Time delay relay module
كارت تأخير زمني بريليه يعمل على DC 12V بزمن قابل للضبط من 0 إلى 10 ثوانٍ | DC 12V Adjustable Time Delay Relay Module, 0–10 Seconds
كارت تأخير زمني بريليه يعمل على DC 12V بزمن قابل للضبط من 0 إلى 10 ثوانٍ | DC 12V Adjustable Time Delay Relay Module, 0–10 Seconds — 3,613 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- DC 12V supply
- Adjustable delay from 0 to 10 seconds
- Dry-contact relay output isolated from control
- Screw terminals for the load
- New, with a 1 month warranty
Ask about stock or request a better price
Price
3,613IQDIts price has held at 4,250 IQD for the last 11 days.
About this item
DC 12V time delay relay module with an adjustable delay of 0 to 10 seconds, for delaying fans and pumps.
This is a Delay-On time delay module with a relay output, running on DC 12V. Timing starts as soon as power reaches the module, then it switches the relay after an adjustable delay of 0 to 10 seconds set by a Trimmer variable resistor mounted on the board itself.
The listing says the delay can be extended to hours by replacing the timing capacitor with a larger value. The output is a dry relay contact that electrically isolates the load from the control circuit, and the module runs from a single 12V supply with no extra source. The load connects through screw terminals, which make connecting and disconnecting easy without soldering.
Before connecting a load, check the relay contact rating. With inductive loads such as motors and contactor coils, add a reverse diode or a snubber capacitor depending on the current type, because sparking welds the contacts over time. The listing does not state the contact rating in amps or volts, so ask the shop through chat if you need it.
It mounts using holes in the board corners, inside a control box or the body of a device. Uses named include delaying a fan or pump after the main device starts, sequencing loads to reduce start-up current, alarm and protection circuits that need a grace period, and educational projects. The item is new with a stated warranty of 1 month, and the contents are one 12V time delay module.
Suitable for
- Delaying a fan or pump after the device starts
- Sequencing loads to reduce start-up current
- Alarm and protection circuits that need a delay
- Educational projects and control circuit experiments
Seller's description
كارت تأخير زمني بسيط يعمل بفولتية DC 12V، يبدأ العدّ فور وصول التغذية ثم يشغّل الريليه بعد مدة قابلة للضبط من 0 إلى 10 ثوانٍ عبر مقاومة متغيرة مركّبة على اللوحة نفسها. يمكن إطالة المدة إلى ساعات باستبدال المتسعة الزمنية بقيمة أكبر. الخرج تلامس ريليه جاف يعزل الحمل كهربائياً عن دائرة التحكم، فيصلح لتأخير تشغيل المراوح والمضخات.
أبرز المزايا
- زمن تأخير قابل للضبط من 0 إلى 10 ثوانٍ بمقاومة متغيرة على اللوحة
- إمكانية إطالة المدة إلى ساعات باستبدال المتسعة الزمنية بقيمة أكبر
- خرج ريليه بتلامس جاف يعزل الحمل تماماً عن دائرة التحكم
- يعمل بتغذية 12V واحدة دون حاجة إلى مصدر إضافي
- أطراف لولبية للحمل تسهّل التوصيل والفك دون لحام
- لوحة صغيرة تُركّب داخل صندوق التحكم أو جسم الجهاز
الاستخدامات الشائعة
- تأخير تشغيل مروحة أو مضخة بعد إقلاع الجهاز الرئيسي
- تتابع تشغيل الأحمال لتقليل تيار البدء على المصدر
- دوائر الإنذار وأنظمة الحماية التي تحتاج مهلة قبل التشغيل
- المشاريع التعليمية وتجارب دوائر التحكم
ملاحظة: تحقق من تقييم تلامس الريليه قبل ربط الحمل، ومع الأحمال الحثية مثل المحركات وملفات الكونتاكتور أضف متسعة إخماد أو دايود عكسي حسب نوع التيار، لأن الشرارة تلحم التلامسات مع الوقت.
What's in the box
كارت تأخير زمني واحد يعمل على 12V
Specifications
| Type | تأخير زمني Delay-On بخرج ريليه |
|---|---|
| Operating voltage | DC 12V |
| Delay range | 0 إلى 10 ثوانٍ |
| Adjustment | مقاومة متغيرة Trimmer على اللوحة |
| Output type | تلامس ريليه جاف Dry Contact |
| Load connection | أطراف لولبية Screw Terminals |
| إمكانية التمديد | استبدال المتسعة الزمنية بقيمة أكبر يمدد المدة إلى ساعات |
| لحظة بدء العدّ | عند وصول التغذية إلى الكارت |
| العزل | الحمل معزول كهربائياً عن دائرة التحكم |
| طريقة التركيب | ثقوب تثبيت في زوايا اللوحة |
| الحماية الموصى بها | دايود عكسي أو متسعة إخماد مع الأحمال الحثية |
| الاستخدام النموذجي | تأخير تشغيل المراوح والمضخات وتتابع الأحمال |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT modules and developer kits |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0320 |




