Development board

لوحة تطوير Arduino UNO R3 نسخة SMD بمنفذ USB Type-C | Arduino UNO R3 SMD Compatible Development Board with USB Type-C

⁨لوحة تطوير Arduino UNO R3 نسخة SMD بمنفذ USB Type-C | Arduino UNO R3 SMD Compatible Development Board with USB Type-C⁩ — ⁨7,650 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • ATmega328P SMD controller at 16MHz
  • USB Type-C port
  • 14 digital pins with 6 PWM and 6 ADC inputs
  • Standard UNO pin layout for shields
  • New, with a 1 months warranty
7,650IQD8,500IQDخصم 10%In stock
1

Ask about stock or request a better price

Price

7,650IQD

Its price has held at 8,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Arduino-compatible UNO R3 board in an SMD version with an ATmega328P controller and a USB Type-C port, accepting standard UNO shields.

This is an updated version of the UNO R3 board compatible with Arduino, with a surface-mount (SMD) ATmega328P controller and a USB Type-C port in place of the old Type-B connector, so it is programmed with the same cable used for a phone. The controller runs at 16MHz with 32KB Flash, 2KB SRAM and 1KB EEPROM.

It keeps the standard UNO pin layout, so it accepts shields designed for it. It has 14 digital pins, 6 with PWM output, and 6 ADC inputs at 10-bit resolution, with 5V logic, and supports UART, I2C and SPI. Power comes from USB or an external barrel jack with an on-board regulator, and programming is done from the Arduino IDE through a built-in serial converter.

Important note: the controller in the SMD version cannot be replaced, so if you damage a pin with excess voltage you lose the whole board; use protection resistors on inputs exposed to long wires and never exceed 5V on any pin. It suits education, student projects, controlling relays and motors, reading sensors, and building prototypes with network and display shields and small automation.

The product is new with a 1 months warranty, and the box holds one Arduino UNO R3 SMD board with a USB Type-C port. The listing describes it as Arduino-compatible, which is not necessarily the original Arduino board.

Suitable for

  • Education and student programming and circuit projects
  • Controlling relays and motors and reading sensors
  • Prototyping with network and display shields
  • Small automation systems at home and in the workshop

Seller's description

نسخة محدّثة من لوحة UNO R3 المتوافقة مع Arduino، بمتحكم ATmega328P ملحوم على السطح (SMD) ومنفذ USB Type-C بدل المنفذ المربّع القديم، فتُبرمج بالكيبل نفسه المستخدم مع الهاتف. تحافظ على ترتيب الأطراف القياسي فتقبل جميع الدروع (Shields) المصممة لـUNO، وتوفّر 14 طرفاً رقمياً منها 6 بخرج PWM و6 مداخل تناظرية بمنطق 5V.

أبرز المزايا

  • منفذ USB Type-C عملي وأمتن من منفذ Type-B القديم
  • متحكم ATmega328P بتردد 16MHz وذاكرة 32KB Flash
  • ترتيب أطراف UNO القياسي يقبل الدروع الجاهزة
  • 14 طرفاً رقمياً منها 6 بخرج PWM و6 مداخل ADC
  • نسخة SMD أنحف وأثبت من نسخة المتحكم القابل للنزع
  • تغذية من USB أو مقبس برميل خارجي مع منظّم داخلي

الاستخدامات الشائعة

  • التعليم ومشاريع الطلاب في البرمجة والدارات
  • التحكم بالريليهات والمحركات وقراءة الحساسات
  • بناء النماذج الأولية مع دروع الشبكة والشاشات
  • أنظمة الأتمتة الصغيرة في البيت والورشة

ملاحظة: المتحكم في نسخة SMD غير قابل للاستبدال، فإن أتلفت طرفاً بجهد زائد تخسر اللوحة كلها؛ استخدم مقاومة حماية على المداخل المعرّضة للأسلاك الطويلة ولا تتجاوز 5V على أي طرف.

What's in the box

لوحة Arduino UNO R3 SMD واحدة بمنفذ USB Type-C

Specifications

MicrocontrollerATmega328P (نسخة SMD)
Processor frequency16MHz
Memory32KB Flash / 2KB SRAM / 1KB EEPROM
Connection portUSB Type-C
Digital pins14 طرفاً منها 6 بخرج PWM
Analog inputs6 مداخل ADC بدقة 10-bit
Logic voltage5V
Mechanical compatibilityترتيب أطراف UNO القياسي للدروع
Supported interfacesUART و I2C و SPI
التغذية الخارجيةمقبس برميل مع منظّم على اللوحة
بيئة البرمجةArduino IDE عبر محوّل تسلسلي مدمج
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0417

Questions about لوحة تطوير Arduino UNO R3 نسخة SMD بمنفذ USB Type-C | Arduino UNO R3 SMD Compatible Development Board with USB Type-C

It currently costs 7,650 IQD (was 8,500 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
USB Type-C instead of the old Type-B port, so it is programmed with the same cable used for a phone, according to the listing.
Yes, it keeps the standard UNO pin layout, so it accepts shields designed for UNO.
No. The listing says the controller in the SMD version is not replaceable.
The listing describes it as Arduino-compatible and does not say it is original.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.