Touch switch module
وحدة مفتاح لمس سعوي DC 6–20V بتيار خرج 3A | Capacitive Touch Switch Sensor Module, DC 6-20V 3A
وحدة مفتاح لمس سعوي DC 6–20V بتيار خرج 3A | Capacitive Touch Switch Sensor Module, DC 6-20V 3A — 2,975 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Capacitive sensing with no moving parts
- 6V to 20V DC supply
- Output current up to 3A
- Latch or momentary mode, adjustable sensitivity
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,975IQDIts price has held at 3,500 IQD for the last 11 days.
About this item
Capacitive touch switch module with a 6V to 20V DC supply and up to 3A output, switchable between latch and momentary modes with adjustable sensitivity.
This is a touch-operated switch module that uses capacitive sensing instead of mechanical buttons, driving the load directly with up to 3A within a supply range of 6V to 20V DC. It has no moving parts, so it does not wear out like mechanical switches.
It can be set to work in latch mode, meaning one touch turns it on and the next turns it off, or in momentary mode, and its sensitivity can be adjusted to suit the thickness of the surface it is mounted behind. Quiescent current is low at around 6mA or less, and the board measures 24 x 32 x 1.6mm.
The compatible surfaces are glass, acrylic and plastic, not metal: sensing continues through a thin surface but does not work behind metal at all. For wiring, there are supply input terminals and load output terminals, and suitable loads are LED strips, fans and DC lamps. When driving a load near 3A, make sure the supply wire gauge is adequate.
The listing suggests it for switching LED lighting in furniture, mirrors and cabinets, control panels with touch buttons behind a glass or acrylic surface, and home automation projects. The item is new with a 1-month warranty, and the box holds one module.
Suitable for
- Switching LED lighting in furniture, mirrors and cabinets
- Touch-button control panels behind glass or acrylic
- Home automation projects
Seller's description
وحدة مفتاح تعمل باللمس تعتمد الاستشعار السعوي بدل الأزرار الميكانيكية، فتقود الحمل مباشرة بتيار يصل إلى 3A ضمن مدى تغذية من 6V إلى 20V DC. يمكن ضبطها لتعمل بنمط التثبيت latch أي تشغيل وإطفاء بلمستين، أو بنمط لحظي، كما تحتوي على إمكانية ضبط الحساسية لتناسب سماكة السطح الذي تُركَّب خلفه.
أبرز المزايا
- تيار خرج يصل إلى 3A يكفي لتشغيل شرائط LED ومراوح صغيرة مباشرة
- مدى تغذية واسع من 6V إلى 20V DC يشمل مصادر 12V الشائعة
- تيار سكون منخفض لا يتجاوز نحو 6mA
- نمط قابل للضبط بين التثبيت latch والتشغيل اللحظي
- لا تحتوي على أجزاء متحركة فلا تتآكل مثل المفاتيح الميكانيكية
الاستخدامات الشائعة
- تشغيل وإطفاء إنارة LED في الأثاث والمرايا والخزائن
- لوحات تحكم عصرية بأزرار لمس خلف سطح زجاجي أو أكريليك
- مشاريع الأتمتة المنزلية التي تحتاج مفتاحاً بلا فتحة ظاهرة
ملاحظة: يمكن تركيب اللوحة خلف سطح زجاجي أو أكريليكي رقيق ويستمر الاستشعار عبره، لكنه لا يعمل خلف المعدن إطلاقاً؛ وعند تشغيل حمل قريب من 3A تأكد من كفاية مقطع أسلاك التغذية.
What's in the box
وحدة مفتاح لمس سعوي واحدة
Specifications
| Operating voltage | 6V - 20V DC |
|---|---|
| Maximum output current | 3A |
| Quiescent current | نحو 6mA |
| Board dimensions | 24 x 32 x 1.6mm |
| Mode | قابل للضبط بين latch واللحظي |
| Compatible surfaces | زجاج وأكريليك وبلاستيك وليس المعدن |
| نوع الاستشعار | سعوي بدون أجزاء متحركة |
| الحساسية | قابلة للضبط حسب سماكة السطح |
| طريقة التوصيل | أطراف دخل تغذية وأطراف خرج للحمل |
| الأحمال المناسبة | شرائط LED ومراوح ومصابيح DC |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT modules and developer kits |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0553 |




