً قابلاً للضبط من 5V إلى 40V بتيار يصل إلى 5A. تُستعمل عندما تكون فولتية المصدر أقل من فولتية الحمل، مثل تشغيل جهاز 12V من بطارية 5V أو رفع خرج لوح شمسي صغير لشحن بطارية أكبر.
أبرز المزايا
- رفع الفولتية من مصدر منخفض إلى حمل أعلى
- تيار خرج يصل إلى 5A في الظروف المناسبة
- مدى دخل واسع من 3.3V حتى 35V
- خرج قابل للضبط بمقاومة متغيّرة على اللوحة
- كفاءة عالية مقارنة بالمنظّمات الخطية
الاستخدامات الشائعة
- تشغيل أجهزة 12V من بطارية أو منفذ USB
- رفع فولتية الألواح الشمسية الصغيرة
- تغذية شرائط الليد ومحركات من مصدر منخفض
- مشاريع الطاقة المتنقلة والأنظمة المدمجة
ملاحظة: تيار الدخل في وحدات الرفع أعلى من تيار الخرج دائماً؛ لسحب 5A عند 12V من مصدر 5V تحتاج أكثر من 12A من المصدر، فتأكد أن المزوّد والأسلاك تتحمّل ذلك قبل الشكوى من ضعف الأداء.
What's in the box
وحدة رفع فولتية واحدة 5A (بدون أسلاك)
Specifications
| Conversion type | رافع فولتية (Boost) |
|---|---|
| Input voltage | DC 3.3V – 35V |
| Output voltage | DC 5V – 40V قابلة للضبط |
| Maximum output current | 5A |
| Adjustment | مقاومة متغيّرة على اللوحة |
| Connection | أطراف لحام أو مشابك للدخل والخرج |
| الكفاءة | عالية مقارنة بالمنظّمات الخطية |
| شرط التشغيل | فولتية الخرج أعلى من الدخل |
| متطلب التبريد | تهوية أو مشتّت عند التيارات العالية |
| الاستعمال النموذجي | رفع فولتية البطاريات والألواح الشمسية |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Inverters and converters |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0921 |




