AMSVoltage regulator IC
منظم فولتية AMS1117-3.3 خرج 3.3V بتيار 1A حزمة SOT-223 | AMS1117-3.3 Fixed LDO Voltage Regulator 3.3V 1A SOT-223
منظم فولتية AMS1117-3.3 خرج 3.3V بتيار 1A حزمة SOT-223 | AMS1117-3.3 Fixed LDO Voltage Regulator 3.3V 1A SOT-223 — 1,925 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Fixed 3.3V output, about ±1% accuracy
- Output current up to 1A
- Input range 4.75V - 15V
- Surface-mount SOT-223 package
- New, with a 1-month warranty
Ask about stock or request a better price
Price
1,925IQDIts price has held at 2,750 IQD for the last 11 days.
About this item
AMS1117-3.3 fixed LDO linear voltage regulator with 3.3V output up to 1A in an SOT-223 package, for powering ESP modules and sensors.
The AMS1117-3.3 is a fixed LDO linear voltage regulator that gives a steady 3.3V output at up to 1A, in a surface-mount SOT-223 (SMD) package. The listing says it is widely used to power ESP8266 and ESP32 modules and sensors that run on 3.3V, with an output accuracy of about ±1% and no external adjustment resistors.
The stated input range is 4.75V to 15V and the dropout is 1.3V at 1A, so it can be fed from 5V directly. An output capacitor of 10µF or more is required for stability, and it has internal current limiting and thermal shutdown. Its metal tab dissipates heat through a copper area soldered on the board, and the cooling tab is connected to the output.
Mind the heat: when fed from 12V to draw 500mA, about 4.4W turns into heat and the thermal protection trips, so if you need a clean output from a higher source, use a switching step-down converter to 5V first and then this regulator. Being linear, its output noise is low compared with switching step-down converters.
The uses listed are powering ESP8266, ESP32 and nRF modules from a 5V source, sensor boards and modules that run on 3.3V, USB-to-serial adapters and programming boards, and repairing development boards by replacing a burnt regulator. The item is new, the box holds one surface-mount regulator in an SOT-223 package, and the warranty is 1 month.
Suitable for
- Powering ESP8266 and ESP32 modules from 5V
- Sensor boards running on 3.3V
- Repairing development boards and replacing a burnt regulator
Seller's description
منظم فولتية خطي من نوع LDO يعطي خرجاً ثابتاً 3.3V بتيار يصل إلى 1A، وهو المنظّم الأكثر استعمالاً لتغذية وحدات ESP8266 و ESP32 والحساسات العاملة على 3.3V. هبوط الفولتية 1.3V عند التيار الكامل وفولتية الدخل القصوى 15V، ويلزم مكثف خرج 10µF أو أكثر للاستقرار. الحزمة SOT-223 تبدّد الحرارة عبر لسانها المعدني الملحوم على نحاس اللوحة.
أبرز المزايا
- خرج ثابت 3.3V بدقة نحو ±1% دون مقاومات ضبط
- تيار 1A يستوعب نبضات إرسال WiFi في وحدات ESP
- هبوط فولتية 1.3V يسمح بالتغذية من 5V مباشرة
- حمايات داخلية لتحديد التيار والإطفاء الحراري
- الحزمة الأشهر في اللوحات التطويرية فيسهل استبدالها عند العطل
- ضجيج خرج منخفض مقارنة بمحوّلات الخفض التبديلية
الاستخدامات الشائعة
- تغذية وحدات ESP8266 و ESP32 و nRF من مصدر 5V
- لوحات الحساسات والوحدات العاملة على 3.3V
- محوّلات USB إلى تسلسلي ولوحات البرمجة
- إصلاح اللوحات التطويرية واستبدال المنظّم المحترق
ملاحظة: عند التغذية من 12V لسحب 500mA تتحول نحو 4.4W إلى حرارة وتقفل الحماية الحرارية؛ استعمل محوّل خفض تبديلي أولاً إلى 5V ثم هذا المنظّم إذا كنت تحتاج خرجاً نظيفاً.
What's in the box
منظم فولتية AMS1117-3.3 سطحي التركيب واحد بحزمة SOT-223.
Specifications
| Brand | AMS |
|---|---|
| Type | LDO linear regulator |
| Output voltage | 3.3V (ثابتة) |
| Maximum output current | 1A |
| Input voltage range | 4.75V - 15V |
| Package | SOT-223 (SMD) |
| دقة الخرج | نحو ±1% |
| هبوط الفولتية | 1.3V عند 1A |
| مكثف الخرج المطلوب | 10µF أو أكثر للاستقرار |
| الحمايات | تحديد التيار وإطفاء حراري |
| عدد الأطراف | 3 مع لسان تبريد متصل بالخرج |
| طريقة التبريد | لسان معدني على مساحة نحاسية |
| الاستخدام النموذجي | تغذية وحدات ESP والحساسات على 3.3V |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Integrated circuits |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0190 |




