DIAC trigger diode

دايود DIAC نوع DB3 حزمة DO-35 لتشغيل TRIAC | DB3 DIAC Trigger Diode, DO-35 Package

⁨دايود DIAC نوع DB3 حزمة DO-35 لتشغيل TRIAC | DB3 DIAC Trigger Diode, DO-35 Package⁩ — ⁨1,575 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • DB3 bidirectional DIAC
  • Typical breakover voltage 32V, range 28–36V
  • Glass DO-35 package, THT mounting
  • No polarity, works in both directions
  • New, with a 1 months warranty
1,575IQD2,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,575IQD

Its price has held at 2,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DB3 bidirectional DIAC with a breakover voltage of about 32V in a glass DO-35 package, for triggering TRIAC gates in dimmer and power control circuits.

The DB3 is a bidirectional semiconductor of the DIAC type that acts as a switch, triggering when the breakover voltage is exceeded, which is about 32V with a range of 28–36V. Below this threshold it stays insulating; at the threshold it suddenly breaks over and passes a sharp current pulse used to trigger a TRIAC gate. It has no polarity so it works on both halves of the wave, and needs no polarity marking when installed.

The DO-35 package is glass with a lead at each end, and the mounting method is THT, meaning through holes on the board. The trigger voltage difference between directions is typically under 3V, and the operating temperature range is approximately -40°C to +125°C. The listing says it is the basic element in dimmer circuits and lamp drivers.

Listed uses include AC lamp dimmer circuits, triggering TRIAC and SCR gates in power control circuits, fluorescent lamp drivers and electronic lighting devices, speed control circuits for motors running on 220V, and simple RC-based timers and trigger sensors.

For safety: dimmer circuits are connected directly to the 220V mains and stay charged after disconnection, so cut the power and discharge the capacitors before touching. Use a heat-dissipating clamp when soldering because the glass package is sensitive to heat. The part is new and comes as 1 DB3 DIAC in a DO-35 package, with a 1 months warranty.

Suitable for

  • Lamp dimmer circuits
  • Triggering TRIAC and SCR gates
  • Fluorescent lamp drivers and electronic lighting
  • Motor speed control circuits on 220V

Seller's description

الـ DB3 عنصر شبه موصل ثنائي الاتجاه من نوع DIAC يعمل مفتاحاً يقدح عند تجاوز فولتية الانهيار، وهي نحو 32V (بمدى 28–36V). قبل هذه العتبة يبقى عازلاً، وعندها ينهار فجأة ويمرّر نبضة تيار حادة تُستخدم لقدح بوابة TRIAC. لا قطبية له فيعمل في نصفَي الموجة، ولذلك هو العنصر الأساسي في دوائر الديمر ومشغّلات المصابيح.

أبرز المزايا

  • فولتية انهيار نموذجية 32V (المدى المعتاد 28–36V)
  • عمل ثنائي الاتجاه فيقدح في نصفَي موجة التيار المتناوب
  • لا يحتاج تمييز قطبية عند التركيب
  • حزمة DO-35 زجاجية صغيرة بطرفين للتركيب THT
  • نبضة قدح حادة تضمن تشغيل بوابة TRIAC بشكل نظيف
  • سعره الزهيد يجعله بديلاً بسيطاً لدائرة قدح كاملة

الاستخدامات الشائعة

  • دوائر خفض إضاءة المصابيح (Dimmer) بالتيار المتناوب
  • قدح بوابات TRIAC وSCR في دوائر التحكم بالقدرة
  • مشغّلات مصابيح الفلورسنت وأجهزة الإنارة الإلكترونية
  • دوائر التحكم بسرعة المحركات العاملة على 220V
  • مؤقتات وحساسات قدح بسيطة بمبدأ RC

ملاحظة: دوائر الديمر متصلة مباشرة بالشبكة 220V وتبقى مشحونة بعد الفصل؛ افصل التيار وأفرغ المكثّفات قبل اللمس. واستخدم كماشة تبديد حرارة عند اللحام لأن الحزمة الزجاجية حساسة للحرارة.

What's in the box

دايود DIAC نوع DB3 واحد بحزمة DO-35

Specifications

Component typeDIAC ثنائي الاتجاه (Trigger diode)
Part numberDB3 / DB-3
Breakover voltage32V نموذجي (28–36V)
Package typeDO-35 زجاجية بطرفين
MountingTHT (فتحات على اللوحة)
Polarityلا يوجد؛ يعمل في الاتجاهين
Operating temperature-40°C إلى +125°C تقريباً
فرق فولتية القدح بين الاتجاهينأقل من 3V نموذجياً
الوظيفةتوليد نبضة قدح لبوابة TRIAC أو SCR
التطبيق النموذجيدوائر Dimmer والتحكم بقدرة 220V
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0285

Questions about دايود DIAC نوع DB3 حزمة DO-35 لتشغيل TRIAC | DB3 DIAC Trigger Diode, DO-35 Package

It currently costs 1,575 IQD (was 2,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
It triggers a TRIAC or SCR gate with a sharp current pulse when the breakover voltage is exceeded, according to the listing.
About 32V typical, with a range of 28–36V.
No, it has no polarity and works in both directions.
A glass DO-35 package with a lead at each end and THT through-hole mounting.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.