ArduinoArduino Nano board
لوحة تطوير Arduino Nano V3.0 بمتحكم ATmega328P مع كيبل USB | Arduino Nano V3.0 ATmega328P Development Board with USB Cable
لوحة تطوير Arduino Nano V3.0 بمتحكم ATmega328P مع كيبل USB | Arduino Nano V3.0 ATmega328P Development Board with USB Cable — 7,650 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- ATmega328P in a compact 45 x 18 mm size
- 14 digital ports and 8 analog inputs
- Mini-USB port with a CH340 chip
- Plugs straight into a breadboard
- USB cable included, 1 months warranty
Ask about stock or request a better price
Price
7,650IQDIts price has held at 8,500 IQD for the last 11 days.
About this item
Arduino Nano V3.0 board with an ATmega328P controller and a USB cable, a compact UNO-style board that plugs into a breadboard.
The Arduino Nano V3.0 is a board built on the ATmega328P controller, the compact version of the UNO with roughly the same capabilities according to the listing, but small enough to plug straight into a breadboard or be soldered inside the finished device. Approximate dimensions are 45 x 18 mm.
It has 14 digital ports, 6 of them PWM, 8 analog inputs at 10-bit resolution, and a Mini-USB port with a CH340 chip for programming and power with no external programmer. Program Flash is 32KB, SRAM is 2KB, EEPROM is 1KB, the clock is 16MHz, and the voltage is 5V logic with 7-12V external power.
The listing notes that common versions use the CH340 USB chip and need a driver on Windows before the port appears in the Arduino IDE, so if the board does not show in the port list the cause is usually the driver rather than a fault. It suits small measurement and control projects, alarm and home sensor systems, small robots and learning embedded programming. The item is new with a 1 months warranty, and the box holds one board with a USB cable.
Suitable for
- Small measurement and control projects
- Alarm and home sensor systems
- Small robots and hobby projects
- Learning embedded programming
Seller's description
لوحة Arduino Nano V3.0 المبنية على متحكم ATmega328P، وهي النسخة المصغّرة من لوحة UNO بنفس الإمكانيات تقريباً لكن بحجم يسمح بتركيبها مباشرة على لوحة التجارب أو لحامها داخل الجهاز النهائي. تحتوي 14 منفذاً رقمياً و8 مداخل تناظرية ومنفذ USB مدمج للبرمجة والتغذية.
أبرز المزايا
- حجم صغير يركّب مباشرة على لوحة التجارب
- نفس متحكم UNO تقريباً مع توافق كامل مع مكتباته
- 14 منفذاً رقمياً و8 مداخل تناظرية
- منفذ USB مدمج للبرمجة والتغذية بلا مبرمجة خارجية
- ثمن منخفض يسمح بتضمينها في المشروع النهائي
الاستخدامات الشائعة
- مشاريع القياس والتحكم الصغيرة
- أنظمة إنذار وحساسات منزلية
- الروبوتات الصغيرة ومشاريع الهواة
- التعلّم والتدريب على البرمجة المدمجة
ملاحظة: النسخ الشائعة تستعمل شريحة USB من نوع CH340 وتحتاج تعريفاً على الويندوز قبل أن يظهر المنفذ في Arduino IDE؛ إن لم تظهر اللوحة في قائمة المنافذ فالسبب غالباً التعريف وليس عطلاً في اللوحة.
What's in the box
لوحة Arduino Nano V3.0 واحدة مع كيبل USB
Specifications
| Brand | Arduino |
|---|---|
| Controller | ATmega328P |
| Digital ports | 14 منفذاً (6 منها PWM) |
| Analog inputs | 8 مداخل بدقة 10 بت |
| Program memory | Flash: 32KB |
| SRAM | 2KB |
| EEPROM | 1KB |
| Clock speed | 16MHz |
| Operating voltage | 5V منطقياً، تغذية خارجية 7-12V |
| USB port | Mini-USB مع شريحة CH340 |
| Approximate dimensions | 45 x 18 mm |
| ذاكرة البرنامج Flash | 32KB |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT modules and developer kits |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0674 |




