Bridge rectifier

قنطرة توحيد DB207S سطحية التركيب بتيار 2A وفولتية 1000V | DB207S SMD Bridge Rectifier 2A 1000V DBS Package

⁨قنطرة توحيد DB207S سطحية التركيب بتيار 2A وفولتية 1000V | DB207S SMD Bridge Rectifier 2A 1000V DBS Package⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 2A output current and 1000V reverse voltage
  • 4 diodes in one DBS package
  • Surface-mount SMD package with 4 terminals
  • Surge current of 60A
  • New, with a 1 months warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DB207S single-phase surface-mount bridge rectifier with 2A output current and 1000V reverse voltage, for small power supplies, chargers and control boards.

The DB207S is a single-phase full-wave surface-mount bridge rectifier with a 2A output current and a maximum reverse voltage of 1000V. It holds 4 diodes inside one DBS package with bent leads for surface soldering onto the board, which replaces soldering 4 separate diodes and reduces the number of solder points. According to the listing it is the highest-current option in this family when a 1A or 1.5A bridge is not enough.

It is used in small power supplies, chargers and control boards that run directly from mains voltage. The listing mentions power supplies and chargers working on 220V, industrial control boards and household appliances, rectifying transformer output in linear circuits, and supply inputs on lighting and fan boards. The 2A output gives more headroom in continuously loaded supplies, and the 1000V reverse voltage withstands mains pulses and sudden surges.

Other stated specifications: maximum RMS input voltage of 700V, forward voltage drop of 1.0V per element at 1A, surge current of 60A for a half cycle of 8.3ms (enough to handle charging the filter capacitor at switch-on), and a typical reverse leakage current of 5µA at 25°C. Operating temperature runs from -55°C to +150°C, and cooling happens through the solder feet and the copper area on the board. There are 4 terminals in the order AC, AC, + and -.

Before buying, make sure your board is designed for the surface-mount DBS package rather than a bridge with legs. The listing advises placing an NTC resistor or a small limiting resistor on the input if the filter capacitor is large, because the inrush charging current when the device is switched on is what most often kills these bridges after repeated power cycles. The part is new and comes as one DB207S bridge, with a 1 months warranty.

Suitable for

  • Power supplies and chargers running on 220V
  • Industrial control boards and household appliances
  • Rectifying transformer output in linear circuits
  • Supply inputs on lighting and fan boards

Seller's description

قنطرة توحيد أحادية الطور موجة كاملة سطحية التركيب بتيار خرج 2A وفولتية عكسية قصوى 1000V. تحتوي على أربعة دايودات في حزمة DBS بأربعة أطراف مثنية للحام السطحي على اللوحة الإلكترونية. تُستعمل في مزودات الطاقة الصغيرة والشواحن ولوحات التحكم التي تعمل مباشرة على فولتية الشبكة، وهي الخيار الأعلى تياراً في هذه العائلة عندما لا تكفي قنطرة 1A أو 1.5A.

أبرز المزايا

  • تيار خرج 2A يمنح هامشاً أوسع في المزودات المحمّلة باستمرار
  • فولتية عكسية 1000V تتحمّل نبضات الشبكة والارتفاعات المفاجئة
  • أربعة دايودات متطابقة داخل حزمة واحدة تقلّل عدد نقاط اللحام
  • تيار اندفاع لحظي مرتفع يتحمّل شحن مكثف الترشيح عند التشغيل
  • حزمة DBS سطحية توفّر مساحة مقارنة بالقناطر ذات الأرجل
  • مدى حرارة عمل واسع حتى +150°C على وصلة السيليكون

الاستخدامات الشائعة

  • مزودات الطاقة والشواحن العاملة على 220V
  • لوحات التحكم الصناعية والأجهزة المنزلية
  • توحيد خرج المحوّلات في الدوائر الخطية
  • مداخل التغذية في لوحات الإنارة والمراوح

ملاحظة: ضع مقاومة NTC أو مقاومة تحديد صغيرة على الدخل إذا كان مكثف الترشيح كبيراً، فتيار الشحن اللحظي عند وصل الجهاز هو أكثر ما يقتل هذه القناطر مع تكرار التشغيل.

What's in the box

قنطرة توحيد DB207S سطحية التركيب واحدة.

Specifications

TypeSingle-phase full-wave bridge rectifier
Max output current2A
Max reverse voltage1000V (VRRM)
Max RMS input voltage700V
Forward voltage drop1.0V لكل عنصر عند 1A
Surge current60A (نصف دورة 8.3ms)
Number of diodes4 داخل حزمة واحدة
Terminals4 (AC, AC, +, -)
PackageDBS (SMD)
Operating temperature-55°C إلى +150°C
تيار التسرب العكسي5µA عند 25°C (نموذجي)
طريقة التبريدعبر أقدام اللحام ومساحة النحاس على اللوحة
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0087

Questions about قنطرة توحيد DB207S سطحية التركيب بتيار 2A وفولتية 1000V | DB207S SMD Bridge Rectifier 2A 1000V DBS Package

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
A maximum output current of 2A and a maximum reverse voltage of 1000V, according to the listing.
It is surface-mount (SMD) in a DBS package, with leads bent for surface soldering onto the board.
There are 4 terminals: AC, AC, + and -.
The listing advises an NTC resistor or a small limiting resistor on the input if the filter capacitor is large.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.