DC-DC buck converter

محوّل خافض للفولتية DC-DC قابل للضبط بتيار 3A | Adjustable DC-DC Step-Down Buck Converter Module 3A

⁨محوّل خافض للفولتية DC-DC قابل للضبط بتيار 3A | Adjustable DC-DC Step-Down Buck Converter Module 3A⁩ — ⁨3,400 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Output current up to 3A
  • Output voltage adjustable with a trimmer
  • Higher efficiency than series linear regulators
  • No reverse-polarity protection
  • New, with a 1 months warranty
3,400IQD4,000IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

3,400IQD

Its price has held at 4,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DC-DC Buck step-down module with an adjustable output and up to 3A of current, for powering development boards and LED strips from a 12V source or a battery.

This is a DC-DC step-down converter module of the Buck type. It gives an adjustable output through a precision trimmer on the board, with a maximum output current of 3A. Because it works by fast switching instead of turning the difference into heat, its efficiency is much higher than series linear regulators such as the 7805, and it runs cooler, so it does not need a large heatsink for medium loads.

It suits powering 5V and 3.3V circuits from 12V sources or batteries. Uses include feeding Arduino and ESP32 boards from a battery or a 12V source, running LED strips and small motors at a set voltage, solar projects and portable systems, and replacing 7805 regulators in higher-consumption circuits. The connection points IN+ / IN- and OUT+ / OUT- are clearly marked, and it works on DC only.

Points to watch: the circuit only steps down, so the input voltage must be higher than the output you want by at least about 2V for stable regulation. Set the output voltage and measure it with a meter before connecting any load. The board does not protect against reversed polarity, so check polarity before powering up.

The module is new according to the listing with a 1 months warranty and comes as one unit. The listing does not state the maximum input voltage or the board dimensions, so ask the shop through chat if you need them.

Suitable for

  • Powering Arduino and ESP32 boards from a battery or a 12V source
  • Running LED strips and small motors at a set voltage
  • Solar projects and portable systems

Seller's description

وحدة تحويل DC-DC خافضة للفولتية من نوع Buck تعطي خرجاً قابلاً للضبط عبر مقاومة متغيرة دقيقة على اللوحة، بتيار خرج يصل إلى 3A. يجب أن تكون فولتية الدخل أعلى من فولتية الخرج المطلوبة لأن الدائرة خافضة فقط. كفاءتها أعلى بكثير من منظّمات السلسلة الخطية مثل 7805 لأنها تعمل بالتبديل السريع بدل تحويل الفرق إلى حرارة.

أبرز المزايا

  • تيار خرج يصل إلى 3A بحجم لوحة صغير
  • فولتية خرج قابلة للضبط بمقاومة متغيرة دقيقة
  • كفاءة تحويل أعلى بكثير من منظّمات السلسلة الخطية
  • حرارة أقل فلا يحتاج مبدّداً كبيراً في الأحمال المتوسطة
  • نقاط توصيل واضحة IN+ / IN- و OUT+ / OUT-
  • يناسب تغذية دوائر 5V و3.3V من مصادر 12V أو بطاريات

الاستخدامات الشائعة

  • تغذية لوحات Arduino وESP32 من بطارية أو مصدر 12V
  • تشغيل شرائط LED ومحركات صغيرة بفولتية مضبوطة
  • مشاريع الطاقة الشمسية والأنظمة المحمولة
  • استبدال منظّمات 7805 في الدوائر ذات الاستهلاك الأعلى

ملاحظة: اضبط فولتية الخرج وقِسها بمقياس قبل توصيل أي حمل، وأبقِ فرقاً لا يقل عن 2V بين الدخل والخرج ليعمل التنظيم بثبات. اللوحة لا تحمي من عكس القطبية فتحقق منها قبل التشغيل.

What's in the box

وحدة محوّل خافض للفولتية DC-DC واحدة

Specifications

Converter typeخافض للفولتية (Step-Down / Buck)
Max output current3A
Output voltageقابلة للضبط
Adjustment methodمقاومة متغيرة دقيقة على اللوحة
Connection pointsIN+ / IN- و OUT+ / OUT-
فرق الدخل والخرج المطلوبلا يقل عن 2V تقريباً
الكفاءةأعلى بكثير من منظّمات السلسلة الخطية
نوع الدخل والخرجتيار مستمر DC فقط
الحماية من عكس القطبيةغير متوفرة؛ يجب مراعاة القطبية
التبريدلا يحتاج مبدّداً في الأحمال المتوسطة
الاستخدامتغذية لوحات التطوير وشرائط LED والمشاريع
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesInverters and converters
ConditionNew
Warranty1-month warranty
SKUNTK-0021

Questions about محوّل خافض للفولتية DC-DC قابل للضبط بتيار 3A | Adjustable DC-DC Step-Down Buck Converter Module 3A

It currently costs 3,400 IQD (was 4,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The listing mentions powering Arduino and ESP32 boards from a battery or a 12V source, setting and measuring the output before connecting the board.
No, the board does not protect against reversed polarity, so check polarity before powering up.
The input must be higher than the output by at least about 2V.
The listing does not specify the maximum input voltage, so ask the shop through chat before buying.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.