Axial rectifier diode

دايود توحيد محوري بتيار 10A وفولتية 1000V | Axial Rectifier Diode 10A 1000V

⁨دايود توحيد محوري بتيار 10A وفولتية 1000V | Axial Rectifier Diode 10A 1000V⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Average forward current of 10A
  • Maximum reverse voltage of 1000V
  • Large axial package with thick leads
  • Band marks the cathode end
  • New, with a 1 months warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Axial silicon rectifier diode with a 10A average forward current and 1000V reverse voltage, for linear power supplies and battery chargers.

This is a general-purpose silicon rectifier diode with a 10A average forward current and a 1000V maximum reverse voltage, in a large axial package with thick leads (R-6 style). It is used in linear power supplies with large transformers and in battery charging circuits where the current of a 1N5408 is not enough. Its larger body and wider thermal area allow continuous operation under a high load.

The 1000V reverse voltage suits rectifying 220VAC directly, and the diode withstands a high momentary surge current when charging smoothing capacitors. The thick leads carry heat and reduce conduction resistance, and heat is dissipated through them into the board tracks. The forward voltage drop is about 1V at partial current and rises with load, and the operating temperature range is -55°C to +150°C typically. Its switching behaviour is slow reverse recovery, intended for 50/60Hz frequencies.

Listed uses include rectifier bridges in linear power supplies and welding transformers, high-current battery chargers, reverse-polarity protection on high-current lines, and inverter circuits and reverse-current blocking. The listing also points out it is a practical alternative to a ready-made bridge when building a bridge from separate diodes.

Near 10A the diode heats up noticeably, so leave its leads relatively long and fix them to wide copper tracks or metal terminals. The band marks the cathode, so check the direction before powering on. The listing does not state a specific model number, so ask the shop through chat if you are replacing a particular part. The part is new and comes as 1 axial 10A/1000V rectifier diode, with a 1 months warranty.

Suitable for

  • Rectifier bridges in linear supplies and welding transformers
  • High-current battery chargers
  • Reverse-polarity protection on high-current lines
  • Inverter circuits and reverse-current blocking

Seller's description

دايود توحيد سيليكوني للأغراض العامة بتيار أمامي متوسط 10A وفولتية عكسية قصوى 1000V، بحزمة محورية كبيرة بأسلاك سميكة. يستخدم في مزودات الطاقة الخطية ذات المحوّلات الكبيرة وفي دوائر شحن البطاريات حيث يكون تيار 1N5408 غير كافٍ. جسمه الأكبر ومساحته الحرارية الأوسع تسمح بتشغيل مستمر تحت حمل عالٍ.

أبرز المزايا

  • تيار أمامي متوسط 10A يغطي مزودات الطاقة الكبيرة
  • فولتية عكسية 1000V تناسب توحيد 220VAC مباشرة
  • يتحمل تيار اندفاع لحظي عالٍ عند شحن مكثفات التنعيم
  • أسلاك سميكة تنقل الحرارة وتقلل مقاومة التوصيل
  • بديل عملي عن جسر التوحيد الجاهز عند بناء جسر بأربعة دايودات

الاستخدامات الشائعة

  • جسور توحيد في مزودات الطاقة الخطية ومحولات اللحام
  • شواحن البطاريات ذات التيار العالي
  • حماية من عكس القطبية على خطوط تيار عالٍ
  • دوائر الإنفرترات ومنع رجوع التيار

ملاحظة: عند التشغيل قرب 10A يسخن الدايود بشكل ملحوظ، فاترك أسلاكه طويلة نسبياً وثبّتها على مسارات نحاس عريضة أو أطراف معدنية. الشريط يشير إلى الكاثود؛ تأكد من الاتجاه قبل التشغيل.

What's in the box

دايود توحيد محوري 10A/1000V واحد

Specifications

TypeStandard silicon rectifier
Max average forward current10A
Max reverse voltage1000V (VRRM)
Packageمحورية كبيرة بأسلاك سميكة (نمط R-6)
MountingTHT بأسلاك محورية
Switching characteristicsاسترجاع عكسي بطيء، لترددات 50/60Hz
Operating temperature-55°C إلى +150°C نمطياً
هبوط الفولتية الأمامينحو 1V عند التيار الجزئي ويرتفع مع الحمل
تيار الاندفاع اللحظيعالٍ، يناسب شحن مكثفات التنعيم
تصريف الحرارةعبر الأسلاك السميكة إلى مسارات اللوحة
تحديد القطبيةشريط عند طرف الكاثود
الاستخدام النموذجيجسر توحيد رباعي في مزودات الطاقة
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0349

Questions about دايود توحيد محوري بتيار 10A وفولتية 1000V | Axial Rectifier Diode 10A 1000V

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
An average forward current of 10A and a maximum reverse voltage of 1000V, according to the listing.
The band on the body marks the cathode end, according to the listing.
No, the listing describes slow reverse recovery intended for 50/60Hz frequencies.
Yes, the listing says it heats noticeably near 10A, so leave the leads relatively long and fix them to wide copper.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.