Current sensor
حساس تيار موديل ACS758LCB-050B لقياس التيار المتناوب والمستمر حتى 50 أمبير | ACS758LCB-050B AC/DC Current Sensor Module, Up to 50A
حساس تيار موديل ACS758LCB-050B لقياس التيار المتناوب والمستمر حتى 50 أمبير | ACS758LCB-050B AC/DC Current Sensor Module, Up to 50A — 9,025 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- ACS758LCB-050B Hall-effect chip
- Measures AC and DC current up to 50A
- Full electrical isolation
- Analog output proportional to current
- 5 volt operation
Ask about stock or request a better price
Price
9,025IQDIts price has held at 9,500 IQD for the last 11 days.
About this item
ACS758LCB-050B Hall-effect current sensor measuring AC and DC current up to 50A with full electrical isolation and analog output.
This is a current sensor built on the ACS758LCB-050B chip. It measures AC and DC current up to 50A using the Hall effect, meaning there is no electrical connection between the measuring circuit and the circuit being measured. That full electrical isolation is the core benefit: you can measure the current of a load running on 220 volts and read the result on a 5 volt microcontroller safely.
The operating voltage is 5 volts, the output is analog and proportional to the current, the internal resistance is very low which reduces losses, and the response is fast enough to catch current pulses. It is typically used to monitor the consumption of electrical loads, in battery management and charging systems, to protect motors from overload, and in solar power systems.
An important programming point: the zero point of the output sits at half the supply voltage, so the output centers there when the current is zero. Read this reference value at start-up and subtract it from every reading, otherwise the results will be offset. The box contains a single sensor, and the condition is new with a 1-month warranty.
Suitable for
- Monitoring electrical load consumption
- Battery management and charging systems
- Protecting motors from overload
- Solar power systems
Seller's description
حساس تيار مبني على رقاقة ACS758 يقيس التيار المتناوب والمستمر حتى 50 أمبير بمبدأ تأثير هول، أي بلا اتصال كهربائي بين دائرة القياس والدائرة المقاسة. هذه العزلة هي جوهر الفائدة: تقيس تيار حمل يعمل على 220 فولت وتقرأ النتيجة على ميكروكونترولر 5 فولت بأمان تام.
أبرز المزايا
- يقيس التيار المتناوب والمستمر حتى 50 أمبير
- عزل كهربائي كامل بمبدأ تأثير هول
- مقاومة داخلية منخفضة جداً تقلل الفقد
- خرج تناظري متناسب مع التيار
- استجابة سريعة تكشف نبضات التيار
الاستخدامات الشائعة
- مراقبة استهلاك الأحمال الكهربائية
- أنظمة إدارة البطاريات والشحن
- حماية المحرّكات من الحمل الزائد
- أنظمة الطاقة الشمسية والمراقبة
ملاحظة: خرج الحساس يتمركز عند نصف فولتية التغذية عند التيار الصفري؛ اقرأ هذه القيمة المرجعية في بداية التشغيل واطرحها من كل قراءة، وإلا كانت النتائج مزاحة كلياً.
What's in the box
حساس تيار ACS758LCB-050B واحد
Specifications
| Chip | ACS758LCB-050B |
|---|---|
| Type | حساس تيار بتأثير هول |
| Measuring range | حتى 50 أمبير |
| Current type | متناوب ومستمر |
| Output type | تناظري متناسب مع التيار |
| Operating voltage | 5 فولت |
| العزل | كهربائي كامل |
| المقاومة الداخلية | منخفضة جداً |
| نقطة الصفر | عند نصف فولتية التغذية |
| الاستعمال النموذجي | مراقبة الاستهلاك وأنظمة البطاريات |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT sensors |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0627 |




