Bluetooth audio receiver module

وحدة استقبال صوت Bluetooth 5.0 تعمل بفولتية 3.3V–4.8V | Bluetooth 5.0 Stereo Audio Receiver Module 3.3V-4.8V

⁨وحدة استقبال صوت Bluetooth 5.0 تعمل بفولتية 3.3V–4.8V | Bluetooth 5.0 Stereo Audio Receiver Module 3.3V-4.8V⁩ — ⁨3,400 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Audio reception over Bluetooth 5.0
  • Analog stereo L/R output
  • 3.3V – 4.8V DC operating voltage
  • Works as soon as powered, no programming
  • Compact size with solder pads
3,400IQD4,250IQDخصم 20%In stock
1

Ask about stock or request a better price

Price

3,400IQD

Its price has held at 4,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

A small board that receives audio over Bluetooth 5.0 and outputs analog stereo, running on 3.3V-4.8V and suited to audio and speaker projects.

A small board that receives audio wirelessly over Bluetooth 5.0 and outputs it as an analog stereo (L/R) signal to connect to the input of an amplifier or an active speaker. That means it can turn an old wired sound setup into one that receives audio from a phone, a common use in handmade home speaker projects.

The operating voltage is 3.3V to 4.8V DC, so it can be powered directly from a single lithium cell or from a 3.3V regulator. It works as soon as it is powered, with no programming or extra app, and its low consumption suits battery operation. It is installed through solder pads on the board, and its compact size makes it easy to place inside a speaker enclosure or device.

An important warning: do not power the board from 12V directly, since the upper limit is 4.8V and a step-down regulator is needed before it. For clean sound the listing advises joining the power ground and signal ground at a single point only, to avoid ground-loop hum.

Uses named in the listing include converting a wired speaker or amplifier to wireless, portable handmade speaker projects, updating audio systems in cars and bikes, and a sound source for small class-D amplifiers such as the PAM8403. The box contains one Bluetooth 5.0 audio receiver board. It is listed as new with a 1 months warranty. The listing does not give the board dimensions in numbers or the connection range, so ask the shop through chat if they matter.

Suitable for

  • Converting a wired speaker or amplifier to wireless
  • Portable handmade speaker projects
  • Updating audio systems in cars and bikes
  • Sound source for small class-D amplifiers

Seller's description

لوحة صغيرة تستقبل الصوت لاسلكياً عبر Bluetooth 5.0 وتخرجه كإشارة تناظرية ستيريو تُوصل بمدخل مضخم الصوت أو السماعة النشطة. تعمل بفولتية تغذية من 3.3V إلى 4.8V، أي مباشرة من خلية ليثيوم واحدة أو من منظم 3.3V، دون حاجة إلى برمجة أو إعداد. تجعل أي منظومة صوت سلكية قديمة تستقبل من الهاتف، وهي الخيار الشائع في مشاريع السماعات المنزلية المصنوعة يدوياً.

أبرز المزايا

  • إصدار Bluetooth 5.0 بمدى وثبات اتصال أفضل من الإصدارات الأقدم
  • مدى تغذية 3.3V–4.8V يناسب خلية ليثيوم واحدة مباشرة
  • خرج صوت تناظري ستيريو يُوصل بأي مضخم أو سماعة نشطة
  • حجم صغير يسهل تركيبه داخل علبة السماعة أو الجهاز
  • يعمل فور التغذية دون برمجة أو تطبيق إضافي
  • استهلاك تيار منخفض يناسب التشغيل بالبطارية

الاستخدامات الشائعة

  • تحويل سماعة أو مضخم سلكي إلى نظام لاسلكي
  • مشاريع السماعات المحمولة المصنوعة يدوياً
  • تحديث أنظمة الصوت في السيارات والدراجات
  • مصدر صوت لمضخمات الصف D الصغيرة مثل PAM8403

ملاحظة: لا تغذِّ اللوحة بـ12V مباشرة؛ الحد الأعلى 4.8V ويلزم منظّم هابط قبلها. وللحصول على صوت نظيف افصل أرضي التغذية عن أرضي الإشارة عند نقطة واحدة فقط لتفادي طنين الحلقة الأرضية.

What's in the box

لوحة استقبال صوت Bluetooth 5.0 واحدة

Specifications

Module typeمستقبل صوت لاسلكي Bluetooth
Bluetooth versionBluetooth 5.0
Operating voltage3.3V – 4.8V DC
Suitable power sourceخلية ليثيوم واحدة أو منظّم 3.3V
Output typeصوت تناظري ستيريو (L/R)
Setupيعمل فور التغذية دون برمجة
عدد القنواتقناتان
التوصيل بالحملمدخل مضخم صوت أو سماعة نشطة
التركيبأطراف لحام على اللوحة، حجم مصغّر
الاستهلاكتيار منخفض يناسب التشغيل بالبطارية
CategoryAudio, Music & AV Equipment
More categoriesDACs & audio interfaces
ConditionNew
Warranty1-month warranty
SKUNTK-0271

Questions about وحدة استقبال صوت Bluetooth 5.0 تعمل بفولتية 3.3V–4.8V | Bluetooth 5.0 Stereo Audio Receiver Module 3.3V-4.8V

It currently costs 3,400 IQD (was 4,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
3.3V to 4.8V DC. Do not power it from 12V directly; a step-down regulator is needed.
An analog stereo (L/R) output that connects to an amplifier input or an active speaker.
No. According to the listing it works as soon as it is powered, with no programming.
The listing does not state the range, so ask the shop through chat.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.