Adhesive battery insulation paper
ورق عزل لاصق لحزم بطاريات الليثيوم عرض 60mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 60mm x 1m
ورق عزل لاصق لحزم بطاريات الليثيوم عرض 60mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 60mm x 1m — 2,550 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 60mm width, 1 metre per roll
- Self-adhesive on one side
- Insulating, tear-resistant barley paper
- Suits one row of 18650 cells
- New, with 1 months warranty
Ask about stock or request a better price
Price
2,550IQDIts price has held at 3,000 IQD for the last 11 days.
About this item
Self-adhesive insulation paper (barley paper), 60mm wide and 1 metre long, for insulating cell terminals and nickel strips in lithium packs.
A roll of self-adhesive insulation paper, 60mm wide and 1 metre long, used when assembling lithium battery packs. It is stuck over cell terminals and nickel strips to prevent contact between positive and negative and between the pack and any neighbouring metal surface. The medium width suits one row of 18650 cells or covering the strip between groups, and wastes less than cutting down a wide roll.
The paper is barley paper, electrically insulating and tear-resistant, with a self-adhesive face on one side; it is cut with scissors or a utility knife without crumbling and folds around corners without cracking. The listing advises cleaning oil and dust off the cell surface before sticking, and notes its job is preventing mechanical contact inside the pack, not serving as the only insulation for high voltage. It is new with a 1 months warranty.
Suitable for
- Insulating cell terminals and nickel strips in 18650 packs
- Separating balance wires and the BMS board from the pack body
- Lining plastic and metal project boxes
Seller's description
لفة ورق عزل لاصق بعرض 60mm تُستخدم في تجميع حزم بطاريات الليثيوم، حيث تُلصق فوق أقطاب الخلايا وشرائط النيكل لمنع التماس بين الموجب والسالب وبين الحزمة وأي سطح معدني مجاور. العرض المتوسط يناسب صفاً واحداً من خلايا 18650 أو تغطية الشريط الفاصل بين المجموعات، ويقلل الهدر مقارنة بقص لفة عريضة.
أبرز المزايا
- عرض 60mm وطول 1 متر في اللفة الواحدة
- لاصق ذاتي على وجه واحد يثبت فوراً دون شريط إضافي
- ورق معالج من نوع barley paper عازل كهربائياً ومقاوم للتمزق
- عرض مناسب لصف خلايا واحد ولشرائح العزل الضيقة
- يُقص ويُطوى بسهولة حول زوايا الحزمة
الاستخدامات الشائعة
- عزل أقطاب الخلايا وشرائط النيكل في حزم 18650
- فصل الأسلاك المتوازنة ولوحة BMS عن جسم الحزمة
- تبطين العلب البلاستيكية والمعدنية للمشاريع
- عزل موضعي في إصلاح بطاريات الأجهزة اليدوية
ملاحظة: نظّف سطح الخلايا من الزيت والغبار قبل اللصق ليتماسك اللاصق جيداً، ولا تعتمد على هذا الورق كعزل وحيد لجهد مرتفع؛ وظيفته منع التماس الميكانيكي داخل الحزمة.
What's in the box
لفة واحدة من ورق العزل اللاصق بعرض 60mm وطول 1 متر
Specifications
| Product type | ورق عزل لاصق لحزم البطاريات (barley paper) |
|---|---|
| Width | 60mm |
| Roll length | 1 متر |
| Adhesive face | لاصق ذاتي على وجه واحد |
| Compatibility | خلايا 18650 و21700 والحزم الصغيرة |
| الوظيفة الكهربائية | يمنع التماس بين الأقطاب وشرائط النيكل |
| الاستخدام الأمثل | صف خلايا واحد أو شرائح عزل ضيقة |
| طريقة القص | بالمقص أو سكين القرطاسية دون تفتت |
| المرونة | يُطوى حول الزوايا والحواف دون تشقق |
| استخدامات إضافية | تبطين العلب وعزل الأسلاك الداخلية |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Batteries and battery packs |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0452 |




