Adhesive insulation paper

ورق عزل لاصق لحزم بطاريات الليثيوم عرض 120mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 120mm x 1m

⁨ورق عزل لاصق لحزم بطاريات الليثيوم عرض 120mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 120mm x 1m⁩ — ⁨3,188 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 120mm wide, 1 metre per roll
  • Self-adhesive on one side
  • Tear- and abrasion-resistant
  • Listed for 18650, 21700 and 26650 cells
  • New, with a 1 months warranty
3,188IQD3,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

3,188IQD

Its price has held at 3,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Roll of self-adhesive barley paper insulation, 120mm wide and 1 metre long, for insulating cell terminals and nickel strips in lithium battery packs.

A one-side self-adhesive insulation paper made for building lithium battery packs. It goes over cell terminals and nickel strips to prevent electrical contact between them and the pack body or a metal case. At 120mm wide it covers one face of a multi-row 18650 pack in a single piece instead of patching several strips.

The material is barley paper, which the listing describes as tear- and abrasion-resistant and able to wrap curved edges without cracking; it cuts with scissors or a knife. Listed compatibility covers 18650, 21700 and 26650 cells and flat packs, and it also serves for lining battery cases and insulating small coils and transformers. The box holds one roll 1 metre long, new, with a 1 months warranty. Apply it before heat-shrink wrapping, and make sure the ring around each cell's positive terminal is fully covered.

Suitable for

  • Insulating the faces of 18650 and 21700 packs after welding nickel strips
  • Separating the BMS protection board from the pack body
  • Lining battery cases and project boxes
  • Insulating small coils and transformers

Seller's description

ورق عزل لاصق مخصص لبناء حزم بطاريات الليثيوم، يُلصق فوق أقطاب الخلايا وشرائط النيكل ليمنع التماس الكهربائي بين الأقطاب وبين جسم الحزمة أو العلبة المعدنية. عرضه 120mm يكفي لتغطية وجه حزمة 18650 متعددة الصفوف بقطعة واحدة بدل ترقيع عدة شرائح، ووجهه اللاصق يثبته مباشرة دون شريط إضافي. يُقص بالمقص بسهولة ويلتف حول الحواف المنحنية دون تشقق.

أبرز المزايا

  • عرض 120mm وطول 1 متر في اللفة الواحدة
  • وجه لاصق ذاتي يثبت على البلاستيك والمعدن وأغلفة الخلايا
  • مادة ورقية معالجة من نوع barley paper عازلة كهربائياً ومقاومة للتمزق
  • مرن يلتف حول أطراف الخلايا والحواف دون أن ينكسر
  • يُقص بالمقص أو السكين حسب القياس المطلوب دون تفتت

الاستخدامات الشائعة

  • عزل وجهي حزم 18650 و21700 بعد لحام شرائط النيكل
  • فصل لوحة الحماية BMS عن جسم الحزمة
  • تبطين علب البطاريات وصناديق المشاريع من الداخل
  • عزل الملفات والمحولات الصغيرة وترميم عزل الأجهزة

ملاحظة: ضع الورق قبل تغليف الحزمة بالكم الحراري، وتأكد من تغطية الحلقة المحيطة بالقطب الموجب لكل خلية تماماً، فأي تماس مباشر بين شريط النيكل وجدار الخلية السالب يسبب قصراً خطيراً.

What's in the box

لفة واحدة من ورق العزل اللاصق بعرض 120mm وطول 1 متر

Specifications

Width120mm
Roll length1 متر
Adhesive sideلاصق ذاتي على وجه واحد
Compatibilityخلايا 18650 و21700 و26650 والحزم المسطحة
Materialbarley paper
نوع المنتجورق عزل لاصق لحزم البطاريات (barley paper)
الوظيفة الكهربائيةعازل يمنع التماس بين الأقطاب وشرائط النيكل
طريقة الاستخداميُقص ويُلصق يدوياً دون أدوات خاصة
المرونةيلتف حول الحواف المنحنية دون تشقق
المقاومة الميكانيكيةمقاوم للتمزق والاحتكاك داخل الحزمة
استخدامات إضافيةتبطين العلب وعزل الملفات والمحولات الصغيرة
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesBatteries and battery packs
ConditionNew
Warranty1-month warranty
SKUNTK-0321

Questions about ورق عزل لاصق لحزم بطاريات الليثيوم عرض 120mm وطول 1m | Adhesive Insulation Paper for Lithium Battery Packs 120mm x 1m

It currently costs 3,188 IQD (was 3,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The listing gives 120mm wide and 1 metre long.
Yes, the listing states compatibility with 18650, 21700 and 26650 cells and flat packs.
The listing says its adhesive face holds it directly without extra tape, and it cuts with scissors or a knife.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.