Development board

لوحة تطوير Arduino Nano V3.0 بمتحكم ATmega328P ومنفذ USB Type-C | Arduino Nano V3.0 Compatible Board ATmega328P 16MHz with USB Type-C

⁨لوحة تطوير Arduino Nano V3.0 بمتحكم ATmega328P ومنفذ USB Type-C | Arduino Nano V3.0 Compatible Board ATmega328P 16MHz with USB Type-C⁩ — ⁨7,200 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • ATmega328P controller at 16MHz
  • USB Type-C port for programming and power
  • 14 digital pins and 8 analog inputs
  • Programmed from the Arduino IDE
  • New, with a 1-month warranty
7,200IQD8,000IQDخصم 10%In stock
1

Ask about stock or request a better price

Price

7,200IQD

Its price has held at 8,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Compact Arduino Nano V3.0 compatible board with an ATmega328P controller and a USB Type-C port, for breadboards or soldering into a project.

This is a compact development board compatible with the Arduino Nano V3.0, built around an ATmega328P controller running at 16MHz. The stated memory is 32KB Flash with 2KB SRAM and 1KB EEPROM, and it uses 5V logic. The listing calls it compatible and does not say it is made by the original maker.

It connects to a computer through a USB Type-C port for programming and power, which the listing describes as newer and sturdier than the old Mini-USB. It offers 14 digital pins of which 6 have PWM output, 8 analog ADC inputs with 10-bit resolution, and supports UART, I2C and SPI interfaces for connecting modules. It is programmed from the Arduino IDE without an external programmer.

Its small size lets you mount it directly on a breadboard thanks to the header pins, or solder it into the final project. This suits small projects that cannot fit a UNO board, sensor-reading systems, relay control, student projects and prototypes.

An important note from the listing: the pins use 5V logic, so use a voltage divider or level shifter when connecting to 3.3V modules such as some sensors and SD modules, and do not draw more than 40mA from a single pin. The item is new with a 1-month warranty, and the box holds one board.

Suitable for

  • Small projects too tight for a UNO board
  • Reading sensors and controlling relays
  • Student projects and prototypes

Seller's description

لوحة تطوير مصغّرة متوافقة مع Arduino Nano V3.0 مبنية على متحكم ATmega328P بتردد 16MHz وذاكرة برنامج فلاش بسعة 32KB وذاكرة SRAM بسعة 2KB. توفّر 14 طرفاً رقمياً منها 6 تدعم PWM إضافة إلى 8 مداخل تناظرية، وتعمل بمنطق 5V. تتصل بالحاسوب عبر منفذ USB Type-C للبرمجة والتغذية، وحجمها الصغير يسمح بتركيبها مباشرة على لوحة التجارب أو لحامها داخل المشروع النهائي.

أبرز المزايا

  • متحكم ATmega328P بتردد 16MHz وذاكرة 32KB Flash
  • منفذ USB Type-C أحدث وأمتن من Mini-USB القديم
  • 14 طرفاً رقمياً منها 6 بخرج PWM و8 مداخل تناظرية
  • أبعاد صغيرة تسمح بالتركيب مباشرة على لوحة التجارب
  • تدعم واجهات UART و I2C و SPI للتوصيل بالوحدات
  • تُبرمج من Arduino IDE دون مبرمجة خارجية

الاستخدامات الشائعة

  • المشاريع الصغيرة التي لا تتسع للوحة UNO
  • أنظمة القراءة من الحساسات والتحكم بالريليهات
  • مشاريع الطلاب والنماذج الأولية
  • دمجها داخل الأجهزة المصنوعة يدوياً بعد اللحام

ملاحظة: الأطراف تعمل بمنطق 5V فاستخدم مقسّم جهد أو محوّل مستوى عند التوصيل بوحدات 3.3V مثل بعض الحساسات ووحدات SD، ولا تسحب أكثر من 40mA من الطرف الواحد.

What's in the box

لوحة تطوير Arduino Nano V3.0 واحدة

Specifications

MicrocontrollerATmega328P
Clock speed16MHz
Memory32KB Flash / 2KB SRAM / 1KB EEPROM
Digital pins14 طرفاً منها 6 بخرج PWM
Analog inputs8 مداخل ADC بدقة 10-bit
Logic voltage5V
PortUSB Type-C
الواجهات المدعومةUART و I2C و SPI
بيئة البرمجةArduino IDE دون مبرمجة خارجية
التركيبأرجل هيدر تناسب لوحة التجارب واللحام المباشر
الحد الأقصى لتيار الطرفنحو 40mA لكل طرف
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0055

Questions about لوحة تطوير Arduino Nano V3.0 بمتحكم ATmega328P ومنفذ USB Type-C | Arduino Nano V3.0 Compatible Board ATmega328P 16MHz with USB Type-C

It currently costs 7,200 IQD (was 8,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
A USB Type-C port for programming and power, according to the listing.
Yes, the listing says it is programmed from the Arduino IDE without an external programmer.
Its pins use 5V logic, so the listing advises a voltage divider or level shifter when connecting 3.3V modules.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.