USB-C to TTL serial module
وحدة محوّل من USB Type-C إلى المنفذ التسلسلي TTL برقاقة CH340N | USB Type-C to TTL Serial Port Module (CH340N)
وحدة محوّل من USB Type-C إلى المنفذ التسلسلي TTL برقاقة CH340N | USB Type-C to TTL Serial Port Module (CH340N) — 3,800 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- USB Type-C port and CH340N chip
- 3.3 and 5 volt signal levels
- TX, RX, VCC and GND pins
- Supported on Windows, Linux and Mac
- New, with a 1-month warranty
Ask about stock or request a better price
Price
3,800IQDIts price has held at 4,750 IQD for the last 11 days.
About this item
CH340N USB Type-C to TTL serial module for uploading code to ESP8266 and ESP32 boards and reading debug messages, with 3.3 and 5 volt levels.
This is a converter module with a USB Type-C port and a CH340N chip that provides a TTL-level serial port for talking to microcontrollers and development boards. Its first use is uploading code to bare ESP8266, ESP32 and Arduino boards that have no built-in USB port, and its second is reading debug messages while developing a program.
The module provides TX, RX, VCC and GND pins, supports 3.3 and 5 volt signal levels, is powered from the USB port and is small. The Type-C port is modern and reversible, so the cable orientation does not matter. The CH340N chip is supported on Windows, Linux and Mac according to the listing.
An important caution: on Windows, install the CH340 driver before connecting, because without it the module appears as an unknown device and gives no COM port whatever cables and ports you try. Also make sure the signal level, 3.3 or 5 volts, is set to suit your board before connecting. The box contains one converter module, and the item is new according to the listing with a 1-month warranty.
Suitable for
- Uploading code to ESP8266 and ESP32
- Reading serial debug messages
- Programming bare microcontrollers
- Connecting to serial modules and sensors
Seller's description
وحدة محوّل بمنفذ USB Type-C ورقاقة CH340N تعطي منفذاً تسلسلياً بمستوى TTL للتواصل مع الميكروكونترولرات ولوحات التطوير. الاستعمال الأول لها هو رفع البرامج إلى لوحات ESP8266 وESP32 وArduino العارية التي لا تحتوي منفذ USB مدمجاً، والثاني هو قراءة رسائل التصحيح أثناء تطوير البرنامج.
أبرز المزايا
- منفذ Type-C حديث ومزدوج الاتجاه
- رقاقة CH340N مدعومة على ويندوز ولينكس وماك
- تعطي أطراف الإرسال والاستقبال والتغذية
- تدعم مستويات 3.3 و5 فولت
- أساسية لبرمجة لوحات ESP وArduino العارية
الاستخدامات الشائعة
- رفع البرامج إلى ESP8266 وESP32
- قراءة رسائل التصحيح التسلسلية
- برمجة الميكروكونترولرات العارية
- الاتصال بالوحدات التسلسلية والحساسات
ملاحظة: ثبّت تعريف CH340 قبل التوصيل على ويندوز؛ الوحدة تظهر كجهاز مجهول بلا تعريف ولا تُعطي أي منفذ COM مهما جربت من كيبلات ومنافذ.
What's in the box
وحدة محوّل CH340N من USB Type-C إلى TTL واحدة
Specifications
| Chip | CH340N |
|---|---|
| Type | محوّل USB إلى تسلسلي TTL |
| Port | USB Type-C |
| Signal levels | 3.3 و5 فولت |
| Pins | TX، RX، VCC، GND |
| Operating systems | ويندوز ولينكس وماك |
| التعريف | تعريف CH340 مطلوب على ويندوز |
| الاستعمال الأشهر | برمجة ESP8266 وESP32 |
| الحجم | صغير |
| التغذية | من منفذ USB |
| Category | Industrial, Commercial & Specialized Electronics |
| More categories | Embedded systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0837 |
