GenericHeat shrink tubing

أنبوب انكماش حراري φ 18.0 30.1mm 2-1 1kv | Heat Shrink Tubing

⁨أنبوب انكماش حراري φ 18.0 30.1mm 2-1 1kv | Heat Shrink Tubing⁩ — ⁨2,100 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Nominal diameter 18.0mm
  • Shrinks to 30.1mm
  • 2:1 shrink ratio
  • Rated 1 kilovolt
  • New, with a 1-month warranty
2,100IQD3,000IQDعرضIn stock

ColorBlack

1

Ask about stock or request a better price

Price

2,100IQD

Its price has held at 3,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

Insulating heat shrink tubing, 18.0mm in diameter shrinking to 30.1mm at 2:1, rated 1 kilovolt, in black, red, yellow and blue.

An insulating heat shrink tube with an 18.0mm diameter and shrinkage up to 30.1mm at a 2:1 ratio, suited to varied electrical applications at up to 1 kilovolt. The listing describes it as useful for electricians and hobbyists looking for a practical insulation solution.

When buying, match the diameter to the size of the cables you use; according to the listing the tube gives a tight cover that stops moisture getting in and prevents short circuits. It comes in these colours: black, red, yellow and blue.

To fit it, cut the tube to the length you need and slide it over the wire, then heat it evenly with a heat gun from the centre toward the ends until it shrinks completely. Make sure there are no sharp edges that could puncture the tube, and switch off the electrical power while working.

The product is new and contains one piece of φ 18.0 30.1mm 2-1 Heat Shrink Insulation Sleeving 1kv, with a 1-month warranty against manufacturing operating defects, excluding misuse.

Suitable for

  • Insulating electrical joints
  • Preventing short circuits and moisture ingress
  • Technician and hobbyist work

Seller's description

أنبوب انكماش حراري عازل بقطر 18.0 ملم

يعد أنبوب الانكماش الحراري هذا أداة أساسية لأي فني كهرباء أو هاوٍ يبحث عن حلول عزل احترافية. تم تصميم هذا الأنبوب ليتحمل جهداً كهربائياً يصل إلى 1 كيلوفولت، مما يجعله مناسباً لمجموعة واسعة من التطبيقات الكهربائية التي تتطلب حماية عالية ضد العوامل البيئية والكهربائية. بفضل متانته، يضمن الأنبوب بقاء التوصيلات محمية لفترات طويلة.

يتميز الأنبوب بقطر 18.0 ملم وقدرة انكماش تصل إلى 30.1 ملم، مع نسبة انكماش 2:1، مما يجعله مرناً جداً في الاستخدام. عند اختيار هذا المنتج، تأكد من مطابقة القطر مع حجم الكابلات المستخدمة لضمان الحصول على أفضل نتيجة عزل ممكنة، حيث يوفر الأنبوب تغطية محكمة تمنع تسرب الرطوبة أو حدوث تماس كهربائي.

إرشادات التركيب والتعامل

لتركيب الأنبوب، قم بقصه بالطول المطلوب ثم مرره فوق السلك. استخدم مسدساً حرارياً لتسخين الأنبوب بانتظام من المركز نحو الأطراف حتى ينكمش بالكامل. تأكد من عدم وجود حواف حادة قد تثقب الأنبوب أثناء التركيب. يجب دائماً إجراء عمليات العزل في ظروف آمنة مع فصل التيار الكهربائي لضمان عدم حدوث أي حوادث كهربائية أثناء العمل.

  • القطر الاسمي: 18.0 ملم
  • قطر الانكماش: 30.1 ملم
  • نسبة الانكماش: 2:1
  • الجهد الكهربائي: 1 كيلوفولت
  • الألوان المتاحة: الأسود، الأحمر، الأصفر، الأزرق

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من φ 18.0 30.1mm 2-1 Heat Shrink Insulation Sleeving 1kv.

Specifications

BrandGeneric
Part nameφ 18.0 30.1mm 2-1 Heat Shrink Insulation Sleeving 1kv
Nominal diameter18.0 ملم
Shrunk diameter30.1 ملم
Shrink ratio2:1
Voltage1 كيلوفولت
ColoursBlack، Red، Yellow، Blue
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategoryElectronic Materials, Adhesives & Consumables
More categoriesHeat-shrink tubing & sleeving
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-XECBD308015C

Questions about أنبوب انكماش حراري φ 18.0 30.1mm 2-1 1kv | Heat Shrink Tubing

It currently costs 2,100 IQD (was 3,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The shrunk diameter is 30.1mm, from a nominal 18.0mm.
Black, red, yellow and blue.
With a heat gun, evenly from the centre toward the ends, until it shrinks fully.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.