Ferrule crimping tool

زردية كبس أطراف الأسلاك (بوتليس) رباعية الفكوك من 0.25 إلى 6mm² لمقاسات 23-10AWG | Bootlace Ferrule Crimping Tool 0.25-6mm2, 23-10AWG, Four-Tube Jaw

⁨زردية كبس أطراف الأسلاك (بوتليس) رباعية الفكوك من 0.25 إلى 6mm² لمقاسات 23-10AWG | Bootlace Ferrule Crimping Tool 0.25-6mm2, 23-10AWG, Four-Tube Jaw⁩ — ⁨11,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Four-tube jaw with symmetrical square crimp
  • Cross-section range 0.25 to 6 mm²
  • Sizes 23AWG to 10AWG
  • Ratchet keeps jaw closed until crimp is complete
  • New, with a 1-month warranty
11,500IQDIn stock
1

Ask about stock or request a better price

Price

11,500IQD

Its price has held at 11,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Four-tube jaw crimping tool for bootlace ferrules covering 0.25 to 6 mm², suited to control panels and industrial electrical work.

This is a crimping tool made for the metal wire-end sleeves known as ferrules or bootlace ferrules. Its jaw is four-tube, meaning it presses the sleeve from every side and produces a symmetrical square crimp, a shape that helps the ferrule slide easily into screw terminals in distribution panels and breakers.

The tool covers wire cross-sections from 0.25 to 6 mm², which the listing matches to 23AWG through 10AWG, so a single tool serves a range of stranded copper wire sizes. A ratchet mechanism keeps the jaw from opening before the crimp is complete, so each crimp finishes properly, and the handles are coated with an anti-slip material that reduces effort during repeated work. The jaw is made of hardened steel.

Before buying, note that the tool only crimps ferrules and no ferrules are supplied: the box holds one crimping pliers without ferrule terminals. Match the ferrule size to the wire cross-section exactly: a ferrule larger than the wire gives a loose crimp that can heat up under load, while a smaller one can cut copper strands on insertion and weaken the joint. It suits preparing wire ends in control and distribution panels, connecting stranded wires to screw terminals, industrial electrical work and PLC cabinets, and preparing wiring harnesses for projects and equipment.

The item is new according to the listing, with a 1-month warranty.

Suitable for

  • Preparing wire ends in control and distribution panels
  • Connecting stranded wires to screw terminals
  • Industrial electrical work and PLC cabinets
  • Preparing wiring harnesses for projects and equipment

Seller's description

زردية كبس مخصصة لأطراف الأسلاك المعدنية (الفيرول أو البوتليس) بفكّ رباعي يعطي كبسة مربعة متناظرة من أربع جهات. تغطي مقاطع من 0.25mm² حتى 6mm² أي من 23AWG حتى 10AWG. الكبسة الرباعية أفضل من الكبسة السداسية أو المسطحة لأنها تضغط الطرف من كل الجهات فيدخل بسهولة في المشابك المسمارية.

أبرز المزايا

  • فكّ رباعي يعطي كبسة مربعة متناظرة ومحكمة
  • مدى واسع من 0.25mm² حتى 6mm² في أداة واحدة
  • آلية سقاطة تضمن اكتمال الكبسة قبل فتح الفك
  • تعطي وصلة موثوقة في مشابك اللوحات والقواطع
  • مقابض مريحة تقلل الجهد عند العمل المتكرر

الاستخدامات الشائعة

  • تجهيز أطراف الأسلاك في لوحات التحكم والتوزيع
  • توصيل الأسلاك المجدولة بمشابك مسمارية
  • أعمال الكهرباء الصناعية وخزائن PLC
  • تجهيز حزم أسلاك المشاريع والأجهزة

ملاحظة: اختر مقاس الفيرول المطابق لمقطع السلك تماماً؛ الفيرول الأكبر من السلك يعطي كبسة رخوة تسخن مع الحمل، والأصغر يقطع خيوط النحاس عند الإدخال ويضعف الوصلة.

What's in the box

زردية كبس فيرول واحدة (بدون أطراف فيرول)

Specifications

Cross-section range0.25 – 6 mm²
AWG sizes23AWG – 10AWG
Jaw typeرباعي الجهات (Four-Tube)
Crimp shapeمربعة متناظرة
Jaw materialفولاذ مقسّى
آلية العملسقاطة تمنع فتح الفك قبل اكتمال الكبس
الاستعمالكبس أطراف الفيرول/البوتليس
نوع الأسلاكأسلاك نحاسية مجدولة
المقابضمغلّفة بمادة مانعة للانزلاق
الاستعمال النموذجيلوحات التحكم والكهرباء الصناعية
CategoryTools, Soldering & Workshop Equipment
More categoriesCrimping & wire-preparation tools
ConditionNew
Warranty1-month warranty
SKUNTK-0863

Questions about زردية كبس أطراف الأسلاك (بوتليس) رباعية الفكوك من 0.25 إلى 6mm² لمقاسات 23-10AWG | Bootlace Ferrule Crimping Tool 0.25-6mm2, 23-10AWG, Four-Tube Jaw

It currently costs 11,500 IQD from Nanotik on SinaaStore (updated 16 November 2026).
No. The listing says the box contains one crimping tool without ferrule terminals, so you need to buy ferrules sized for your wire.
It covers cross-sections from 0.25 to 6 mm², and 23AWG to 10AWG in AWG terms, according to the listing.
The listing names stranded copper wire as the wire type. For any other type, ask the shop through chat.
The ratchet mechanism stops the jaw from opening before the crimp is complete, so each crimp finishes properly.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.