Active buzzer
بزّار إلكتروني فعّال DC 3-24V بتيار 12mA صوت مستمر | Active Electronic Buzzer 3-24V DC 12mA Continuous Tone
بزّار إلكتروني فعّال DC 3-24V بتيار 12mA صوت مستمر | Active Electronic Buzzer 3-24V DC 12mA Continuous Tone — 2,275 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Operates from 3V to 24V DC
- Draws only about 12mA
- Continuous tone from a built-in oscillator
- Driven by an NPN transistor or relay output
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,275IQDIts price has held at 3,250 IQD for the last 11 days.
About this item
Active electronic buzzer running on 3V to 24V DC and drawing about 12mA, giving a continuous tone as soon as voltage is applied.
This is an active electronic buzzer with a built-in oscillator circuit. It runs from 3V up to 24V DC and draws only about 12mA. As soon as voltage is applied it produces a continuous tone with no external signal or PWM needed, since it is driven by a steady DC voltage.
The wide voltage range means it works in 5V logic circuits and in 12V and 24V industrial panels without modification, and the low draw makes it possible to drive from an NPN transistor or a relay output. Loudness rises as the supply voltage increases. It has wire leads and can be fitted THT-style or inside the device enclosure; the body is sealed plastic.
It suits fault alerts in control panels, home alarm systems and motion detectors, Arduino and ESP32 projects that need an audible alert, and measuring instruments and industrial timers. The continuous tone is appropriate for alerts and alarms.
Observe polarity when wiring: there is a positive and a negative lead. Do not connect it straight to a 3.3V microcontroller pin if the required voltage is higher; use an NPN transistor with a suitable base resistor instead. The box contains an active buzzer. The condition is new and the warranty is 1 months.
Suitable for
- Fault alerts in control panels
- Home alarm systems and motion detectors
- Arduino and ESP32 projects needing an audible alert
- Measuring instruments and industrial timers
Seller's description
بزّار إلكتروني فعّال يعمل من 3V حتى 24V مستمر ويسحب نحو 12mA فقط، ويصدر نغمة متواصلة فور تطبيق الجهد بفضل دائرة التوليد المدمجة داخله. استهلاكه المنخفض يجعله قابلاً للقيادة من مخرج ترانزستور صغير أو مرحّل خفيف، ومدى فولتيته الواسع يعني أنه يعمل في دوائر 5V المنطقية وفي لوحات 12V و24V الصناعية دون تعديل.
أبرز المزايا
- مدى تشغيل واسع من 3V إلى 24V DC
- استهلاك تيار منخفض نحو 12mA فقط
- دائرة توليد مدمجة تعطي صوتاً فورياً بلا إشارة خارجية
- صوت متواصل مناسب لتنبيهات الأعطال والإنذار
- يمكن قيادته من ترانزستور صغير أو مخرج مرحّل
- أطراف سلكية تناسب اللوحات المثقوبة والعلب
الاستخدامات الشائعة
- تنبيهات الأعطال في لوحات التحكم
- أنظمة الإنذار المنزلية وكواشف الحركة
- مشاريع Arduino وESP32 التي تحتاج تنبيهاً مسموعاً
- أجهزة القياس والمؤقتات الصناعية
ملاحظة: راعِ القطبية عند التوصيل، ولا توصله مباشرة بطرف متحكم يعمل على 3.3V إن كانت الفولتية المطلوبة أعلى، بل استعمل ترانزستور NPN مع مقاومة قاعدة مناسبة.
What's in the box
بزّار إلكتروني فعّال واحد يعمل من 3V إلى 24V
Specifications
| Buzzer type | فعّال Active بدائرة توليد مدمجة |
|---|---|
| Operating voltage | 3V – 24V DC |
| Current draw | نحو 12mA |
| Sound type | نغمة متواصلة |
| Terminals | طرفان سلكيان |
| Body material | بلاستيك مغلق |
| طريقة التشغيل | جهد مستمر مباشر بلا PWM |
| القطبية | مطلوبة، طرف موجب وطرف سالب |
| طريقة التركيب | سلكي THT أو داخل علبة الجهاز |
| طريقة القيادة | ترانزستور NPN أو مخرج مرحّل |
| شدة الصوت | تزداد مع ارتفاع فولتية التغذية |
| التطبيق النموذجي | تنبيهات ولوحات تحكم ودوائر إنذار |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Electromechanical components & connectors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0105 |




