Adhesive battery insulation paper
ورق عزل لاصق لحزم بطاريات الليثيوم عرض 65mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 65mm x 1m
ورق عزل لاصق لحزم بطاريات الليثيوم عرض 65mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 65mm x 1m — 2,550 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 65mm width, close to an 18650 cell length
- 1 metre roll length
- Self-adhesive on one side
- Barley paper resistant to tearing and abrasion
- New, with 1 months warranty
Ask about stock or request a better price
Price
2,550IQDIts price has held at 3,000 IQD for the last 11 days.
About this item
Self-adhesive insulation paper (barley paper), 65mm wide and 1 metre long, for insulating terminals and nickel strips in 18650 and other cell packs.
A roll of self-adhesive insulation paper, 65mm wide and 1 metre long. The width is the closest to the standard 18650 cell length (65mm), so one piece can wrap a cell body or cover one side of a pack. It is stuck over nickel strips and terminals to prevent electrical contact inside the pack, and is also used to line battery boxes and insulate coils and transformers.
The paper is barley paper, insulating and resistant to tearing and abrasion, with a self-adhesive face on one side; it is cut by hand and applied without special tools. Listed compatibility is 18650 and 21700 cells and small LiFePO4 packs. When rebuilding an old pack, the listing advises replacing cracked or oil-soaked paper, which loses its insulating ability. It is new with a 1 months warranty, and the box holds one roll.
Suitable for
- Wrapping the sides of 18650 packs after nickel welding
- Insulating the BMS board and balance wires
- Lining battery boxes and project boxes
Seller's description
ورق عزل لاصق بعرض 65mm، وهو العرض الأقرب لطول خلية 18650 القياسي، ما يجعله مناسباً لتغليف جسم الخلية أو تغطية جانب الحزمة بالكامل بقطعة واحدة. يُلصق فوق شرائط النيكل والأقطاب لمنع التماس الكهربائي داخل الحزمة، ويُستخدم أيضاً في تبطين علب البطاريات. مادة ورقية معالجة تتحمل الاحتكاك ولا تتفتت عند القص.
أبرز المزايا
- عرض 65mm يقارب طول خلية 18650 لتغطية الجانب بقطعة واحدة
- طول اللفة 1 متر يكفي لعدة حزم صغيرة
- لاصق ذاتي على وجه واحد يثبت على المعدن والبلاستيك
- ورق barley paper عازل ومقاوم للتمزق والاحتكاك
- سهل القص والطي حول حواف الخلايا
الاستخدامات الشائعة
- تغليف جوانب حزم 18650 بعد لحام النيكل
- عزل لوحة الحماية BMS وأسلاك التوازن
- تبطين علب البطاريات وصناديق المشاريع
- إعادة عزل بطاريات العدد اليدوية عند الإصلاح
ملاحظة: عند إعادة بناء حزمة قديمة استبدل الورق التالف بالكامل؛ الورق المتشقق أو المشبع بالزيت يفقد قدرته على العزل ويترك مساراً محتملاً للتماس بين الخلايا.
What's in the box
لفة واحدة من ورق العزل اللاصق بعرض 65mm وطول 1 متر
Specifications
| Product type | ورق عزل لاصق لحزم البطاريات (barley paper) |
|---|---|
| Width | 65mm |
| Roll length | 1 متر |
| Adhesive face | لاصق ذاتي على وجه واحد |
| Compatibility | خلايا 18650 و21700 وحزم LiFePO4 الصغيرة |
| الميزة المميزة | العرض يقارب طول خلية 18650 (65mm) |
| الوظيفة الكهربائية | يمنع التماس بين الأقطاب وشرائط النيكل |
| طريقة الاستخدام | يُقص باليد ويُلصق دون أدوات خاصة |
| المقاومة الميكانيكية | مقاوم للتمزق والاحتكاك داخل الحزمة |
| استخدامات إضافية | تبطين العلب وعزل الملفات والمحولات |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Batteries and battery packs |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0260 |




