GenericHeat shrink tubing
أنبوب انكماش حراري φ 10.0 17.06mm 2-1 1kv | Heat Shrink Tubing
أنبوب انكماش حراري φ 10.0 17.06mm 2-1 1kv | Heat Shrink Tubing — 1,750 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Nominal size φ 10.0mm
- 17.06mm after shrinking
- 2:1 shrink ratio
- Electrical insulation up to 1kv
- New, with a 1-month warranty
ColorBlack
Ask about stock or request a better price
Price
1,750IQDIts price has held at 2,500 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
Insulating heat shrink tubing, 10.0mm in diameter shrinking to 17.06mm at 2:1 with insulation up to 1kv, for technicians and electronics hobbyists.
A heat shrink tube with a 10.0mm diameter. The listing describes it as an essential tool for electricians and electronics hobbyists, offering electrical insulation up to 1kv and protecting wires from mechanical damage and moisture.
The shrink ratio is 2:1, so the tube reaches 17.06mm after shrinking and holds firmly around cables. Choosing the right size matters: measure your cable and compare it with the diameter before and after shrinking to get full insulation that extends the life of the connections and protects them from wear. The colours are black, red, yellow and blue.
To fit it, cut the tube to a suitable length and make sure the joint area is fully covered, then use a heat gun, moving it slowly around the tube so it shrinks evenly without burning the material. Let the tube cool fully before touching it or moving the joint.
The product is new, with one piece of φ 10.0 17.06mm 2-1 Heat Shrink Insulation Sleeving 1kv, and a 1-month warranty against manufacturing operating defects, excluding misuse.
Suitable for
- Insulating thin wires in electronics projects
- Protecting wires from mechanical damage and moisture
- Electrician and hobbyist work
Seller's description
أنبوب انكماش حراري عازل بقطر 10.0 ملم
يعد أنبوب الانكماش الحراري بقطر 10.0 ملم أداة أساسية لأي فني كهرباء أو هاوٍ في مجال الإلكترونيات، حيث يوفر عزلاً كهربائياً آمناً يصل إلى 1kv. هذا الأنبوب مصمم ليتحمل الظروف التشغيلية المختلفة ويحمي الأسلاك من التلف الميكانيكي والرطوبة.
بفضل نسبة الانكماش التي تبلغ 2:1، يضمن الأنبوب ثباتاً ممتازاً حول الكابلات، حيث يصل قطره إلى 17.06 ملم بعد الانكماش. من الضروري اختيار المقاس الصحيح الذي يتناسب مع قطر الكابل لضمان الحصول على أفضل نتيجة عزل ممكنة، مما يطيل من عمر التوصيلات الكهربائية ويحميها من التآكل.
لضمان تركيب آمن، قم بقص الأنبوب بالطول المناسب وتأكد من تغطية منطقة الوصلة بالكامل. استخدم مسدساً حرارياً وقم بتحريكه ببطء حول الأنبوب لضمان انكماشه بشكل متساوٍ دون حرق المادة. تأكد من أن الأنبوب قد برد تماماً قبل لمسه أو تحريك الوصلة لضمان ثبات العزل.
المواصفات الفنية للأنبوب
- الحجم الاسمي: φ 10.0 ملم
- القطر بعد الانكماش: 17.06 ملم
- نسبة الانكماش: 2:1
- الجهد الكهربائي: 1kv
- الألوان المتاحة: الأسود، الأحمر، الأصفر، الأزرق
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من φ 10.0 17.06mm 2-1 Heat Shrink Insulation Sleeving 1kv.
Specifications
| Brand | Generic |
|---|---|
| Part name | φ 10.0 17.06mm 2-1 Heat Shrink Insulation Sleeving 1kv |
| Nominal size | φ 10.0 ملم |
| Diameter after shrinking | 17.06 ملم |
| Shrink ratio | 2:1 |
| Voltage | 1kv |
| Colours | Black، Red، Yellow، Blue |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Electronic Materials, Adhesives & Consumables |
| More categories | Heat-shrink tubing & sleeving |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-X790495DAF36 |




