Adhesive battery insulation paper
ورق عزل لاصق لحزم بطاريات الليثيوم عرض 65mm وطول 4m | Adhesive Insulation Paper for Lithium Battery Packs 65mm x 4m
ورق عزل لاصق لحزم بطاريات الليثيوم عرض 65mm وطول 4m | Adhesive Insulation Paper for Lithium Battery Packs 65mm x 4m — 4,463 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 4 metres per roll
- 65mm width, close to an 18650 cell length
- Self-adhesive on one side
- Tear-resistant barley paper
- New, with 1 months warranty
Ask about stock or request a better price
Price
4,463IQDIts price has held at 5,250 IQD for the last 11 days.
About this item
A self-adhesive insulation paper roll (barley paper), 65mm wide and 4 metres long, enough for several 18650 packs in a workshop.
A roll of self-adhesive insulation paper, 4 metres long and 65mm wide, used when assembling lithium battery packs. The longer length suits workshops and anyone building several packs, covering the sides of multiple 18650 packs without needing a new roll. The 65mm width is close to the standard 18650 cell length.
It is stuck over terminals and nickel strips to prevent contact and cut with scissors to the size required. The paper is barley paper, insulating and resistant to tearing and abrasion, with a self-adhesive face on one side; listed compatibility is 18650, 21700 and 26650 cells. The listing advises storing the roll away from heat and moisture so the adhesive does not weaken, and cutting pieces a few millimetres larger than the area so terminal edges are fully covered. It is new with a 1 months warranty.
Suitable for
- Repeated production of 18650 and 21700 packs in workshops
- Insulating nickel strips and BMS boards inside packs
- Lining battery boxes and control boxes
Seller's description
لفة اقتصادية بطول 4 أمتار وعرض 65mm من ورق العزل اللاصق المستخدم في تجميع حزم بطاريات الليثيوم. الطول الأكبر يناسب الورش ومن يبني حزماً متعددة، فيغطي جوانب عدة حزم 18650 دون الحاجة لشراء لفة جديدة. يُلصق فوق الأقطاب وشرائط النيكل لمنع التماس، ويُقص بالمقص حسب المقاس المطلوب.
أبرز المزايا
- طول 4 أمتار في اللفة الواحدة يكفي لعدة حزم
- عرض 65mm يقارب طول خلية 18650 القياسي
- لاصق ذاتي على وجه واحد يثبت على المعدن والبلاستيك
- ورق barley paper عازل كهربائياً ومقاوم للتمزق
- كلفة المتر أقل مقارنة بلفة المتر الواحد
الاستخدامات الشائعة
- الإنتاج المتكرر لحزم 18650 و21700 في الورش
- عزل شرائط النيكل ولوحات BMS داخل الحزم
- تبطين علب البطاريات وصناديق التحكم
- إعادة تأهيل بطاريات الدراجات الكهربائية والعدد اليدوية
ملاحظة: خزّن اللفة بعيداً عن الحرارة والرطوبة حتى لا يضعف اللاصق، واقطع القطع بقياس أكبر بمليمترات قليلة من المساحة المطلوبة لضمان تغطية حواف الأقطاب كاملة.
What's in the box
لفة واحدة من ورق العزل اللاصق بعرض 65mm وطول 4 أمتار
Specifications
| Product type | ورق عزل لاصق لحزم البطاريات (barley paper) |
|---|---|
| Width | 65mm |
| Roll length | 4 أمتار |
| Adhesive face | لاصق ذاتي على وجه واحد |
| Compatibility | خلايا 18650 و21700 و26650 |
| الوظيفة الكهربائية | يمنع التماس بين الأقطاب وشرائط النيكل |
| الاستخدام الأمثل | الورش والإنتاج المتكرر للحزم |
| طريقة الاستخدام | يُقص ويُلصق يدوياً دون أدوات خاصة |
| المقاومة الميكانيكية | مقاوم للتمزق والاحتكاك داخل الحزمة |
| التخزين | يُحفظ بعيداً عن الحرارة والرطوبة للحفاظ على اللاصق |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Batteries and battery packs |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0461 |




